Free Essay

Mode Bill 2012

In: Science

Submitted By tmtang
Words 71251
Pages 286
ARCHITECTURAL SERVICES DEPARTMENT

MODEL BILLS OF QUANTITIES FOR BUILDING WORKS

The Government of The Hong Kong Special Administrative Region Architectural Services Department Quantity Surveying Branch

Queensway Government Offices 66 Queensway Hong Kong

2012 EDITION

CONTENTS Demolitions and Alterations Piling and Caissons Diaphragm Walling Excavation Underpinning Concrete Works Brickwork and Blockwork Drainage (including Underground Pipe Ducts) Waterproofing Stone Works Roof Tiling Wood Works Ironmongery Steel and Metal Works Plastering and Paving Plumbing and Water Supply Systems Glazing Painting Landscaping External Works Electrical Installation Air Conditioning Installation Fire Service Installation Low Voltage Cubicle Switchboards Installation Diesel Generating Sets Installation Uninterruptible Power Supply System Broadcast Reception Installation Compressed Air System Steam Boiler System Liquefied Petroleum Gas Installation Fuel Supply System Swimming Pool Water Treatment Installation MODBQ.1/1 MODBQ.2/1 MODBQ.3/1 MODBQ.4/1 MODBQ.5/1 MODBQ.6/1 MODBQ.7/1 MODBQ.8/1 MODBQ.9/1 MODBQ.10/1 MODBQ.11/1 MODBQ.12/1 MODBQ.13/1 MODBQ.14/1 MODBQ.15/1 MODBQ.16/1 MODBQ.17/1 MODBQ.18/1 MODBQ.19/1 MODBQ.20/1 MODBQ.21/1 MODBQ.22/1 MODBQ.23/1 MODBQ.24/1 MODBQ.25/1 MODBQ.26/1 MODBQ.27/1 MODBQ.28/1 MODBQ.29/1 MODBQ.30/1 MODBQ.31/1 MODBQ.32/1 6 22 3 8 4 18 7 12 10 7 3 23 8 22 30 19 5 10 7 19 27 55 30 9 5 4 10 6 10 9 7 14

Bill Nr. MODBQ.1 DEMOLITIONS AND ALTERATIONS DEMOLITIONS Demolishing or taking down to ground level Individual structures A * x * x * high to parapet ; * storeys ; reinforced concrete framed building ; as delineated on drawing nr. * ; shoring and scaffolding ( ACCD) * x * x * high to ridge ; * storeys ; steel framed building ; located at * ; materials remaining the property of Employer ; setting aside and storing materials on site ; shoring and scaffolding ( ACCD) All structures C * x * x * high ; * storeys ; reinforced concrete framed building ; shoring and scaffolding ( ACCD) REMOVAL OF ASBESTOS-CONTAINING MATERIALS Design, provision, installation, inspection, testing, supervision, monitoring, sampling, maintenance, cleaning up and subsequent removal of the special precautionary measures ; as specified in Appendix * for the controlled removal and disposal of asbestos-containing materials ; as identified in drawing nr. * Decontamination facilities including three-chamber air lock, negative air pressure ventilation and air filtration system, air monitoring and sampling and complete sealing of floor, wall and ceiling D */F ( ACCD) item -

-

item

-

B

-

item

-

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/1

To C olle ction

$

DEMOLITIONS AND ALTERATIONS REMOVAL OF ASBESTOS-CONTAINING MATERIALS (Cont'd) Temporary barriers and hoardings completed with warning signs A */F Waste disposal facilities including temporary containment barriers B */F Respirators and protective clothing C */F Removal and disposal of asbestos-containing materials ; as identified in drawing nr. * Corrugated cement sheets D */F ; * m2 Hollow cement pipes E */F ; * m2 ALTERATIONS Alteration works to existing first floor office areas ; as delineated on drawing nr. * Cutting or enlarging openings through reinforced concrete walls * thick ; quoining up jambs ; extending finishings and making good ; shoring and scaffolding F * wide x * high ( ACCD) item ( ACCD) item ( ACCD) item ( ACCD) item ( ACCD) item ( ACCD) item -

Cutting or enlarging openings through brick walls * thick ; cutting and pinning * x * precast concrete grade 20/20 lintol over reinforced with two 16 diameter plain steel bars ; quoining up jambs ; extending finishings and making good ; shoring and scaffolding G * wide x * high ( ACCD) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/2

To C olle ction

$

DEMOLITIONS AND ALTERATIONS ALTERATIONS (Cont'd) Blocking up or partially blocking up openings through walls ; reinforced concrete grade */* * thick ; formwork ; cutting, toothing and bonding to existing each alternate course ; extra material ; extending finishings and making good A * wide x * high ( ACCD) item -

Pulling down brick walls ; approximately *m x *m ; shoring and scaffolding B one brick thick ( ACCD) item -

Taking down fittings and fixtures ; setting aside materials for re-use ; protecting ; extending and making good * C D * x * x * hardwood doors ; * nr. ( ACCD) * x * x * hardwood cupboards ; * nr. ( ACCD) * x * x * vitreous china wash hand basins ; * nr. ( ACCD) Taking down existing windows and replacing with new ; setting aside and storing the materials on site ; protecting ; extending and making good * F * x * aluminium windows including frames, glass and ironmongery ; replacing with * ; * nr. ( ACCD) Hacking off finishings and removing from site ; preparing background to receive new finishings ; approximately * m2 G plastering ; * thick overall ; walls and columns plastering ; * thick overall ; ceilings and beams item -

-

item

-

E

-

item

-

-

item

-

( ACCD)

-

item

-

H

( ACCD)

-

item

-

J

glazed wall tiling and backing ; * thick overall ; walls and columns ( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/3

To C olle ction

$

DEMOLITIONS AND ALTERATIONS ALTERATIONS (Cont'd) Repairing, adapting and refixing existing fittings and fixtures A * x * x * hardwood doors ; hanging ; * nr. ( ACCD) * x * x * hardwood cupboards ; plugging ; * nr.

-

item

-

B

( ACCD)

-

item

-

C

* x * vitreous china wash hand basins ; cutting and pinning brackets ; connections to service pipes ; * nr. ( ACCD) vitreous china w.c. suites ; plugging ; connections to service pipes ; * nr. ( ACCD) Stripping out plumbing and engineering services ; located at * ; protecting ; temporarily diverting, maintaining or sealing off existing services

-

item

-

D

-

item

-

E

* installation SUNDRIES Temporary screens

( ACCD)

-

item

-

Dustproof screens ; temporary doors size * x * ; * nr. F providing ; erecting ; maintaining ; altering and adapting as necessary during the Contract ; removing on completion ; making good all work disturbed ( ACCD) * x * ; providing ; erecting ; maintaining ; altering and adapting as necessary during the Contract ; removing on completion ; making good all work disturbed ( ACCD)

m2

G

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/4

To C olle ction

$

DEMOLITIONS AND ALTERATIONS SUNDRIES (Cont'd) Shoring Raking shores ; to walls or columns of existing brick structure ; as delineated on drawing nr. * ; propping against edge of suspended floors at first, second and third floor levels A providing ; erecting ; maintaining * months ; cutting holes and pockets in the structure ; clearing away on completion ; making good all work disturbed ( ACCD) Flying shores ; to walls or columns of existing brick structure ; as delineated on drawing nr. * ; propping against edge of suspended floors at fourth, fifth and sixth floor levels B providing ; erecting ; maintaining * months ; cutting holes and pockets in the structure ; clearing away on completion ; making good all work disturbed ( ACCD) CREDIT VALUE Allowing credit For the value of materials C D arising from demolitions arising from alterations ( ACCD) ( ACCD) item item -

-

item

-

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/5

To C olle ction

$

DEMOLITIONS AND ALTERATIONS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. MODBQ.1/1 MODBQ.1/2 MODBQ.1/3 MODBQ.1/4 MODBQ.1/5 ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.1 - DEMOLITIONS AND ALTERATIONS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.1/6

Bill Nr. MODBQ.2 PILING AND CAISSONS STEEL SHEET PILING Plant Providing and assembling on site ; subsequently dismantling and removing A piling equipment ( ACCD) item -

Supplying, handling, transporting and pitching sheet piles Units * x * overall ; * thick weldable structural steel to BS EN 10025 grade S275 ; Frodingham Section 1B B design length *m ; vertical Extra over units * x * overall ; Frodingham Section 1B for C D E corner piles ; * degrees junction piles ; * degrees ( ACCD) ( ACCD) m m (ACCD) m2

non standard make up piles with interlocked width of * ( ACCD) Units * x * overall ; * thick weldable structural steel to BS EN 10025 grade S275 ; section modulus * cm3/m

m

F

design length *m ; vertical

( ACCD)

m2

Extra over units * x * overall ; section modulus * cm3/m for G H J corner piles ; * degrees junction piles ; * degrees ( ACCD) ( ACCD) m m

non standard make up piles with interlocked width of * ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/1

To C olle ction

$

PILING AND CAISSONS STEEL SHEET PILING (Cont'd) Driving sheet piles Units * x * overall ; Frodingham Section 1B A B vertical on rake Extra over units * x * overall ; Frodingham Section 1B for C corner piles ; * degrees ; vertical ( ACCD) ( ACCD) m2 m2

( ACCD)

m

D

corner piles ; * degrees ; on rake ( ACCD) junction piles ; * degrees ; vertical

m

E

( ACCD)

m

F

junction piles ; * degrees ; on rake ( ACCD) non standard make up piles with interlocked width of * ; vertical ( ACCD) non standard make up piles with interlocked width of * ; on rake ( ACCD) Units * x * overall ; section modulus * cm3/m

m

G

m

H

m

J K

vertical on rake

( ACCD) ( ACCD)

m2 m2

Extra over units * x * overall ; section modulus * cm3/m for L corner piles ; * degrees ; vertical

( ACCD)

m

M

corner piles ; * degrees ; on rake ( ACCD) junction piles ; * degrees ; vertical

m

N

( ACCD)

m

P

junction piles ; * degrees ; on rake ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/2

To C olle ction

$

PILING AND CAISSONS STEEL SHEET PILING (Cont'd) A non standard make up piles with interlocked width of * ; vertical ( ACCD) non standard make up piles with interlocked width of * ; on rake ( ACCD) Underground obstructions Excavating, breaking up and removing C underground obstructions ; backfilling ; removing surplus material from site ( ACCD) Withdrawing sheet piles Withdrawn units becoming Contractor's property ; (allowing for credit value measured separately) ; removing from site D units * x * overall ; Frodingham Section 1B ( ACCD) units * x * overall ; section modulus * cm3/m Sundries Cutting or burning through sheet piling ; cutoffs becoming Contractor's property ; (allowing for credit value measured separately) F units * x * overall ; Frodingham Section 1B ( ACCD) units * x * overall ; section modulus * cm3/m

m

B

m

-

item

-

m2

E

( ACCD)

m2

m

G

( ACCD)

m

Cutting or burning holes through sheet piling H units * x * overall ; Frodingham Section 1B ; * diameter ( ACCD) units * x * overall ; section modulus * cm3/m ; * diameter

nr

J

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/3

To C olle ction

$

PILING AND CAISSONS STEEL SHEET PILING (Cont'd) Temporary strutting and shoring ; lateral support ; designed by a Registered Structural Engineer Providing, erecting, maintaining, altering and adapting as necessary ; dismantling ; removing from site A piling face *m long x *m high ( ACCD) item -

Temporary strutting and shoring ; lateral support ; hot-rolled steel to BS EN 10025 grade * ; welded fabrication ; altering and adapting as necessary ; dismantling ; removing from site Walings and strutting B C * x * x * kg universal columns * x * x * kg joists Connections, caps and bases D * x * x * kg angles ; in cleats, brackets, plates, packing pieces, etc. ( ACCD) * thick plates ; in * ( ACCD) ( ACCD) ( ACCD) kg kg

kg kg

E

Temporary pedestals and anchor blocks for temporary strutting and shoring ; breaking up after use ; removing from site ; making good the permanent structure Reinforced concrete ; grade */* F pedestal (In Nr. 0) ( ACCD) m3

Reinforcement ; plain steel bars ; links, stirrups and binders ; PROVISIONAL G round bars ; * diameter ( ACCD) kg

Reinforcement ; deformed high yield steel bars ; general reinforcement ; PROVISIONAL H round bars ; * diameter Sawn formwork J vertical surfaces of pedestal ( ACCD) m2 ( ACCD) kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/4

To C olle ction

$

PILING AND CAISSONS STEEL SHEET PILING (Cont'd) Credit value Allowing for the credit value of materials A arising from offcuts of Frodingham Section 1B sheet piles ; becoming Contractor's property ; removing from site ( ACCD) arising from withdrawn units of Frodingham Section 1B sheet piles ; becoming Contractor's property ; removing from site ( ACCD) PRECAST CONCRETE PILES Plant Providing and assembling on site ; subsequently dismantling and removing C piling equipment ( ACCD) item -

m

B

m2

Supplying piles ; sulphate resisting ; grade */* Piles D E * diameter (In Nr. 0) ( ACCD) m

heads ; weighing * kg ; to suit * diameter piles ( ACCD) shoes ; weighing * kg ; to suit * diameter piles ( ACCD) Trial piles

nr

F

nr

G H

* diameter (In Nr.0)

( ACCD)

m

heads ; weighing * kg ; to suit * diameter piles ( ACCD) shoes ; weighing * kg ; to suit * diameter piles ( ACCD) Reinforcement Plain steel bars ; links, stirrups and binders ; PROVISIONAL

nr

J

nr

K

round bars ; * diameter

( ACCD)

kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/5

To C olle ction

$

PILING AND CAISSONS PRECAST CONCRETE PILES (Cont'd) Deformed high yield steel bars ; general reinforcement ; PROVISIONAL A round bars ; * diameter ( ACCD) kg

Deformed high yield steel bars ; helical reinforcement ; PROVISIONAL B round bars ; * diameter ( ACCD) kg

Handling, transporting and pitching piles Piles C * diameter (In Nr. 0) Trial piles D * diameter (In Nr. 0) Pre-boring Holes E for * diameter piles ; vertical ; *m maximum depth ; grouting up voids between sides of piles and bores with * ( ACCD) Driving piles Piles F G * diameter ; vertical ( ACCD) m m ( ACCD) m ( ACCD) m

m

* diameter ; on rake ; * degrees ( ACCD) Trial piles

H J

* diameter ; vertical

( ACCD)

m m

* diameter ; on rake ; * degrees ( ACCD) Underground obstructions Excavating, breaking up and removing

K

underground obstructions ; backfilling ; removing surplus material from site ( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/6

To C olle ction

$

PILING AND CAISSONS PRECAST CONCRETE PILES (Cont'd) Pile head treatments Cutting off heads of piles ; straightening or bending and cleaning projecting reinforcement ; removing debris from site A * diameter Cement grouting B exposed dowel bars of each pile ( ACCD) Testing Compaction tests to determine C the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL nr ( ACCD) nr

( ACCD)

nr

D

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Loading tests

nr

E F G

initial subsequent ; PROVISIONAL

( ACCD) ( ACCD)

nr nr

subsequent ; providing new loading platform and kentledge ; PROVISIONAL ( ACCD) Non-destructive integrity test of piles ; preparing ; executed by an approved Testing Firm

nr

H

dynamic test ; PROVISIONAL

( ACCD)

nr

CAST IN-SITU CONCRETE PILES IN DRIVEN CASINGS Plant Providing and assembling on site ; subsequently dismantling and removing J piling equipment ( ACCD) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/7

To C olle ction

$

PILING AND CAISSONS CAST IN-SITU CONCRETE PILES IN DRIVEN CASINGS (Cont'd) Supplying, handling, transporting, pitching, driving and withdrawing steel casings ; boring or excavation ; removal of bored or excavated materials Pile casings ; * wall thickness A * diameter internally ; vertical (In Nr. 0) ( ACCD) * diameter internally ; on rake ; * degrees (In Nr. 0) ( ACCD) shoes ; weighing * kg ; to suit * diameter casings ( ACCD) Trial pile casings ; * wall thickness D * diameter internally ; vertical (In Nr.0) ( ACCD) shoes ; weighing * kg ; to suit * diameter casings ( ACCD) Extra over for F excavation and special casings for enlarged bases ; * ; to suit * diameter piles internally ( ACCD) excavation for and removal of surface and underground obstructions ; backfilling to excavation ; removing surplus material from site Reinforced concrete ; grade */* Piles H * diameter (In Nr. 0) Trial piles J * diameter (In Nr. 0) Extra over * diameter piles for K enlarged bases ; * diameter ( ACCD) nr ( ACCD) m ( ACCD) m

m

B

m

C

nr

m

E

nr

nr

G

( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/8

To C olle ction

$

PILING AND CAISSONS CAST IN-SITU CONCRETE PILES IN DRIVEN CASINGS (Cont'd) Extra over * diameter trial piles for A enlarged bases ; * diameter Reinforcement Plain steel bars ; links, stirrups and binders ; PROVISIONAL B round bars ; * diameter ( ACCD) kg ( ACCD) nr

Deformed high yield steel bars ; general reinforcement ; PROVISIONAL C round bars ; * diameter ( ACCD) kg

Deformed high yield steel bars ; helical reinforcement ; PROVISIONAL D round bars ; * diameter Pile head treatments Cutting off heads of piles ; straightening or bending and cleaning projecting reinforcement ; removing debris from site E * diameter ; in length 1.00 2.50m Cement grouting F exposed dowel bars of each pile ( ACCD) Testing Compaction tests to determine G the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL nr ( ACCD) kg

( ACCD)

nr

( ACCD)

nr

H

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Loading tests

nr

J K

initial subsequent ; PROVISIONAL

( ACCD) ( ACCD)

nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/9

To C olle ction

$

PILING AND CAISSONS CAST IN-SITU CONCRETE PILES IN DRIVEN CASINGS (Cont'd) A subsequent ; providing new loading platform and kentledge ; PROVISIONAL ( ACCD) Non-destructive integrity test of piles ; preparing ; executed by an approved Testing Firm B pile integrity test ; PROVISIONAL ( ACCD) BORED PILES Plant Providing and assembling on site ; subsequently dismantling and removing C piling equipment Boring Pile holes ; removing surplus excavated material from site D * diameter ; for piles ; vertical ; total length not exceeding 10.00m (In Nr. 0) ( ACCD) * diameter ; for trial piles ; vertical ; total length 10.00 15.00m (In Nr. 0) ( ACCD) Extra over pile holes for F G enlarged bases ; * diameter ( ACCD) nr ( ACCD) item -

nr

nr

m

E

m

toeing into bedrock ; 0.50 - 1.00m length (In Nr. 0) ( ACCD) Underground obstructions Excavating, breaking up and removing

m

H

underground obstructions ; backfilling ; removing surplus material from site ( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/10

To C olle ction

$

PILING AND CAISSONS BORED PILES (Cont'd) Reinforced concrete ; sulphate resisting ; grade */* Filling to pile holes A * diameter (In Nr. 0) Filling to trial pile holes B * diameter (In Nr. 0) Extra over filling to pile holes for C enlarged bases ; * diameter ( ACCD) nr ( ACCD) m ( ACCD) m

Extra over filling to trial pile holes for D enlarged bases ; * diameter Reinforcement Plain steel bars ; links, stirrups and binders ; PROVISIONAL E round bars ; * diameter ( ACCD) kg ( ACCD) nr

Deformed high yield steel bars ; general reinforcement ; PROVISIONAL F round bars ; * diameter ( ACCD) kg

Deformed high yield steel bars ; helical reinforcement ; PROVISIONAL G round bars ; * diameter Pile head treatments Cutting off heads of piles ; straightening or bending and cleaning projecting reinforcement H * diameter pile Cement grouting J exposed dowel bars of each pile ( ACCD) nr ( ACCD) nr ( ACCD) kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/11

To C olle ction

$

PILING AND CAISSONS BORED PILES (Cont'd) Testing Compaction tests to determine A the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL

( ACCD)

nr

B

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Loading tests

nr

C D E

initial subsequent ; PROVISIONAL

( ACCD) ( ACCD)

nr nr

subsequent ; providing new loading platform and kentledge ; PROVISIONAL ( ACCD) Concrete coring test ; commencing at a depth not exceeding 15.00m

nr

F

* diameter core to * diameter pile ; subsequently pressure grouting with cement and sand (1:3) (In Nr. 0) ( ACCD) Non-destructive integrity test of piles ; preparing ; executed by an approved Testing Firm

m

G

sonic tests ; * nr. sonic tubes ; subsequently pressure grouting with cement and sand (1:3) ; PROVISIONAL ( ACCD) STEEL PILES Plant Providing and assembling on site ; subsequently dismantling and removing

m

H

piling equipment

( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/12

To C olle ction

$

PILING AND CAISSONS STEEL PILES (Cont'd) Pre-boring Holes A for * diameter piles ; vertical ; grouting up voids between sides of piles and bores with * ; not exceeding 10.00m (In Nr. 0) ( ACCD) Supplying piles "H" section piles ; steel to BS EN 10025 grade * ; * thick ; weighing * kg/m ; section modulus * cm3/m B * x * (In Nr. 0) ( ACCD) m

m

Handling, transporting and pitching piles Piles C * x * "H" Section piles ; vertical (In Nr. 0) ( ACCD) Driving piles Piles D * x * "H" Section piles ; vertical (In Nr. 0) ( ACCD) * x * "H" Section piles ; on rake ; * degrees (In Nr. 0) ( ACCD) Dollying piles below ground F * x * "H" Section piles ; vertical (In Nr. 0) ( ACCD) Underground obstructions Excavating, breaking up and removing G underground obstructions ; backfilling ; removing surplus material from site ( ACCD) Pile head treatments Cutting off heads of piles ; removing debris from site H * x * "H" Section piles ( ACCD) nr

m

m

E

m

m

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/13

To C olle ction

$

PILING AND CAISSONS STEEL PILES (Cont'd) Testing Compaction tests to determine A the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL

( ACCD)

nr

B

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Loading tests

nr

C D E

initial subsequent ; PROVISIONAL

( ACCD) ( ACCD)

nr nr

subsequent ; providing new loading platform and kentledge ; PROVISIONAL ( ACCD) CAISSONS Plant Providing and assembling on site ; subsequently dismantling and removing

nr

F

piling equipment Setting up Caissons

( ACCD)

nr

G

* effective design diameter Excavating

( ACCD)

nr

Shafts for caissons ; commencing at natural ground level ; removing surplus excavated material from site H * effective design diameter ; not exceeding 1.50m deep ( ACCD) * effective design diameter ; * *m deep ( ACCD)

m

J

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/14

To C olle ction

$

PILING AND CAISSONS CAISSONS (Cont'd) Extra over shaft excavation at any depth for A breaking up rock ; removing from site ; PROVISIONAL ( ACCD) excavating enlarged bases ; * diameter shaft ; * diameter ; belling out * high

m3

B

( ACCD)

nr

Contractor designed linings ; submitting design for Architect's approval Linings C D * minimum internal diameter to enlarged bases ; * minimum internal diameter ( ACCD) m

( ACCD)

nr

Breaking up linings above finished casting level of concrete core ; associated excavation ; removing material from site E * minimum internal diameter (In Nr. 0) ( ACCD) Reinforced concrete ; incorporating chemical retarder ; grade */* Cores F * minimum internal diameter Extra over cores for G enlarged bases ; * diameter Reinforcement Plain steel bars ; links, stirrups and binders ; PROVISIONAL H round bars ; * diameter ( ACCD) kg ( ACCD) nr ( ACCD) m

m

Deformed high yield steel bars ; general reinforcement ; PROVISIONAL J round bars ; * diameter ( ACCD) kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/15

To C olle ction

$

PILING AND CAISSONS CAISSONS (Cont'd) Deformed high yield steel bars ; helical reinforcement ; PROVISIONAL A round bars ; * diameter Caisson head treatments Straightening or bending and cleaning protecting reinforcement B * diameter caisson Cement grouting C exposed dowel bars of each pile ( ACCD) Sundries Plastic sleeves for rock anchors ; casting into concrete D * diameter (In Nr. 0) Testing Compaction tests to determine E the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) m nr ( ACCD) nr ( ACCD) kg

( ACCD)

nr

F

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Providing and assembling ; subsequently dismantling and removing from site

nr

G

drilling and coring equipment

( ACCD)

-

item

-

Penetration drill testing of bedrock at shaft bottoms ; commencing at a depth not exceeding 15.00m below commencing level of caisson excavation H * size pneumatic rock drill ; subsequently pressure grouting with cement and sand (1:3) (In Nr. 0) ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/16

To C olle ction

$

PILING AND CAISSONS CAISSONS (Cont'd) Drilling test cores in concrete caissons and a further 600 into bedrock below ; commencing at a depth not exceeding 15.00m deep A * diameter core ; subsequently pressure grouting with cement and sand (1:3) (In Nr. 0) ( ACCD) CAISSON INFILL PANELS Excavating Into banks ; between and behind * diameter caissons at * - *m centres B generally ( ACCD) m3

m

Extra over excavation and disposal at any depth for Breaking up and removing C concrete Filling Excavated material D backfilling to excavation ; depositing in * layers ; compacting Disposal Surplus excavated material E removing from site to a tip provided by Contractor Reinforced concrete ; grade */* Infill panel F * thick Beams G generally ( ACCD) m3 ( ACCD) m3 ( ACCD) m3

( ACCD)

m3

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/17

To C olle ction

$

PILING AND CAISSONS CAISSON INFILL PANELS (Cont'd) Reinforcement Plain steel bars ; links, stirrups and binders ; PROVISIONAL A round bars ; * diameter ( ACCD) kg

Deformed high yield steel bars ; general reinforcement ; PROVISIONAL B round bars ; * diameter Sawn formwork Vertical surfaces C infill panels Flat surfaces D E F soffits of infill panels sides and soffits of beams sides and soffits of beams ; exceeding 750 deep Sundries Applying two coats of bituminous paint G on concrete surfaces Horizontal land drains Providing and assembling plant on site ; subsequently dismantling and removing H drilling equipment for boring horizontal drains ( ACCD) m2 ( ACCD) ( ACCD) m2 m2 ( ACCD) m2 ( ACCD) kg

( ACCD)

m2

( ACCD)

-

item

-

Boring holes in ground ; removing surplus material from site J for * diameter drain pipes (In Nr. 0) ( ACCD) Boring holes in rock ; removing surplus material from site K for * diameter drain pipes (In Nr. 0) ( ACCD)

m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/18

To C olle ction

$

PILING AND CAISSONS

ROCK ANCHORS Plant Providing and assembling on site ; subsequently dismantling and removing A B drilling equipment tendon platform Setting up Anchors C type * Trial anchors D type * ( ACCD) nr ( ACCD) nr ( ACCD) ( ACCD) item item -

Supplying ; drilling ground and installing rock anchors as drawing nr. * Free length of anchors ; * degrees from horizontal E type * ; *m total length ( ACCD) nr

Free length of trial anchors ; * degrees from horizontal F type * ; *m total length ( ACCD) nr

Fixed length of anchors ; * degrees from horizontal G type * ; *m total length ( ACCD) nr

Fixed length of trial anchors ; * degrees from horizontal H type * ; *m total length ( ACCD) nr

Supplying and installing anchor heads as drawing nr. * Anchor heads for J K type * anchors type * trial anchors ( ACCD) ( ACCD) nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/19

To C olle ction

$

PILING AND CAISSONS ROCK ANCHORS (Cont'd) Destressing anchors Trial anchors A type * Testing Water testing B C fixed lengths of anchor holes ( ACCD) nr ( ACCD) nr

pressure grouting *m lengths of anchor holes after water test failure ; re-drilling holes ( ACCD) Load testing

nr

D

simple stressing tests on type * anchors ; * times design load ( ACCD) simple stressing tests on type * trial anchors ; * times design load ( ACCD) comprehensive stressing tests on type * anchors ; * times design load ( ACCD) comprehensive stressing tests on type * trial anchors ; * times design load ( ACCD) Blast testing

nr

E

nr

F

nr

G

nr

H

on trial anchors ; explosion of test charges in earthworks ( ACCD) on trial anchors ; explosion of test charges in caissons ( ACCD) Sample testing

nr

J

nr

K

allowing for testing one sample of each material used in the rock anchor system ( ACCD) Load monitoring Lift off tests ; initial ; * hours after lock off

-

item

-

L

to type * anchors

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/20

To C olle ction

$

PILING AND CAISSONS ROCK ANCHORS (Cont'd) A to type * trial anchors Lift off tests ; subsequent B to type * anchors ( ACCD) nr ( ACCD) nr

Lift off tests ; subsequent ; executing in Maintenance Period C to type * anchors Load cells ; supplying ; installing D E to type * anchors to type * trial anchors ( ACCD) ( ACCD) nr nr ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/21

To C olle ction

$

PILING AND CAISSONS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.2/1 MODBQ.2/2 MODBQ.2/3 MODBQ.2/4 MODBQ.2/5 MODBQ.2/6 MODBQ.2/7 MODBQ.2/8 MODBQ.2/9 MODBQ.2/10 MODBQ.2/11 MODBQ.2/12 MODBQ.2/13 MODBQ.2/14 MODBQ.2/15 MODBQ.2/16 MODBQ.2/17 MODBQ.2/18 MODBQ.2/19 MODBQ.2/20 MODBQ.2/21 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.2 - PILING AND CAISSONS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.2/22

Bill Nr. MODBQ.3 DIAPHRAGM WALLING DIAPHRAGM WALLING The following in diaphragm walls ; *m long x *m deep overall ; as drawing nr. * ; adjacent to existing structure Providing and assembling plant on site ; subsequently dismantling and removing A diaphragm walling equipment ( ACCD) item -

Excavating trenches * wide for * thick diaphragm walls ; commencing at reduced level B maximum depth *m ; removing surplus excavated materials from site ( ACCD) Extra over excavation and disposal at any depth for breaking up and removing C bedrock Concrete ; grade */* D temporary guide walls ; one side ; * wide x * deep ; excavating and disposal ; formwork ; breaking up and removing on completion of diaphragm walls ( ACCD) Reinforced concrete ; grade */* ; placing by tremie pipe E diaphragm walls ; * thick ( ACCD) m3 ( ACCD) m3

m3

m

Plain steel bars ; links, stirrups and binders F round bars ; * diameter ; PROVISIONAL

( ACCD)

kg

Deformed high yield steel bars ; general reinforcement G round bars ; * diameter ; PROVISIONAL

( ACCD)

kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.3/1

To C olle ction

$

DIAPHRAGM WALLING DIAPHRAGM WALLING (Cont'd) Sawn formwork ; vertical surfaces A diaphragm walls ( ACCD) m2

Trimming and cleaning faces of diaphragm walls B * finish ( ACCD) m2

Preparing tops of diaphragm walls ; to receive * ; straightening or bending and cleaning projecting reinforcement C * thick Waterproof joints D in walls ; as drawing nr. Guide walls ; one side E * Ancillary works F preparing cast-in pockets ; * x * x * deep ; formwork ; filling and making good all works disturbed ( ACCD) Testing G * ( ACCD) nr ( ACCD) m ( ACCD) m ( ACCD) m

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.3/2

To C olle ction

$

DIAPHRAGM WALLING C O L L E C T I O N Page No. Page No. MODBQ.3/1 MODBQ.3/2 ...................................... ......................................

Bill Nr. MODBQ.3 - DIAPHRAGM WALLING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.3/3

Bill Nr. MODBQ.4 EXCAVATION SITE PREPARATION Site clearance Clearing the site A removing off site or burning all rubbish, tall grass, shrubs, bushes and the like and trees not exceeding 600 girth, including grubbing up roots ( ACCD) Disposal of existing spoil heaps or rubbish dumps left by previous contractors B removing off site ; to a dumping area provided by Employer ; average *m from excavation ( ACCD) Cutting down trees C * to * girth ; providing and maintaining temporary identity labels or markings ; grubbing up roots and removing off site or burning ; filling voids with * ( ACCD) Cutting down trees ; not in open area D 0.60 - 0.90m girth ( ACCD) nr

-

item

-

-

item

-

nr

Removing existing tree stumps (tree cut by others) E * ; filling voids with * Cutting turf to be preserved F average * thick ; stacking on site ; for future use ( ACCD) Stripping top soil for preservation G average * deep ; depositing in separate spoil heaps ; on site ( ACCD) ( ACCD) nr

m2

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/1

To C olle ction

$

EXCAVATION SITE PREPARATION (Cont'd) Preserving trees A * to * girth ; providing and maintaining temporary identity labels or markings ; including all temporary works ( ACCD) EXCAVATION Excavating Over site to reduce levels B over 0.20m in average depth Surface excavation C average * deep Into sides of banks D generally ( ACCD) m3 ( ACCD) m2 ( ACCD) m3

nr

Basements and similar ; commencing at site formation level E F G not exceeding 1.50m deep 1.50 - 3.00m deep 3.00 - 4.50m deep ( ACCD) ( ACCD) ( ACCD) m3 m3 m3

Surface trenches ; commencing at site formation level H J K not exceeding 1.50m deep 1.50 - 3.00m deep 3.00 - 4.50m deep ( ACCD) ( ACCD) ( ACCD) m3 m3 m3

Pits for pile caps ; commencing at site formation level L M N not exceeding 1.50m deep 1.50 - 3.00m deep 3.00 - 4.50m deep ( ACCD) ( ACCD) ( ACCD) m3 m3 m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/2

To C olle ction

$

EXCAVATION EXCAVATION (Cont'd) Trenches for curbs * x * ; with beds ; commencing at site formation level ; not exceeding 1.50m deep A 0.25m average depth ( ACCD) m

Trenches for pipes or cables not exceeding 55 diameter ; with beds ; commencing at site formation level ; not exceeding 1.50m deep B 0.75m average depth ( ACCD) m

Trenches for pipes or cables exceeding 55 - 110 diameter, without beds ; commencing at site formation level ; not exceeding 1.50m deep C 1.00m average depth ( ACCD) m

Post holes ; commencing at site formation level D not exceeding 0.30m3 ( ACCD) nr

Extra over excavation and disposal at any depth for Breaking up and removing materials met with in excavation E F concrete pavings * thick ( ACCD) m2

concrete pavings * thick ; with hardcore under ( ACCD) brickwork blockwork slab foundations reinforced concrete FILLING AND DISPOSAL Filling Excavated material ( ACCD) ( ACCD) ( ACCD) ( ACCD)

m2 m3 m3 m3 m3

G H J K

L

backfilling to excavation ; depositing in * layers ; compacting

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/3

To C olle ction

$

EXCAVATION FILLING AND DISPOSAL (Cont'd) A filling in making up levels ; depositing in * layers ; compacting by vibratory roller ( ACCD) filling for forming embankments or terraces ; depositing in * layers ; compacting by vibratory roller ( ACCD) filling to planters ; depositing ; compacting ( ACCD) filling in making up levels ; average * thick ; compacting by vibratory roller ( ACCD) Obtained from specified off site area E filling in making up levels ; depositing ; compacting

m3

B

m3

C

m3

D

m2

( ACCD)

m3

F

filling in making up levels ; average * thick ; depositing ; compacting ( ACCD) Disposal Surplus excavated material

m2

G

removing from site ; depositing to dumping area provided by Employer ( ACCD) depositing on site in permanent spoil heaps ; average *m from excavation ( ACCD) TREATMENT OF SURFACES Surface treatments Sides of cuttings

m3

H

m3

J

trimming and compacting to slope ( ACCD) Sides of embankments

m2

K

trimming and compacting to slope ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/4

To C olle ction

$

EXCAVATION TREATMENT OF SURFACES (Cont'd) Surfaces of rock A trimming to produce fair face ; within the tolerance specified in General Specification for Building clause 3.11 ; * ( ACCD) TEMPORARY SHORING AND SUPPORTS Allowing for temporary shoring and supports To vertical face of excavation into banks ; exceeding 1.50m high ; for construction of retaining wall and similar B minimum face height *m ; maximum face height *m ; approximate overall length *m ( ACCD) SPRAYED CONCRETE SURFACING Concrete surfacing mix * ; applied by spraying Generally C to slope ; * thick HARDCORE OR GRANULAR FILLING Hardcore Filling D in making up levels ; depositing and compacting in layers ( ACCD) in making up levels average * thick Surfaces of hardcore F blinding surface with fine graded material ( ACCD) Grade 200 recycled rockfill Filling G in making up levels ; depositing and compacting in layers ( ACCD) ( ACCD) m2

m2

-

item

-

m3

E

( ACCD)

m2

m2

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/5

To C olle ction

$

EXCAVATION HARDCORE OR GRANULAR FILLING (Cont'd) A in making up levels average * thick

( ACCD)

m2

Surfaces of grade 200 recycled rockfill B blinding surface with fine graded material ( ACCD) SUNDRIES Treatments to sheet piling Cutting or burning through steel sheet piling C unit * x * overall Treatments to diaphragm wall Cutting off top of diaphragm wall D * thick Pile head treatments Cutting off heads of piles ; bored piles ; straightening or bending and cleaning projecting reinforcement ; removing debris from site E * diameter ; not exceeding 1.00m length ( ACCD) Caisson head treatments Breaking up the lining above finished casting level of the concrete core ; associated excavation ; removing material from site F * minimum internal diameter Compaction tests Tests to determine G the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) m ( ACCD) m ( ACCD) m

m2

nr

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/6

To C olle ction

$

EXCAVATION SUNDRIES (Cont'd) A the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Record survey Oversite topographical survey B by an approved independent surveyor ; before any work carried out under the Contract ; including preparing record drawings ( ACCD)

nr

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/7

To C olle ction

$

EXCAVATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.4/1 MODBQ.4/2 MODBQ.4/3 MODBQ.4/4 MODBQ.4/5 MODBQ.4/6 MODBQ.4/7 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.4 - EXCAVATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.4/8

Bill Nr. MODBQ.5 UNDERPINNING UNDERPINNING Underpinning ; reinforced concrete walls ; to East elevation of Transformer Room ; * long ; *m deep below base of existing foundation ; maximum *m lengths in one operation Temporary supports A to work to be underpinned ( ACCD) item -

Excavating preliminary trenches from both sides ; commencing at natural ground level B C not exceeding 1.50m deep 1.50 - 3.00m deep ( ACCD) ( ACCD) m3 m3

Excavating trenches below level of base of existing foundation from one side only ; commencing at *m below natural ground level D E not exceeding 1.50m deep 1.50 - 3.00m deep ( ACCD) ( ACCD) m3 m3

Extra over excavation and disposal at any depth for breaking up and removing F G unreinforced concrete ( ACCD) m3

surface concrete * thick ; with hardcore under ( ACCD) Excavated material

m2

H

backfilling to excavation ; depositing in * layers ; compacting Surplus excavated material

( ACCD)

m3

J

removing from site

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.5/1

To C olle ction

$

UNDERPINNING UNDERPINNING (Cont'd) Concrete ; grade */* A blinding under foundations and beams ; * thick

( ACCD)

m3

Concrete ; no-fines ; grade */* ; placing by pumping B filling behind walls Reinforced concrete ; grade */* C D E foundations ground beams walls ; * thick ( ACCD) ( ACCD) ( ACCD) m3 m3 m3 ( ACCD) m3

Plain steel bars ; links, stirrups and binders ; PROVISIONAL F * diameter ( ACCD) kg

Deformed high yield steel bars ; general reinforcement ; PROVISIONAL G * diameter Sawn formwork ; vertical surfaces H foundations, pile caps, ground beams and the like walls ( ACCD) kg

( ACCD) ( ACCD)

m2 m2

J K

foundations, pile caps, ground beams and the like ; 100 - 200 wide ( ACCD) Sawn formwork left in ; vertical surfaces

m

L

foundations, pile caps, ground beams and the like walls

( ACCD) ( ACCD)

m2 m2

M N

foundations, pile caps, ground beams and the like ; 100 - 200 wide ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.5/2

To C olle ction

$

UNDERPINNING UNDERPINNING (Cont'd) Loadbearing bricks ; LD units ; cement mortar (1:3) A walls ; one brick walls ; * thick ( ACCD) walls ; one and a half brick walls ; * thick ( ACCD) walls ; reduced brickwork ; * thick

m2

B

m2

C

( ACCD)

m2

Cutting, toothing and bonding ends of D wall to existing one brick thick wall each alternate course ; extra material ; * thick loadbearing brickwork ( ACCD) Expanded metal reinforcement ; galvanised ; weighing not less than 1.6 kg/m2 ; in walls E * wide ( ACCD) m

m

Steel bonding rods ; bituminous coated ; cutting and pinning one end to concrete ; building one end into joint of brickwork F 6 diameter x 350 long ( ACCD) nr

Mastic asphalt to BS 6925 type T1097 ; damp-proofing and tanking G * thick three coat coverings ; on concrete ; vertical ( ACCD) * thick three coat coverings ; on concrete ; horizontal ( ACCD) * thick three coat coverings ; on concrete ; to soffits ( ACCD) cutting back ; jointing new to old asphalt ( ACCD) internal angle fillets ; in two coats ( ACCD) Cutting away projections of foundations M concrete foundations ; maximum width of * and * deep

m2

H

m2

J

m2

K

m

L

m

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.5/3

To C olle ction

$

UNDERPINNING C O L L E C T I O N Page No. Page No. Page No. MODBQ.5/1 MODBQ.5/2 MODBQ.5/3 ...................................... ...................................... ......................................

Bill Nr. MODBQ.5 - UNDERPINNING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.5/4

Bill Nr. MODBQ.6 CONCRETE WORKS IN-SITU CONCRETE Concrete ; grade 10/20 Blinding under foundations and beams A B 50 thick 75 thick Concrete ; grade */* Foundations C D generally generally ; PROVISIONAL Isolated stanchion or column bases E F Beds G H 250 thick 150 thick Copings J generally ( ACCD) m3 ( ACCD) ( ACCD) m3 m3 generally generally ; PROVISIONAL ( ACCD) ( ACCD) m3 m3 ( ACCD) ( ACCD) m3 m3 ( ACCD) ( ACCD) m3 m3

Concrete ; grade */* ; water repellant containing an approved water-reducing admixture Beds K * thick Planter walls L * thick ( ACCD) m3 ( ACCD) m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/1

To C olle ction

$

CONCRETE WORKS IN-SITU CONCRETE (Cont'd) Benching under fitments A * thick Reinforced concrete ; grade */* Foundations B generally Isolated stanchion or column bases C generally Pile caps D generally Ground beams E Beds F G H 200 thick 150 thick average 175 thick Machine bases J 150 thick Suspended slabs ; horizontal K L M 200 thick 150 thick average * thick ( ACCD) ( ACCD) ( ACCD) m3 m3 m3 ( ACCD) m3 ( ACCD) ( ACCD) ( ACCD) m3 m3 m3 generally ( ACCD) m3 m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3

Suspended slabs ; sloping not exceeding 15 degrees from horizontal N * thick ( ACCD) m3

Suspended slabs ; sloping exceeding 15 degrees from horizontal P * thick ( ACCD) m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/2

To C olle ction

$

CONCRETE WORKS IN-SITU CONCRETE (Cont'd) Filling and topping in suspended coffered slabs ; horizontal A generally ( ACCD) m3

Filling and topping in suspended troughed slabs ; horizontal B generally Walls C D E F 300 thick 250 thick 150 thick average * thick Retaining walls G H * thick average * thick Columns J generally Beams K generally Stairs L generally Casings to steel beams M generally Casings to steel stanchions N generally Curbs P generally Copings Q generally ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) ( ACCD) m3 m3 ( ACCD) ( ACCD) ( ACCD) ( ACCD) m3 m3 m3 m3 ( ACCD) m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/3

To C olle ction

$

CONCRETE WORKS IN-SITU CONCRETE (Cont'd) Projecting cills A generally Strings B generally Cornices C generally Thickenings to beds ; under walls, partitions and the like D * (average) wide x * thick ( ACCD) m ( ACCD) m3 ( ACCD) m3 ( ACCD) m3

Surface water channels in level ground ; half round E * wide x * (average) deep waterway ( ACCD) Reinforced concrete ; grade */* ; water repellant containing an approved water-reducing admixture Beds F * thick Suspended slabs ; horizontal G * thick Walls H * thick Columns J generally Beams K generally ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3 ( ACCD) m3

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/4

To C olle ction

$

CONCRETE WORKS IN-SITU CONCRETE (Cont'd) Reinforced lightweight concrete ; cement and 5 vermiculite aggregate (1:6 by volume) Benching under fitments A * thick ( ACCD) m3

Filling around Asiatic W.C. pan ; volume of pan not deducted B generally REINFORCEMENT Plain steel bars ; ALL PROVISIONAL General reinforcement C D E F G round bars ; 32 diameter round bars ; 25 diameter round bars ; 20 diameter round bars ; * diameter ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg ( ACCD) m3

round bars ; * diameter ; 12.00 15.00m long ( ACCD) Links, stirrups and binders

kg

H

round bars ; * diameter

( ACCD)

kg

Deformed high yield steel bars ; ALL PROVISIONAL General reinforcement J K L M N round bars ; 32 diameter round bars ; 25 diameter round bars ; 20 diameter round bars ; * diameter ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg

round bars ; * diameter ; 12.00 15.00m long ( ACCD)

kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/5

To C olle ction

$

CONCRETE WORKS REINFORCEMENT (Cont'd) Plain steel bars ; epoxy coated ; ALL PROVISIONAL General reinforcement A B C D E round bars ; 32 diameter round bars ; 25 diameter round bars ; 20 diameter round bars ; * diameter ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg

round bars ; * diameter ; 12.00 15.00m long ( ACCD) Links, stirrups and binders

kg

F

round bars ; * diameter

( ACCD)

kg

Deformed high yield steel bars ; epoxy coated ; ALL PROVISIONAL General reinforcement G H J K L round bars ; 32 diameter round bars ; 25 diameter round bars ; 20 diameter round bars ; * diameter ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg

round bars ; * diameter ; 12.00 15.00m long ( ACCD) Fabric reinforcement ; BS 4483 Square mesh ; ref. A193 ; weighing 3.02 kg/m2 ; 200 minimum side and end laps ; measured net - allow for laps

kg

M

in concrete Couplers * couplers

( ACCD)

m2

N P

for 32 diameter * bars for 40 diameter * bars

( ACCD) ( ACCD)

nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/6

To C olle ction

$

CONCRETE WORKS REINFORCEMENT (Cont'd) Threading ends of bars For couplers (measured separately) A 40 diameter deformed high yield steel bars ( ACCD) FORMWORK Sawn formwork Vertical surfaces B foundations, pile caps, ground beams and the like piers, columns and stanchions

kg

( ACCD) ( ACCD)

m2 m2

C D

piers, columns and stanchions ; curved ; * radius ( ACCD) walls walls ; curved edges and breaks in walls exceeding 300 wide edges and breaks in suspended slabs exceeding 300 wide edges and breaks in slabs exceeding 300 wide ( ACCD) ( ACCD)

m2 m2 m2

E F G

( ACCD)

m2

H

( ACCD)

m2

J

( ACCD)

m2

K

curbs or upstands exceeding 300 wide ( ACCD) Flat surfaces

m2

L M

soffits of suspended slabs

( ACCD)

m2

soffits of suspended slabs ; 200 300 thick ( ACCD) soffits of suspended slabs ; strutting 3.50 - 5.00m high

m2

N

( ACCD)

m2

P

soffits of suspended slabs ; 300 400 thick ; strutting 3.50 - 5.00m high ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/7

To C olle ction

$

CONCRETE WORKS FORMWORK (Cont'd) A soffits of suspended coffered slabs * overall thick ; measured flat overall ; * x * x * mould size ; * profile at * centres both ways ( ACCD) soffits of suspended troughed slabs * overall thick ; measured flat overall ; * x * x * mould size ; * profile at * centres both ways ( ACCD) sides and soffits of beams sides and soffits of beams ; exceeding 750 deep sides and soffits of beams ; strutting 3.50 - 5.00m high ( ACCD)

m2

B

m2 m2

C D

( ACCD)

m2

E

( ACCD)

m2

F

sides and soffits of beams ; exceeding 750 deep ; strutting 3.50 - 5.00m high ( ACCD) soffits of openings in walls exceeding 300 wide Sloping surfaces

m2

G

( ACCD)

m2

H J

soffits of suspended slabs soffits of suspended slabs ; strutting 3.50 - 5.00m high sides and soffits of beams sides and soffits of beams ; strutting 3.50 - 5.00m high soffits of staircases

( ACCD)

m2

( ACCD) ( ACCD)

m2 m2

K L

( ACCD) ( ACCD)

m2 m2

M N

soffits of staircases ; strutting 3.50 - 5.00m high ( ACCD) upper surfaces exceeding 15 degrees from horizontal Vertical surfaces ; 100 - 200 wide

m2

P

( ACCD)

m2

Q R

edges and breaks in walls edges and breaks in suspended slabs

( ACCD)

m

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/8

To C olle ction

$

CONCRETE WORKS FORMWORK (Cont'd) A B edges and breaks in slabs curbs or upstands Vertical surfaces ; 200 - 300 wide C D edges and breaks in walls edges and breaks in suspended slabs edges and breaks in slabs curbs or upstands undercut risers Vertical surfaces ; 300 - 400 wide H open strings ( ACCD) m ( ACCD) m ( ACCD) ( ACCD) m m

( ACCD) ( ACCD) ( ACCD) ( ACCD)

m m m m

E F G

Flat surfaces ; not exceeding 500 wide J edges and soffits of copings, cills, strings, cornices, eaves overhangs and the like * girth ( ACCD) Extra over formwork to walls K for formwork to projecting surfaces of copings, cills, strings, cornices, eaves overhangs and the like * girth ( ACCD) Fillets on formwork ; planted on to form grooves L * x * ; straight ( ACCD) m

m

m

Surfaces of cantilever ends or brackets and the like M * x * x * ( ACCD) nr

Formwork to produce fair faced finish ; lining with plywood Vertical surfaces N P piers, columns and stanchions walls ( ACCD) ( ACCD) m2 m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/9

To C olle ction

$

CONCRETE WORKS FORMWORK (Cont'd) Flat surfaces A B soffits of suspended slabs soffits of suspended slabs ; strutting 3.50 - 5.00m high sides and soffits of beams sides and soffits of beams ; strutting 3.50 - 5.00m high Sloping surfaces E F soffits of suspended slabs soffits of staircases Sawn formwork left in Vertical surfaces G H piers, columns and stanchions walls Flat surfaces J K soffits of suspended slabs sides and soffits of beams Sawn boxings to form the following Holes for pipes, cables and the like L 300 diameter ; through * thick concrete Openings M 0.025 - 0.10m2 ; through * thick concrete ( ACCD) 0.40 - 0.50m2 ; through * thick concrete ( ACCD) ( ACCD) ( ACCD) m2 m2 ( ACCD) ( ACCD) m2 m2 ( ACCD) ( ACCD) m2 m2 ( ACCD) m2

( ACCD) ( ACCD)

m2 m2

C D

( ACCD)

m2

( ACCD)

nr

nr

N

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/10

To C olle ction

$

CONCRETE WORKS

PRECAST CONCRETE Precast concrete ; grade 20/20 Copings ; bedding in cement mortar (1:3) A * x * ; weathered ; reinforcing with one 10 diameter plain steel bar ; fair faced finish * girth and pointing with a flush joint all round (In Nr. 0) ( ACCD) angle stones ; to copings ; * x * ( ACCD) Cills ; bedding in cement mortar (1:3) C * x * ; sunk weathered ; reinforcing with two 6 diameter plain steel bars ; fair faced finish * girth and pointing with a flush joint all round (In Nr. 0) ( ACCD) stoolings ; to cills ; * x * ( ACCD)

m

B

nr

m nr

D

Lintols ; bedding in cement mortar (1:3) E 100 x 150 ; reinforcing with one 12 diameter plain steel bar (In Nr. 0) ( ACCD) * x * ; reinforcing with one 16 diameter plain steel bar ; units exceeding 2.00m long (In Nr. 0) ( ACCD) Louvres ; bedding in cement mortar (1:3) G * x * ; twice splayed ; reinforcing with four 10 diameter plain steel bars ; fair faced finish * girth and pointing with a flush joint all round ; units exceeding 2.00m long (In Nr. 0) ( ACCD) Duct covers H * x * x * ; reinforcing with 10 diameter plain steel bars at 150 centres both ways ; two 6 diameter plain steel lifting lugs ; fair faced finish to top and edges ( ACCD)

m

F

m

m

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/11

To C olle ction

$

CONCRETE WORKS

IN-SITU PRESTRESSED CONCRETE ; POST-TENSIONED WORK TO BEAMS AND SLABS ; AS DRAWING NR. * Reinforced concrete ; grade */* Suspended slabs ; horizontal A * thick Beams B generally Plain steel bar reinforcement ; ALL PROVISIONAL Links, stirrups and binders C round bars ; * diameter ( ACCD) kg ( ACCD) m3 ( ACCD) m3

Deformed high yield bar reinforcement ; ALL PROVISIONAL General reinforcement D round bars ; * diameter ( ACCD) kg

Plain steel bar reinforcement ; epoxy coated ; ALL PROVISIONAL Links, stirrups and binders E round bars ; * diameter ( ACCD) kg

Deformed high yield bar reinforcement ; epoxy coated ; ALL PROVISIONAL General reinforcement F round bars ; * diameter Sawn formwork Flat surfaces G H soffits of suspended slabs sides and soffits of beams ( ACCD) ( ACCD) m2 m2 ( ACCD) kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/12

To C olle ction

$

CONCRETE WORKS IN-SITU PRESTRESSED CONCRETE ; POST-TENSIONED WORK TO BEAMS AND SLABS ; AS DRAWING NR. * (Cont'd) Ducts ; permanent sheathing of suitable diameter to enclose tendons ; in reinforced concrete beams and slabs ; pressure grouting after tensioning Curved ducts A for tendon formed of twelve strands, each 15.2 diameter ; in lengths * - *m (In Nr. 0) ( ACCD) SUPPLYING ONLY tendons comprising the following prestressing strands ; measured net lengths between outer faces of anchorages - allow for extra lengths for tensioning Seven wire strands B of 15.2 diameter ; UTS * KN ( ACCD) kg

m

FIXING ONLY the following tendons in straight or curved sheathing (measured separately) Tendons C formed of twelve strands, each 15.2 diameter ; * long between outer faces of anchorages ( ACCD) Tensioning the following tendons Tendons D formed of twelve strands, each 15.2 diameter ; jacking force of * KN ; applied from one end ( ACCD) Anchorages ; complete assemblies comprising anchor plates, guides, cones, wedges and the like ; fixing in position ; formwork to form recesses ; filling recesses with epoxy mortar after completion of stressing Live anchorages ; fixed to beams and slabs E for tendon formed of twelve strands, each 15.2 diameter

nr

nr

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/13

To C olle ction

$

CONCRETE WORKS IN-SITU PRESTRESSED CONCRETE ; POST-TENSIONED WORK TO BEAMS AND SLABS ; AS DRAWING NR. * (Cont'd) Dead anchorages ; fixed to beams and slabs A for tendon formed of twelve strands, each 15.2 diameter Testing Allow for submitting to the Architect a sample of each type of anchorage to be used together with two test pieces from each coil of strand B paying all fees and charges in connection with testing each of these items by an authority specified by the Architect ( ACCD) MOVEMENT JOINTS Joints in concrete Forming movement joints ; formwork ; temporary fillets ; * surface coatings and formation of rebates or other labour C between two wall faces ; 200 wide ; filling with inorganic joint fillers ; cutting joint filler ; * dowels at * centres ( ACCD) in beds ; * wide x * deep ; filling with inorganic joint fillers ; * wide ; cutting joint filler ; * dowels at * centres ( ACCD) Pointing to movement joints with two part polysulphide-based sealant ; both sides E * x * ; including backing rod Aluminium cover strips to structural movement joints ; * F * x * flats ; straight ( ACCD) m ( ACCD) m

( ACCD)

nr

-

item

-

m2

D

m

Waterstops ; PVC ; centre bulb section ; * G * wide ; casting into concrete ; temporary fixing to formwork ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/14

To C olle ction

$

CONCRETE WORKS MOVEMENT JOINTS (Cont'd) A * wide ; casting into concrete ; temporary fixing to formwork ; PROVISIONAL ( ACCD) prefabricated angles ; on * wide waterstop ; welded joints ( ACCD) prefabricated flat mitres ; on * wide waterstop ; welded joints ( ACCD) prefabricated tees ; on * wide waterstop ; welded joints

m

B

nr

C

nr

D

( ACCD)

nr

E

prefabricated flat tees ; on * wide waterstop ; welded joints ( ACCD) prefabricated flat intersections ; on * wide waterstop ; welded joints ( ACCD) Waterstops ; PVC ; externally placed section ; *

nr

F

nr

G

* wide ; casting into concrete ; temporary fixing to formwork ( ACCD) * wide ; casting into concrete ; temporary fixing to formwork ; PROVISIONAL ( ACCD) prefabricated angles ; on * wide waterstop ; welded joints ( ACCD) prefabricated flat mitres ; on * wide waterstop ; welded joints ( ACCD) prefabricated tees ; on * wide waterstop ; welded joints

m

H

m

J

nr

K

nr

L

( ACCD)

nr

M

prefabricated flat tees ; on * wide waterstop ; welded joints ( ACCD) prefabricated flat intersections ; on * wide waterstop ; welded joints ( ACCD)

nr

N

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/15

To C olle ction

$

CONCRETE WORKS

SUNDRIES Sundry items Accessories cast into in-situ concrete ; steel ; bonding ties A * diameter x * long rods ( ACCD) nr

Accessories cast into in-situ concrete ; plastic ; spout or weep pipes B 75 diameter x 100 long ( ACCD) nr

Accessories cast into in-situ concrete ; stainless steel ; step irons C * diameter x * girth rods ; four times bent ( ACCD) Bridge bearing pads for concrete bridges ; top and bottom plates, reinforcement, bolts, holding down bolts, bedding, wedging and grouting ; as drawing nr. * D * x * x * thick ; type * Surfaces of existing concrete E hacking to form key Surfaces of concrete F G finishing with a wood float ( ACCD) m2 ( ACCD) m2 ( ACCD) nr

nr

finishing with a steel trowel or power float ( ACCD) finishing with a stiff brush finishing with a board edge ( ACCD) ( ACCD)

m2 m2 m2

H J

Treating surfaces with an approved liquid hardener ; in accordance with the manufacturer's instructions K to concrete floors ( ACCD) m2

Treating surfaces with carborundum grains ; sprinkling on and lightly trowelling in before setting at the rate of 2 kg/m2 L to concrete floors ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/16

To C olle ction

$

CONCRETE WORKS SUNDRIES (Cont'd) Applying one coat of bituminous paint A on concrete surfaces ( ACCD) m2

Cement grouting under steel stanchion bases or grillages B * thick ( ACCD) m2

Forming channels in concrete beds ; half round ; formwork C * wide x * (average) deep ; curved ( ACCD) Testing Core tests to plain or reinforced concrete ; thicknesses and locations as directed by the Architect or his representative ; making good core hole with similar concrete and all works disturbed D * diameter x * deep ; PROVISIONAL ( ACCD) Watertightness test for water tanks E tank size ; approximately * x * x * deep internally ( ACCD)

m

nr

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/17

To C olle ction

$

CONCRETE WORKS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.6/1 MODBQ.6/2 MODBQ.6/3 MODBQ.6/4 MODBQ.6/5 MODBQ.6/6 MODBQ.6/7 MODBQ.6/8 MODBQ.6/9 MODBQ.6/10 MODBQ.6/11 MODBQ.6/12 MODBQ.6/13 MODBQ.6/14 MODBQ.6/15 MODBQ.6/16 MODBQ.6/17 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.6 - CONCRETE WORKS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.6/18

Bill Nr. MODBQ.7 BRICKWORK AND BLOCKWORK BRICKWORK Common bricks ; cement mortar (1:3) Vertical walls A B C half brick walls ; * thick one brick walls ; * thick one and a half brick walls ; * thick reduced brickwork ; * thick * thick Vertical walls ; circular on plan ; cutting and templates F half brick walls ; * thick Hollow walls G * thick inner skin ; * thick outer skin ; 50 thick cavity ; wall ties at 900 centres horizontally and 320 centres vertically staggered ( ACCD) Filling in openings H half brick walls ; * thick Isolated piers and chimney stacks J K one brick walls ; * thick one and a half brick walls ; * thick reduced brickwork ; * thick Dwarf walls M half brick walls ; * thick ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) ( ACCD) m2 m2

( ACCD) ( ACCD) ( ACCD)

m2 m2 m2

D E

m2

( ACCD) ( ACCD)

m2 m2

L

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/1

To C olle ction

$

BRICKWORK AND BLOCKWORK BRICKWORK (Cont'd) Common bricks ; cement/lime mortar (1:2:9) Vertical walls A B C half brick walls ; * thick one brick walls ; * thick reduced brickwork ; * thick Filling in openings D one brick walls ; * thick Isolated piers and chimney stacks E F one brick walls ; * thick one and a half brick walls ; * thick reduced brickwork ; * thick Dwarf walls H one brick walls ; * thick ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 m2

( ACCD) ( ACCD)

m2 m2

G

Concrete bricks ; cement mortar (1:3) Vertical walls J K half brick walls ; * thick one brick walls ; * thick Filling in openings L one brick walls ; * thick Isolated piers and chimney stacks M N one brick walls ; * thick one and a half brick walls ; * thick reduced brickwork ; * thick Dwarf walls Q one brick walls ; * thick ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) ( ACCD) m2 m2

( ACCD) ( ACCD)

m2 m2

P

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/2

To C olle ction

$

BRICKWORK AND BLOCKWORK BRICKWORK (Cont'd) Extra over brickwork for A bedding and pointing in sealant compound ( ACCD) BLOCKWORK Hollow concrete blocks 250 long x 125 high ; cement mortar (1:3) Walls or partitions B C 100 thick 150 thick ( ACCD) ( ACCD) m2 m2

m2

Walls or partitions ; finished smooth and pointing with a flush joint one side D * thick ( ACCD) m2

Walls or partitions ; finished smooth and pointing with a flush joint both sides E * thick ( ACCD) m2

Cutting, toothing and bonding end of wall to brick wall each alternate course ; extra material F * thick ( ACCD) m

Solid concrete blocks 250 long x 125 high ; cement mortar (1:3) Walls or partitions G H 100 thick 150 thick ( ACCD) ( ACCD) m2 m2

Walls or partitions ; finished smooth and pointing with a flush joint one side J * thick ( ACCD) m2

Walls or partitions ; finished smooth and pointing with a flush joint both sides K * thick ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/3

To C olle ction

$

BRICKWORK AND BLOCKWORK BLOCKWORK (Cont'd) Cutting, toothing and bonding end of wall to brick wall each alternate course ; extra material A * thick Extra over blockwork for B bedding and pointing in sealant compound ( ACCD) BRICK FACEWORK Extra over common bricks in any mortar for Fair face ; pointing C walls and the like * facing bricks ; pointing D walls and the like ( ACCD) m2 ( ACCD) m2 ( ACCD) m

m2

Extra over concrete bricks in any mortar for Fair face ; pointing E walls and the like GLASS BLOCKS Hollow glass blocks ; transparent ; bedding in cement/lime mortar (1:2:9) ; pointing both sides Type * ; * x * x * F walls or panels Forming movement joints G * wide inorganic joint filler ; sealing with * both sides ( ACCD) Expanded metal reinforcement ; galvanised ; weighing not less than 1.6 kg/m2 ; in hollow glass block walls or panels H * wide ( ACCD) m ( ACCD) m2 ( ACCD) m2

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/4

To C olle ction

$

BRICKWORK AND BLOCKWORK

DAMP PROOF COURSES Two layers of fibre based bitumen to BS 6398 Class B ; levelling mortar bed ; measured net - allow for laps Horizontal A B C over 225 wide 100 wide 215 wide SUNDRIES Sundry items Closing cavities of hollow walls D at ends with 100 blockwork set on edge ( ACCD) Expanded metal reinforcement ; galvanised ; weighing not less than 1.6 kg/m2 ; in walls E * wide ( ACCD) m ( ACCD) ( ACCD) ( ACCD) m2 m m

m

Steel bonding rods ; bituminous coated ; cutting and pinning one end to concrete ; building one end into joint of brickwork F 6 diameter x 350 long ( ACCD) nr

Steel bonding ties ; galvanised ; fanged at both ends ; cutting and pinning one end to concrete ; building one end into joint of brickwork G 3 x 20 x 150 long BRICK PAVINGS AND STEPS OR BLOCK Common bricks ; bedding, jointing and pointing in cement mortar (1:3) Pavings ; bricks laid on face ; herringbone pattern H * thick ( ACCD) m2 ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/5

To C olle ction

$

BRICKWORK AND BLOCKWORK BRICK PAVINGS AND STEPS OR BLOCK (Cont'd) Steps ; bricks laid on face A * wide x * high ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/6

To C olle ction

$

BRICKWORK AND BLOCKWORK C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.7/1 MODBQ.7/2 MODBQ.7/3 MODBQ.7/4 MODBQ.7/5 MODBQ.7/6 ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.7 - BRICKWORK AND BLOCKWORK To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.7/7

Bill Nr. MODBQ.8 DRAINAGE SOIL AND SURFACE WATER DRAINAGE Excavating trenches for drain pipes ; commencing at natural ground level Not exceeding 200 internal diameter ; not exceeding 1.50m total depth A B 0.75m average depth 1.00m average depth ( ACCD) ( ACCD) m m

Not exceeding 200 internal diameter ; 1.50 - 3.00m total depth C *m average depth ( ACCD) m

* internal diameter ; not exceeding 1.50m total depth D *m average depth ( ACCD) m

* internal diameter ; 1.50 - 3.00m total depth E *m average depth ( ACCD) m

Extra over excavation and disposal at any depth for Breaking up and removing materials met with in excavation F surface concrete * thick ; with hardcore under ( ACCD) slab foundations ( ACCD)

m2 m3

G

Granular bedding ; recycled material Beds H * x * under * diameter pipes Beds and backfilling J * x * to * diameter pipes ( ACCD) m ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/1

To C olle ction

$

DRAINAGE SOIL AND SURFACE WATER DRAINAGE (Cont'd) Granular bedding ; non-recycled material Beds A * x * under * diameter pipes Beds and backfilling B * x * to * diameter pipes Concrete ; grade 10/20 Beds ; formwork C * x * under * diameter pipes Beds and haunchings ; formwork D * x * under * diameter pipes Beds and surrounds ; formwork E * x * under * diameter pipes ; surrounds minimum * thick ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m

( ACCD)

m

Surrounds to vertical pipes ; formwork F * x * to * diameter pipes Reinforcement ; plain steel bars General reinforcement G 10 diameter ( ACCD) kg ( ACCD) m

Concrete pipes and fittings ; class * ; reinforced ; spigot and socket joints Pipes ; vertical H * internal diameter Extra over pipes for J K * bends ( ACCD) nr ( ACCD) m

* x * x * single branch junctions ( ACCD) * flexible joints ( ACCD)

nr nr

L

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/2

To C olle ction

$

DRAINAGE SOIL AND SURFACE WATER DRAINAGE (Cont'd) Vitrified clay pipes and fittings ; flexible sleeve joints Pipes ; on bed ; in trench A * internal diameter Extra over pipes for B C * bends ( ACCD) nr ( ACCD) m

* x * x * single branch junctions ( ACCD) Cast iron pipes and fittings ; spigot and socket joints Pipes ; on bed ; in trench

nr

D

* internal diameter Extra over pipes for

( ACCD)

m

E F

* bends

( ACCD)

nr

* x * x * single branch junctions ( ACCD) * flexible joints ( ACCD)

nr nr

G

Cast iron pipes and fittings ; flanged and bolted joints Pipes ; vertical H * internal diameter Pipes ; suspended J * internal diameter Extra over pipes for K L M * bends ( ACCD) nr nr ( ACCD) m ( ACCD) m

* bends with bolted access door ( ACCD) * x * x * single branch junctions ( ACCD) * blank caps * socket plugs ( ACCD) ( ACCD)

nr nr nr

N P

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/3

To C olle ction

$

DRAINAGE SOIL AND SURFACE WATER DRAINAGE (Cont'd) A * flexible joints ( ACCD) nr

Perforated plastic pipes and fittings ; open joints Pipes ; on bed ; in trench B * internal diameter Extra over pipes for C D * bends ( ACCD) nr ( ACCD) m

* x * x * single branch junctions ( ACCD) Cast iron traps, gullies, gratings and the like Gullies ; bedding and surrounding with concrete grade 20/20 150 thick ; formwork ; excavation and disposal ; jointing to pipes

nr

E

* trapped outlet ; * x * rebated tops ; * x * cast iron hinged gratings and frames ( ACCD) * trapped outlet ; * diameter rebated tops ; * diameter cast iron hinged gratings and frames ( ACCD) Grease interceptors ; bedding and surrounding with concrete grade 20/20 150 thick ; formwork ; excavation and disposal ; jointing to pipes

nr

F

nr

G

* outlet ; * x * rebated tops ; * x * cast iron hinged gratings and frames ; removable galvanised steel strainers with handles ( ACCD) Raising surrounds ; 100 concrete grade 20/20 sides to gullies in forming hoppers ; 150 reinforced concrete grade 20/20 cover slab ; four 12 diameter plain steel bars ; openings for gratings (gratings measured separately) ; dishing to outlets and inlets ; excavation ; disposal and formwork

nr

H

hoppers * x * x * deep internally ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/4

To C olle ction

$

DRAINAGE SOIL AND SURFACE WATER DRAINAGE (Cont'd) Fresh air inlets ; brass front ; mica flap ; jointing to pipes A 100 x 150 ( ACCD) nr

Road gulley gratings and frames ; bedding and haunching frames in cement mortar B * x * ; weighing approximately * kg ( ACCD) Flexible waterproof membrane Plastic sheeting C laying under drain bedding Surface channels, road margins Concrete ; grade 20/20 ; road margins ; rectangular ; * wide x * thick D * wide x * extreme deep splayed waterway ( ACCD) Concrete ; grade 20/20 ; channels ; half round ; * thick sides ; * thick bottoms ; excavation, disposal and formwork ; movement joints at * maximum centres ; rendering surfaces with 12 thick cement and sand (1:3) trowelled smooth E * wide x * (average) deep waterway ( ACCD) * wide x * (average) deep waterway ; 350 girth x 80 thick apron one side ( ACCD) * wide x * (average) deep waterway ; stepping to faces of embankments ; * x * x * anchor blocks under at * maximum centres ( ACCD) extra over waterways for forming sump below channel invert ; * x * x * deep internally ; * sides ; * bottom ; cast iron grating ( ACCD) ( ACCD) m2

nr

m

m

F

m

G

m

H

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/5

To C olle ction

$

DRAINAGE SOIL AND SURFACE WATER DRAINAGE (Cont'd) Precast concrete ; grade 20/20 ; channel covers ; in 600 lengths ; 6 diameter plain steel bars, * nr. longitudinal and * nr. transverse ; notching 25 x 150 at each end ; fair faced finish to top and edges A * thick x * wide Cast iron channel gratings ; in 600 lengths ; * x * slots at * centres B * thick x * wide Piers, thrust blocks and the like Concrete ; grade 10/20 ; formwork ; blinding under beds ; excavation and disposal C piers ; * x * x * high ; top surfaces sloping * degrees from horizontal ( ACCD) Applying two coats of black bitumastic paint ; on coated cast iron Pipes D E F not exceeding 50 diameter 50 - 100 diameter * diameter ( ACCD) ( ACCD) ( ACCD) m m m ( ACCD) m ( ACCD) m

nr

MANHOLES, INSPECTION CHAMBERS AND THE LIKE Manholes ; * nr. Excavating pits ; commencing at reduced level G H J not exceeding 1.50m deep 1.50 - 3.00m deep 3.00 - 4.50m deep Excavated material K backfilling ; depositing ; compacting ( ACCD) ( ACCD) ( ACCD) m3 m3 m3

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/6

To C olle ction

$

DRAINAGE MANHOLES, INSPECTION CHAMBERS AND THE LIKE (Cont'd) Surplus excavated material A removing from site Concrete ; grade 20/20 B C D E beds ; horizontal ; * thick walls ; * thick walls ; * average thick ( ACCD) ( ACCD) ( ACCD) m3 m3 m3 ( ACCD) m3

benching ; formwork ; forming half-round main channels and three-quarter branch channels ; finishing to steep falls from sides ; rendering surfaces with 15 cement and sand (1:3) trowelled smooth ; average * thick ( ACCD) Reinforced concrete ; grade 20/20

m2

F

suspended slabs ; horizontal ; * thick ( ACCD) Reinforcement ; plain steel bars

m3

G

general reinforcement ; round bars ; * diameter ( ACCD) Sawn formwork ; vertical surfaces

kg

H

walls Sawn formwork ; flat surfaces

( ACCD)

m2

J

soffits of suspended slabs Sawn formwork ; sloping surfaces

( ACCD)

m2

K

walls Sawn boxings to form openings

( ACCD)

m2

L

* - *m2 ; through * thick concrete ( ACCD) Hot-rolled steel to BS EN 10025 ; grade S275 ; bolted fabrication

nr

M

127 x 76 x 13.36 kg joists

( ACCD)

kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/7

To C olle ction

$

DRAINAGE MANHOLES, INSPECTION CHAMBERS AND THE LIKE (Cont'd) A connections ; * x * x * frames ; in cleats ( ACCD) Collecting from Government Logistics Department and FIXING ONLY manhole covers and frames ; bedding and haunching frame in cement mortar ; sealing cover in grease B * x * clear opening ; weighing approximately * kg

kg

( ACCD)

nr

Cast iron pipes and fittings ; lead run joints C * internal diameter ; fixed to walls and columns extra over pipes for ; * shoes

( ACCD) ( ACCD)

m nr

D E

extra over pipes for ; * x * x * swept branch junctions ( ACCD) extra over pipes for ; * blank caps

nr

F

( ACCD)

nr

Cast iron manhole covers and frames to BS EN 1561 Grade EN-GJL-150 ; class A15 ref. * ; recessed ; bedding and haunching frame in cement mortar G * x * clear opening ; weighing approximately * kg Step irons ; malleable iron H general purpose pattern ; casting into concrete ( ACCD) Fresh air inlets ; brass front J 100 x 150 Copper wire balloon gratings K to suit * internal diameter pipes ( ACCD) Spatterdash L all internal surfaces of concrete ( ACCD) ( ACCD) nr

( ACCD)

nr

nr

nr

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/8

To C olle ction

$

DRAINAGE MANHOLES, INSPECTION CHAMBERS AND THE LIKE (Cont'd) Cement and sand (1:3) rendering ; internal surfaces ; trowelled finish A B walls ; * thick ; two coats soffits ; * thick ; one coat ( ACCD) ( ACCD) m2 m2

Applying two coats of black bitumastic paint ; on cast iron C D pipes ; 50 - 100 diameter pipes ; * diameter Catchpits ; * nr. Excavating pits ; commencing at reduced level E F not exceeding 1.50m deep 1.50 - 3.00m deep Excavated material G backfilling ; depositing ; compacting Surplus excavated material H removing from site Concrete ; grade 20/20 J K beds ; horizontal ; * thick walls ; * thick Sawn formwork ; vertical surfaces L walls ( ACCD) m2 ( ACCD) ( ACCD) m3 m3 ( ACCD) m3 ( ACCD) ( ACCD) m3 m3 ( ACCD) ( ACCD) m m

( ACCD)

m3

Precast concrete ; grade 20/20 ; cover slabs M * x * x * thick ; reinforcing with * diameter plain steel bars at * centres both ways ; two * diameter x * long steel lifting lugs ; fair faced finish to top and edges ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/9

To C olle ction

$

DRAINAGE MANHOLES, INSPECTION CHAMBERS AND THE LIKE (Cont'd) Step irons ; malleable iron A general purpose pattern ; casting into concrete ( ACCD) Inspection chambers Concrete grade * ; * thick bases ; * thick walls and * thick cover slabs ; coated cast iron * duty standard triangular access covers and frames for * x * clear opening ; bedding and haunching frames in cement mortar ; sealing cover in grease and fine sand B * x * x * deep internal size SUNDRIES Connections Connection to Government sewers ; flexible joints C * pipes ; * diameter ( ACCD) nr ( ACCD) nr

nr

Work to existing manholes and the like Joints of pipes to existing walls ; temporary diversion of or plugging up drains, as required ; forming holes trimmed with steel reinforcement ; building in end of new drain pipes, cutting concrete benching for new main or branch channels, making good concrete walls, cement and sand rendering and all other works disturbed to match existing ; removing debris D connection of * diameter pipes through * thick walls

( ACCD)

nr

Alterations to concrete channels and benchings ; temporary diversion of or plugging up drains, as required ; cutting concrete benchings for forming main or branch channels ; cement and sand rendering and all other works disturbed to match existing ; removing debris E * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/10

To C olle ction

$

DRAINAGE SUNDRIES (Cont'd) Testing Testing the whole of the works in accordance with the General Specification for Plumbing and Drainage Installation ; remedying any defects ; re-testing as necessary ; leaving in sound order A soil and surface water drainage systems including granular bedding material ( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/11

To C olle ction

$

DRAINAGE C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.8/1 MODBQ.8/2 MODBQ.8/3 MODBQ.8/4 MODBQ.8/5 MODBQ.8/6 MODBQ.8/7 MODBQ.8/8 MODBQ.8/9 MODBQ.8/10 MODBQ.8/11 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr.MODBQ.8 - DRAINAGE To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.8/12

Bill Nr. MODBQ.9 WATERPROOFING ASPHALT Mastic asphalt ; to BS 6925 type T1097 ; tanking and damp-proofing One coat coverings ; on brickwork or blockwork A * thick ; horizontal Two coat coverings ; expanded metal lathing reinforcement ; on concrete B * thick ; sloping Two coat coverings ; felt isolating membrane ; expanded metal lathing reinforcement ; on concrete C * thick ; vertical ; executing overhand Three coat coverings ; on concrete D E * thick ; horizontal dressing to outlet pipes ( ACCD) ( ACCD) m2 nr ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

Three coat coverings ; felt isolating membrane ; on concrete F G * thick ; horizontal dishing to gullies Internal angle fillets H in two coats ( ACCD) m ( ACCD) ( ACCD) m2 nr

Cutting back existing and jointing new J * thick ( ACCD) m

Three coat linings to sumps ; on concrete K * thick ; * x * x * deep ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/1

To C olle ction

$

WATERPROOFING ASPHALT (Cont'd) Mastic asphalt ; to BS 6925 type R988 ; manufactured with asphaltic cement specified under Table 1 column B (100 % Bitumen) ; roof coverings Two coat coverings ; felt isolating membrane ; on screeds A B C * thick ; horizontal dressing to outlet pipes dishing to gullies Two coat coverings ; expanded metal lathing reinforcement ; on screeds D * thick ; sloping Two coat coverings ; felt isolating membrane ; expanded metal lathing reinforcement ; on screeds E * thick ; sloping Two coat skirtings ; on concrete F * thick ; not exceeding 300 girth ; angle fillet at bottom ; turn in at top ; curved ( ACCD) Two coat linings to gutters ; on concrete G * thick ; * girth ; angle fillet at bottom ; arris at top ( ACCD) outlets to gutters ( ACCD) ( ACCD) m2 ( ACCD) m2 ( ACCD) ( ACCD) ( ACCD) m2 nr nr

m

m nr

H

Two coat coverings to curbs ; on concrete J * thick ; * girth ; angle fillet at bottom ; turn in at top ( ACCD) Solar protection K white stone chippings in size * at a rate of * ; bedding in bitumen compound ; application rate at * ( ACCD) reflective paint ; two coats application

m

m2

L

( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/2

To C olle ction

$

WATERPROOFING ASPHALT (Cont'd) Testing Non-destructive test of waterproofing system ; preparing ; executed by an independent specialist contractor A infrared thermography scanning LIQUID MEMBRANE WATERPROOFING Liquid applied waterproofing material Type BI ; designing by, obtaining from and fixing by a specialist contractor ; laying in accordance with the manufacturer's instructions ; tanking and damp-proofing * coats ; on concrete B C D E * thick ; horizontal * thick ; sloping * thick ; vertical dressing to outlet pipes * coats ; on * F G H J K * thick ; horizontal * thick ; sloping * thick ; vertical dressing to gullies ( ACCD) ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 m2 nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 nr ( ACCD) item -

* coat collar * high around pipes, railing standards and the like ; expanded metal lathing reinforcement ( ACCD) * coat skirtings ; on concrete

nr

L

* thick ; not exceeding 300 girth ; sloping ( ACCD) * coat linings to gutters ; on screeds

m

M

* thick ; * girth ; curved ; executing in sections

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/3

To C olle ction

$

WATERPROOFING LIQUID MEMBRANE WATERPROOFING (Cont'd) * coat coverings to curbs ; on screeds A * thick ; * girth ( ACCD) m

Liquid applied waterproofing material Type BII ; designing by, obtaining from and fixing by a specialist contractor ; laying in accordance with the manufacturer's instructions ; roof coverings * coat ; on concrete B C D * thick ; horizontal * thick ; sloping * thick ; vertical * coats ; on * E F G H * thick ; horizontal * thick ; sloping * thick ; vertical dressing to outlet pipes * coat skirtings ; on concrete J * thick ; not exceeding 300 girth ; raking ( ACCD) * coat linings to gutters ; on screeds K * thick ; * girth ; horizontal ; executing in sections ( ACCD) outlets to gutters ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 nr ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

m

m nr

L

* coat coverings to curbs ; on concrete M * thick ; * girth Testing Non-destructive test of waterproofing system ; preparing ; executed by an independent specialist contractor N infrared thermography scanning ( ACCD) item ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/4

To C olle ction

$

WATERPROOFING LIQUID MEMBRANE WATERPROOFING (Cont'd) Bituminous emulsion roofing ; wash coat, priming coat and one coat of approved bitumen emulsion at 0.7 litre/m2 per coat ; glass fibre membrane ; two coats of approved bitumen emulsion at 0.5 litre/m2 per coat ; finishing surfaces with sand dressing Roof coverings ; on screeds A B C D horizontal vertical on soffits dressing to outlet pipes Fascias ; on concrete E not exceeding 300 girth ; sloping ( ACCD) Skirtings ; on concrete F not exceeding 300 girth ; raking ( ACCD) Linings to gutters ; on concrete G * girth ; horizontal ; executing in sections ( ACCD) outlets to gutters Dishings to channels ; on concrete J * girth ; curved ; executing in sections ( ACCD) outlets to channels Coverings to curbs ; on concrete L * girth ; curved Linings to sumps ; on concrete M * x * x * deep ( ACCD) nr ( ACCD) m ( ACCD) ( ACCD) m ( ACCD) ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 nr

m

m nr

H

m nr

K

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/5

To C olle ction

$

WATERPROOFING LIQUID MEMBRANE WATERPROOFING (Cont'd) Bituminous emulsion roofing ; wash coat, priming coat ; filling cracks with compound consisting of approved bitumen emulsion and sand (1:3 by volume) ; one coat of approved cover coating at the rate of 0.2 litre/m2 ; two coats of approved bitumen emulsion at the rate of 0.7 litres/m2 per coat ; finishing surfaces with sand dressing On felt ; existing A B C D horizontal sloping on soffits ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

vertical ; executing overhand in confined situations ( ACCD) Testing Non-destructive test of roofing system ; preparing ; executed by an independent specialist contractor

m2

E

infrared thermography scanning SHEET MEMBRANE WATERPROOFING

( ACCD)

-

item

-

Proprietary sheet waterproofing material Type AI ; designing by, obtaining from and fixing by a specialist contractor ; laying in accordance with the manufacturer's instructions ; flexible sheet tanking and damp-proofing * coat sheet coverings ; on concrete F G horizontal sloping * thick ; on concrete H J K horizontal sloping ( ACCD) ( ACCD) m2 m2 ( ACCD) ( ACCD) m2 m2

cutting back and jointing new to existing ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/6

To C olle ction

$

WATERPROOFING SHEET MEMBRANE WATERPROOFING (Cont'd) Aprons and turn-downs ; at eaves ; on screeds A * average exposed face height ; vertical ( ACCD) Skirtings and turn-ups ; at abutments ; on screeds B * average exposed face height ; vertical ( ACCD) Linings to gutters ; on concrete C * average exposed face ; curved ( ACCD) Dishings to channels ; on concrete D * average exposed face Coverings to curbs ; on concrete E * average exposed face ; curved ( ACCD) Linings to cesspools ; on concrete F * x * x * deep ( ACCD) nr m ( ACCD) m m

m

m

Cutting, fitting and dressing ; forming collars around G H to outlet pipes ( ACCD) nr

around pipes or railing standards and the like ( ACCD) Solar protection

nr

J

reflective paint ; * coat application BITUMEN FELT BUILT-UP ROOFING

( ACCD)

m2

Three layers felt roofing ; first two layers of felt ; top layer of approved mineral surfaced felt, including bonding compound in accordance with manufacturer's recommendations Roof coverings ; on screeds K horizontal ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/7

To C olle ction

$

WATERPROOFING BITUMEN FELT BUILT-UP ROOFING (Cont'd) A B vertical ( ACCD) m2

cutting back and jointing new to existing ; preparing surfaces to receive new ( ACCD) Aprons and turn-downs ; at eaves ; on screeds

m

C

* average exposed face height ; vertical ( ACCD) Skirtings and turn-ups ; at abutments ; on screeds

m

D

* average exposed face height ; vertical ( ACCD) Linings to gutters ; on concrete

m

E

* average exposed face ; curved ( ACCD) Dishings to channels ; on concrete

m

F

* average exposed face Coverings to curbs ; on concrete

( ACCD)

m

G

* average exposed face ; curved ( ACCD) Linings to sumps ; on concrete

m

H

* x * x * deep

( ACCD)

nr

Cutting, fitting and dressing ; forming collars around J to outlet pipes Solar protection K granite chippings in size * at a rate of * ; bedding in bitumen compound ; application rate * ( ACCD) Aluminium edge trim ; fixing with screws L * x * x * ; on concrete ( ACCD) m ( ACCD) nr

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/8

To C olle ction

$

WATERPROOFING BITUMEN FELT BUILT-UP ROOFING (Cont'd) Testing Non-destructive test of waterproofing system ; preparing ; executed by an independent specialist contractor A infrared thermography scanning ( ACCD) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/9

To C olle ction

$

WATERPROOFING C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.9/1 MODBQ.9/2 MODBQ.9/3 MODBQ.9/4 MODBQ.9/5 MODBQ.9/6 MODBQ.9/7 MODBQ.9/8 MODBQ.9/9 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.9 - WATERPROOFING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.9/10

Bill Nr. MODBQ.10 STONE WORKS STONE CONSTRUCTION * granite ; random rubble work ; brought upto courses * maximum high ; cement mortar joints ; roughly squared surface finish ; flush pointing Walling A B C * thick ; faced one side * thick ; faced both sides ( ACCD) ( ACCD) m2 m2

* thick ; faced both sides ; curved ; all cutting ; templates ( ACCD) Walling built against concrete or brickwork ; projecting bonding stones ; flushing up solid at back with mortar

m2

D

* thick ; faced one side Extra over walling for

( ACCD)

m2

E

attached columns ; * wide x * projection attached piers ; *

( ACCD) ( ACCD)

m m

F

* granite ; squared uncoursed rubble work ; courses varying from 150 to 250 high ; dry joints ; * surface finish ; flush pointing In beds and sides of watercourses ; * minimum thickness of stones ; on and including * thick gravel bed G sloping works at * degrees from horizontal ( ACCD) Cutting, toothing and bonding new walls to existing * thick * wall each alternative course ; extra material H * thick ( ACCD) m

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/1

To C olle ction

$

STONE WORKS STONE CONSTRUCTION (Cont'd) Preparing existing * wall for raising A * thick ( ACCD) m

* granite ; squared rubble work ; cement mortar joints ; finely squared dressed surface finish ; flush pointing Plinth cappings ; fixing with stainless steel dowels ; * x * ; * long ; at * centres B * x * ; sunk ( ACCD) m

Mullions ; fixing with bronze dowels ; * x * ; * girth ; at * centres C * x * ; splayed ( ACCD) m

Curbs, fenders and the like ; fixing with * ; * x * ; * long ; at * centres D * x * Steps E F straight ; * x * (In Nr. O) ( ACCD) m ( ACCD) m

extra over straight steps for fair ends ( ACCD) Bollards

nr

G

* diameter x * ; * ; moulded

( ACCD)

nr

Arches ; semi circular in * course ; * course width ; templates and centering ; as drawing nr. * H * x * overall ; to * thick stone wall ; bonding to walls with * ( ACCD) Moon gates ; * course width ; templates and centering ; as drawing nr. * J * x * x * overall ; to * thick stone wall ; bonding to walls with * ( ACCD)

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/2

To C olle ction

$

STONE WORKS STONE CONSTRUCTION (Cont'd) Weep holes and weep pipes Plastic weep pipes A * diameter x * long ; through * thick walls ( ACCD) STONE FACINGS TO STRUCTURAL BACKGROUNDS ; INTERNALLY Marble ; * origin ; * thick ; * colour ; polished finish ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in coloured cement Floors B level, to falls, to falls and crossfalls and to slopes not exceeding 15 degrees from horizontal ; on * bedding

nr

( ACCD)

m2

All surfaces of fitments and the like C generally Treads D * wide ; * edges ; on * bedding ( ACCD) Risers E * high ; undercut ; on * bedding ( ACCD) Strings F * girth on face ; * high ; on * bedding ( ACCD) Skirtings G * high ; following profile of treads and risers ; on * bedding ( ACCD) Kerbs H * wide x * high ; raking ; on * bedding ( ACCD) m m ( ACCD) m2

m

m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/3

To C olle ction

$

STONE WORKS STONE FACINGS TO STRUCTURAL BACKGROUNDS ; INTERNALLY (Cont'd) Linings to channels A * wide x * (average) deep ; to falls ; on * bedding Counter tops B * wide ; as drawing nr. * ; on * bedding ( ACCD) Fascias ; to counters C * x * high ; as drawing nr. * ; on * bedding ( ACCD) Marble ; * origin ; * thick ; * colour ; polished finish ; fixing to counter top framing with * ; pointing in coloured cement Bathroom and toilet vanitory slabs D * x * x * high overall ; in piece ; * profiled edges ; upstands ; * wide aprons ; openings for one basin and one * high cutting tap ( ACCD)

( ACCD)

m

m

m

nr

Granite ; * origin ; * x * x * ; * colour ; flamed finish ; fixing with plaster dabs, copper cramps and copper hooks ; pointing in coloured cement Walls and columns E generally ( ACCD) m2

Ceilings including sides and soffits of beams F G generally generally ; 3.50 - 5.00m above floor level Soffits of staircases H J generally generally ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/4

To C olle ction

$

STONE WORKS STONE FACINGS TO STRUCTURAL BACKGROUNDS ; INTERNALLY (Cont'd) Decorative bands in walls A * wide ; as drawing nr. * Projecting bands in walls B * wide x * projection ; as drawing nr. * ( ACCD) Corner pieces C * x * Engraved English letters D * x * overall ; as drawing nr. * ( ACCD) Raised numerals E * high ; as drawing nr. * Accessories Movement joints ; filling with compressible joint filling material ; pointing with * x * mastic sealant F G * wide x * deep ; horizontal * wide x * deep ; vertical ( ACCD) ( ACCD) m m ( ACCD) nr nr ( ACCD) nr ( ACCD) m

m

Brass dividing strips ; bedding in screed H 3 x 50 ( ACCD) m

STONE FACINGS TO STRUCTURAL BACKGROUNDS ; EXTERNALLY Granite ; * origin ; * thick ; * colour ; polished finish ; fixing with * x * copper wall ties * girth ; pointing in coloured cement Walls and columns J generally ( ACCD) m2

Ceilings including sides and soffits of beams K generally ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/5

To C olle ction

$

STONE WORKS STONE FACINGS TO STRUCTURAL BACKGROUNDS ; EXTERNALLY (Cont'd) A generally ; 3.50 - 5.00m above floor level Cills, copings, horizontal louvres, horizontal sunbreakers and the like B generally ( ACCD) m2

( ACCD)

m2

Vertical fins, vertical sunbreakers and the like C generally Recessed bands in walls D * wide x * deep ; as drawing nr. * ( ACCD) Decorative panels in walls E * x * overall ; as drawing nr. * ( ACCD) Accessories Polythene vapour barrier ; lapped at joints, measured net - allow for laps F * thick ; laid under screed ; vertical nr ( ACCD) m2

m

( ACCD)

m2

Movement joints ; filling with hot bitumen ; pointing with * x * proprietary colour epoxy sealant G H * wide x * deep ; horizontal * wide x * deep ; vertical Stainless steel cover strips ; * J * x * ( ACCD) m ( ACCD) ( ACCD) m m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/6

To C olle ction

$

STONE WORKS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.10/1 MODBQ.10/2 MODBQ.10/3 MODBQ.10/4 MODBQ.10/5 MODBQ.10/6 ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.10 - STONE WORKS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.10/7

Bill Nr. MODBQ.11 ROOF TILING CHINESE ROOF TILING Clay tiles ; 225 x 225 plain tiles ; 165 long tapered roll tiles ; single course, single layer ; 50 laps ; bedding and pointing in cement/lime mortar Horizontal work A on concrete Sloping work B C on concrete on timber Vertical work D on timber Curved work E on concrete Extra over tiling for F G H J K eaves courses ridges hips valleys verges PROPRIETARY ROOF TILING * tiles ; * x * tiles ; * degree pitch ; * laps ; bedding and pointing in * Horizontal work L on concrete ( ACCD) m2 ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) m m m m m ( ACCD) m2 ( ACCD) m2 ( ACCD) ( ACCD) m2 m2 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.11/1

To C olle ction

$

ROOF TILING PROPRIETARY ROOF TILING (Cont'd) Sloping work A on concrete Abutments B special tiles ; ref. * Eaves C special tiles ; ref. * Verges D special tiles ; ref. * Ridges E Hips F special tiles ; ref. * Vertical angles G special tiles ; ref. * Valleys H special tiles ; ref. * Fittings J special tiles ; ref. * ( ACCD) nr ( ACCD) m ( ACCD) m ( ACCD) m special tiles ; ref. * ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.11/2

To C olle ction

$

ROOF TILING C O L L E C T I O N Page No. Page No. MODBQ.11/1 MODBQ.11/2 ...................................... ......................................

Bill Nr. MODBQ.11 - ROOF TILING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.11/3

Bill Nr. MODBQ.12 WOOD WORKS STRUCTURAL TIMBER Sawn hardwood Floor joists A * x * Roof joists B * x * Ceiling joists C * x * Floor beams D * x * Roof beams E * x * Ceiling beams F * x * Purlins G * x * ; *m in one length Rafters H * x * ; *m in one length Struts J * x * Nogging K * x * ; between * deep partition studs ( ACCD) ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/1

To C olle ction

$

WOOD WORKS STRUCTURAL TIMBER (Cont'd) Carpentry metal work Galvanised steel cleats ; bolted with * bolts to concrete A * x * x * Stainless steel pins ; built into brickwork or blockwork ; * B * diameter x * long FLOORING Hardwood Block flooring ; butt joints ; basket pattern ; bedding in cold bitumen/rubber emulsion adhesive ; finishing for * polishing C D * thick ; * x * blocks ( ACCD) m2 ( ACCD) nr ( ACCD) nr

extra over * thick block flooring for straight two block borders ( ACCD) * x * access traps ; in * thick block flooring ( ACCD) Teak Parquet flooring ; tongued and grooved joints ; secret nailing ; finishing for * polishing

m

E

nr

F G

* thick ; * x * blocks

( ACCD)

m2

* thick x * wide nosings ; tongued to flooring ( ACCD) * x * mat wells ; in * thick parquet flooring

m

H

( ACCD)

nr

Parquet flooring in preformed panels ; butt joints ; * pattern ; bedding in cold bitumen/rubber emulsion adhesive ; finishing for * polishing J * thick ; * x * blocks ; in * x * preformed panels ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/2

To C olle ction

$

WOOD WORKS FLOORING (Cont'd) Strip flooring ; tongued and grooved joints ; secret nailing ; on and including * x * sawn hardwood battens at * centres both ways ; finishing for * polishing A B * thick ; * wide boards ( ACCD) m2

* thick x * wide nosings ; tongued to flooring ( ACCD) Accessories Brass dividing strips

m

C

3 x 50 ; setting between finishes ( ACCD) Movement joints ; *

m

D

* x * deep ; setting between finishes RAISED ACCESS FLOORS

( ACCD)

m

Designing, supplying and fixing raised access floor system ; * ; * supporting system and frames ; including pedestals, bearing pads, fixings, trims and all necessary accessories to complete installation ; all in accordance with the manufacturer's instructions ; as drawing nr. * Floors ; * high cavity ; * patterned E * thick ; * x * panels Skirtings ; * ; fixing with * F * x * high Ramps ; rising from * to * high G * thick ; * x * panels ; ramp size * x * overall ( ACCD) Extra over * thick panels for * panels to floors H * x * ; ref. * ( ACCD) nr ( ACCD) m ( ACCD) m2

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/3

To C olle ction

$

WOOD WORKS

DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS Hardwood Framed, ledged and braced doors ; swinging ; * ; as drawing nr. * A * x * high ; * thick boarding ; * wide boards ; tongued and grooved joints, V jointed one side ; * x * stiles ; * x * top rails ; * x * middle and bottom rails ; * x * braces ( ACCD) Framed, ledged and braced doors ; sliding ; shaped heads ; as drawing nr. * B * x * high ; * thick boarding ; * wide boards ; tongued and grooved joints, V jointed one side ; * x * stiles ; * x * top rails ; * x * middle and bottom rails ; * x * braces ; * meeting stiles ( ACCD) Flush doors ; single leaf ; swinging ; hollow core ; faced both sides with Grade 1 veneer bonded plywood ; hardwood lipping to all edges C D size * x * x * thick ( ACCD) nr

nr

nr

extra over * thick doors for forming openings * x * for glass ; hardwood lipping to all edges of opening ( ACCD) Flush doors ; single leaf ; swinging ; hollow core ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges

nr

E F

size * x * x * thick

( ACCD)

nr

extra over * thick doors for forming openings * x * for teak louvres ; * x * horizontal louvres at * centres ; teak lipping to all edges of opening ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/4

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) Flush doors ; single leaf ; swinging ; solid core ; faced both sides with Grade 2 veneer bonded plywood ; teak lipping to all edges A size * x * x * thick ; * x * beads ( ACCD) extra over * thick doors for forming openings * x * for glass ; teak lipping to all edges of opening ( ACCD) Flush doors ; single leaf ; swinging ; solid core ; faced both sides with teak veneered Grade 2 veneer bonded plywood ; teak lipping to all edges C size * x * x * thick ; * x * mouldings

nr

B

nr

( ACCD)

nr

D

extra over * thick doors for forming openings * x * for teak louvres ; * x * horizontal louvres at * centres ; teak lipping to all edges of opening ( ACCD) Flush doors ; double leaves ; swinging ; shaped heads ; hollow core ; faced both sides with teak veneered Grade 2 veneer bonded plywood ; teak lipping to all edges

nr

E

size * x * x * thick ; * meeting stiles ( ACCD) extra over * thick doors for forming openings * x * for glass ; teak lipping to all edges of opening ( ACCD) Flush doors ; double leaves ; swinging ; solid core ; faced both sides with laminated plastic class HG * thick ; type I adhesive bonded to Grade 2 veneer bonded plywood ; teak lipping to all edges

nr

F

nr

G

size * x * x * thick ; * meeting stiles ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/5

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) A extra over * thick doors for forming openings * x * for teak louvres ; * x * horizontal louvres at * centres ; teak lipping to all edges of opening ( ACCD) Casements and frames ; in one pane ; as drawing nr. * B size * x * x * thick ; * x * frames ; * x * edgings ; * x * beads ( ACCD) Door frames ; fixing with * bolts ; pelleting C * x * ; rebated head and jambs ; to suit doors * x * high overall ; * x * sawn hardwood grounds ( ACCD) Door linings ; fixing with * D * x * ; hollowed jambs ; to suit doors * x * high overall ; * x * sawn hardwood grounds ( ACCD) Trims ; fixing with stainless steel screws ; plugging E * x * ( ACCD) nr

nr

nr

nr

nr

Architraves ; fixing with stainless steel screws ; plugging F * x * Teak Panelled doors ; swinging ; in one panel ; open for glass G size * x * x * thick ; * x * stiles and top rails ; * x * middle and bottom rails ; * rounded stiles ; * nr. * x * glazed panels ; * x * beads ( ACCD) nr

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/6

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) Panelled doors ; sliding ; in * panels ; open for louvres A size * x * x * thick ; * x * stiles and top rails ; * x * middle and bottom rails ; * nr. * x * louvred panels ; * ( ACCD) Louvres and frames infilling with * x * horizontal louvres with one labour at * centres B * x * x * thick ; * x * frames Door frames ; fixing with * bolts ; pelleting C * x * ; rebated head and jambs ; to suit doors * x * high overall ; * x * sawn hardwood grounds ( ACCD) Door linings ; fixing with * D * x * ; hollowed jambs ; to suit doors * x * high overall ; * x * sawn hardwood grounds ( ACCD) Architraves ; fixing with stainless steel screws E * x * ( ACCD) m ( ACCD) nr

nr

nr

nr

Plywood ; Grade 1 veneer bonded ; faced both sides with laminated plastic ; class VG * thick ; type I adhesive bonded Duct access doors and frames ; single leaf F door size * x * ; * thick ; * x * hardwood frames ; * x * hardwood edgings ( ACCD) Trap doors and frames ; single leaf G door size * x * ; * thick ; * x * hardwood frames ( ACCD)

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/7

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) Designing, supplying and fixing proprietary fire rated doors ; * Fire rated doors and frames ; single leaf ; swinging ; solid core ; * hour fire resistance rating ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges ; tested to BS 476 A door size * x * x * thick ; ironmongery comprising *

( ACCD)

sets

Fire rated doors and frames ; single leaf ; swinging ; solid core ; * hour fire resistance rating ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with laminated plastic class HG * thick ; type I adhesive bonded to Grade 1 veneer bonded plywood ; hardwood lipping to all edges ; tested to BS 476 B door size * x * x * thick ; ironmongery comprising *

( ACCD)

sets

Fire rated doors and frames ; single leaf ; swinging ; solid core ; * hour fire resistance rating ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges ; tested to BS 476 C door size * x * x * thick ; ironmongery comprising *

( ACCD)

sets

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/8

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) Fire rated doors and frames ; double leaves ; swinging ; solid core ; * hour fire resistance rating ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges ; tested to BS 476 A door size * x * x * thick ; * meeting stiles ; * nr. * x * high glass panels in * thick * glass ; ironmongery comprising * ( ACCD) Fire rated doors and frames ; double leaves ; swinging ; shaped heads ; solid core ; * hour fire resistance rating ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges ; tested to BS 476 B door size * x * x * thick ; * meeting stiles ; ironmongery comprising *

sets

( ACCD)

sets

Fire rated doors and frames ; double leaves ; swinging ; solid core ; * hour fire-resisting ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with laminated plastic class HG * thick ; type I adhesive bonded to Grade 1 veneer bonded plywood ; hardwood lipping to all edges ; tested to BS 476 C door size * x * x * thick ; * meeting stiles ; * nr. * x * high glass panels in * thick * glass ; ironmongery comprising * ( ACCD)

sets

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/9

To C olle ction

$

WOOD WORKS DOORS, HATCHES, VENTILATORS AND THE LIKE AND FRAMES AND LININGS (Cont'd) Fire rated doors and frames ; double leaves ; sliding ; solid core ; * hour fire-resisting ; * x * door frames ; associated packings, grounds, smoke seals and intumescent strips ; fixing cramps, dowels and other accessories ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; teak lipping to all edges ; tested to BS 476 A door size * x * x * thick ; * meeting stiles ; ironmongery comprising * LININGS AND CLADDINGS ; INTERNALLY Hardwood ; boarding ; sanded To walls ; fixing with * bolts at * centres both ways ; pelleting B * thick Plywood ; Grade 1 veneer bonded To ceilings and sides and soffits of beams ; fixing with screws ; plugging C * thick ( ACCD) m2 ( ACCD) m2

( ACCD)

sets

Laminated plastic * thick ; class HG ; type I adhesive bonded To * D * thick ; * thick * backing Fabric lining * thick * ; * thick * foam rubber ; * thick * backing ; fixing with screws E * thick (overall) ( ACCD) m2 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/10

To C olle ction

$

WOOD WORKS

PROFILED SHEET ROOF COVERINGS AND WALL CLADDINGS Fibre cement profiled sheets ; * side laps ; * end laps ; fixing with * bolts at * centres both ways ; bedding laps with an approved sealant To roofs ; * degrees pitch ; fixing at 300 centres to sheeting rails spaced at * centres A * thick ; on metal ( ACCD) m2

Extra over roof coverings for roof light units B * x * ; * ( ACCD) nr

Extra over roof coverings for ventilators C * x * ; * ( ACCD) nr

Thermoplastic sheet claddings ; * side laps ; * end laps ; fixing with * bolts at * centres both ways ; bedding laps with an approved sealant To walls ; fixing at 300 centres to framing rails spaced at * centres D * thick ; on metal ( ACCD) m2

Extra over wall claddings for ventilators E * x * ; * ( ACCD) nr

Accessories ; fixing at 300 centres ; on metal F G H skirtings ; * x * aprons and sills ; * x * ( ACCD) ( ACCD) m m

sleeves ; to holes for pipes ; * x * ( ACCD) Fire stops ; * ; * hour resistance rating

nr

J

* x *

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/11

To C olle ction

$

WOOD WORKS

TIMBER SUSPENDED CEILINGS ; INTERNALLY Hardwood Supports for suspended ceilings ; suspended from concrete soffits ; * hanger at * centres ; fixing with * bolts A skeleton grounds ; * ; at * centres one way ; at * centres other way ; depth of suspension 0.50 - 2.00m ( ACCD) Acoustic tiles ; organic fibre insulating board ; * x * x * thick ; plain surfaces Fixing to wood supports (measured separately) with * B generally ( ACCD) m2

m2

INSULATION, PROOFING WORKS AND FIRE STOPS Acoustic linings ; insulation board ; * ; * decibel reduction rating To plain areas ; horizontal ; fixing with screws ; plugging C * thick ( ACCD) m2

Insulation linings ; glass fibre insulation quilt ; * ; * hour fire rating To plain areas ; vertical ; fixing with adhesive D * thick UNFRAMED TRIMS Hardwood Skirtings E * x * Architraves F * x * Picture rails G * x * ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/12

To C olle ction

$

WOOD WORKS UNFRAMED TRIMS (Cont'd) Dado rails A * x * ( ACCD) m

Chair rails ; fixing with brass screws and cups B * x * ( ACCD) m

Cornices ; fixing with stainless steel screws and cups C * x * ( ACCD) m

Cappings ; fixing with stainless steel screws and cups D * x * Built-up skirtings E * x * ; comprising * ; * x * sawn hardwood grounds ( ACCD) Teak Skirtings F * x * Architraves G * x * Picture rails H * x * Dado rails J * x * ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/13

To C olle ction

$

WOOD WORKS

PARTITIONS Designing, supplying and fixing fixed partitions ; * ; all framing, insulation, sealants, vapour barriers, isolating membranes, moisture resistant treatment and lining ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall ; * thick * coverings on both sides A * high ; open framing above ceiling ; * girth

( ACCD)

m

Partitions ; * thick overall ; * thick * coverings on both sides ; semi-glazed ; * high glazing * above ground B * high ; with sloping cills and heads ; unfinished framing above ceiling ; * girth ( ACCD) * trims as cover piece to edges ; fixing with * C * x * x * Extra over * thick partitions for D E openings ; overall sizes * x * ( ACCD) nr ( ACCD) m

m

windows in * lights ; overall sizes * x * ; * thick * glass ; fixing glass with * ( ACCD) doors ; * ; overall sizes * x * ; ironmongery comprising * ( ACCD) Fixing for heavy fittings ; including all brackets, additional supports and fixing accessories

nr

F

nr

G H

sinks ; approximately * kg each ( ACCD) cupboards ; approximately * kg each

nr

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/14

To C olle ction

$

WOOD WORKS PARTITIONS (Cont'd) Designing, supplying and fixing toilet cubicle partitions ; * ; all framing, insulation, sealants, vapour barriers, isolating membranes, moisture resistant treatment and lining ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall with smooth edges ; * framing ; * thick * board lining on both sides A * x * high ; * nr. cubicles ; * nr. doors ; * x * ; * nr. longitudinal panels ; * x * ; complete with ironmongery comprising * for each door ( ACCD) Shelves B * x * wide Trays C * x * x * high ( ACCD) nr ( ACCD) nr

sets

Designing, supplying and fixing demountable office partitions ; * ; all framing, insulation, sealants, vapour barriers, isolating membranes, moisture resistant treatment and lining ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall with smooth edges ; * framing ; * thick * board lining on both sides D * x * high ; * nr. glazed panels ; * x * ; * thick * glass ; fixing glass with * ( ACCD) Shelves E * x * wide ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/15

To C olle ction

$

WOOD WORKS PARTITIONS (Cont'd) Trays A * x * x * high * trims ; fixed at junctions with adjoining constructions B * x * x * SLIDING AND FOLDING PARTITIONS Hardwood Partitions in * panels ; hollow core ; * arrangement ; faced both sides with teak veneered Grade 1 veneer bonded plywood ; * x * teak lipping to all edges C size * x * x * (overall) thick ; * rebated stiles ( ACCD) extra over * for forming openings * x * for glass ; teak lipping to all edges of opening ( ACCD) extra over * for forming openings * x * for teak louvres ; * x * horizontal louvres at * centres ; teak lipping to all edges of opening ( ACCD) Partitions in * panels ; solid core ; * arrangement ; faced one side with teak veneered Grade 1 veneer bonded plywood ; faced other side with laminated plastic class HG * thick ; type I adhesive bonded to Grade 1 veneer bonded plywood F size * x * x * (overall) thick ; * rounded stiles ; * x * mouldings ( ACCD) extra over * for forming openings * x * for glass ; teak lipping to all edges of opening ( ACCD) extra over * for forming openings * x * for teak louvres ; * x * horizontal louvres at * centres ; teak lipping to all edges of opening ( ACCD) ( ACCD) m ( ACCD) nr

nr

D

nr

E

nr

nr

G

nr

H

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/16

To C olle ction

$

WOOD WORKS SLIDING AND FOLDING PARTITIONS (Cont'd) Partition frames ; fixing with * bolts ; pelleting A * x * ; rebated head and jambs ; to suit sliding and folding partition * x * high overall ; * x * sawn hardwood grounds ( ACCD) Trims ; fixing with brass screws B * x * ( ACCD) m

nr

Architraves ; fixing with stainless steel screws C * x * Teak Architraves ; fixing with stainless steel screws D * x * ( ACCD) m ( ACCD) m

FURNITURE, FITTINGS, SHELVING AND RACKS Supplying and fixing cupboards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood backs and bottoms ; * thick Grade 1 veneer bonded plywood fronts, sides or divisions ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * x * thick marine plywood tops ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * hardwood frames ; * x * teak edgings E * x * x * high ; * nr. doors, * ; * nr. drawers, * ; ironmongery comprising * ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/17

To C olle ction

$

WOOD WORKS FURNITURE, FITTINGS, SHELVING AND RACKS (Cont'd) Supplying and fixing kitchen cupboards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood backs and bottoms ; * thick Grade 1 veneer bonded plywood fronts, sides or divisions ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * x * thick blockboard tops ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * hardwood frames ; * x * teak edgings A * x * x * high ; * nr. doors, * ; * nr. drawers, * ; ironmongery comprising * ( ACCD) Supplying and fixing kitchen wall cupboards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood backs ; * thick Grade 1 veneer bonded plywood top, bottoms, sides or divisions ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * hardwood frames ; * x * hardwood edgings B * x * x * high ; * nr. glass panels, * ; ironmongery comprising * ( ACCD)

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/18

To C olle ction

$

WOOD WORKS FURNITURE, FITTINGS, SHELVING AND RACKS (Cont'd) Supplying and fixing bookcases ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood fronts, backs, tops, bottoms, shelves, sides or divisions ; covered with * thick laminated plastic ; class HG type I adhesive bonded ; * x * hardwood frames ; * x * beech edgings A * x * x * high ; ironmongery comprising *

( ACCD)

nr

Supplying and fixing notice boards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * bonded plywood boards ; * x * stiffeners ; * B thick Grade 1 veneer backs ; * thick * notice hardwood frames and x * teak edgings

* x * high ; ironmongery comprising *

( ACCD)

nr

Supplying and fixing chalk boards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood backs ; * thick * chalkboards ; * x * hardwood frames and stiffeners ; * x * hardwood edgings ; * x * hardwood chalk rails C * x * high ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/19

To C olle ction

$

WOOD WORKS FURNITURE, FITTINGS, SHELVING AND RACKS (Cont'd) Supplying and fixing sinks and draining boards ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick marine plywood tops ; covered with * thick laminated plastic ; class HG type I adhesive bonded A * x * wide ; * nr. openings for sinks and taps ( ACCD) Supplying and fixing shelving ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Consisting of * thick Grade 1 veneer bonded plywood fronts, backs, tops, bottoms, shelves, sides or divisions ; * x * hardwood frames ; * x * beech edgings B * x * x * high ; ironmongery comprising *

nr

( ACCD)

nr

Supplying and fixing sign boards and signage ; fixing to * ; all necessary fixing screws, bolts, ironmongery and fittings, silicone sealant pointing and all painting ; as drawing nr. * Sign boards ; consisting of * x * hardwood frames ; * x * hardwood edgings ; * thick Grade 1 veneer bonded plywood fronts, backs and sides C * x * ; * nr. * high painted Chinese characters ; * nr. * high painted letters ; ref. * ( ACCD) * x * ; * nr. * high painted letter ; * nr. * high painted numerals ; ref. *

nr

D

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/20

To C olle ction

$

WOOD WORKS FURNITURE, FITTINGS, SHELVING AND RACKS (Cont'd) Sign boards ; consisting of * x * hardwood frames ; * x * hardwood edgings ; * thick Grade 1 veneer bonded plywood backs and sides ; * thick acrylic front panels A * x * ; * nr. * high cut out Chinese characters ; * nr. * high cut out letters ; ref. * ( ACCD) * x * ; * nr. * high cut out letters ; * nr. * high symbols ; ref. * ( ACCD) Signage ; consisting of * x * hardwood frames ; * x * hardwood edgings ; * thick Grade 1 veneer bonded plywood backs C * x * ; * nr. * high painted Chinese characters ; * nr. * high painted letters ; ref. * ( ACCD) * x * ; * nr. * high silkscreened letters ; ref. * ( ACCD) Signage ; consisting of * x * hardwood frames ; * x * hardwood edgings ; * thick Grade 1 veneer bonded plywood backs ; * thick acrylic front panels E * x * ; * nr. * high cut out Chinese characters ; * nr. * high cut out letters ; ref. * ( ACCD) * x * ; * nr. * high cut out letters ; * nr. * high numerals ; ref. * ( ACCD) STAIRS, HANDRAILS AND BALUSTRADES Staircases ; geometrical, rectangular on plan ; in * nr. flights ; * nr. intermediate landings ; hardwood ; including all necessary fixing screws, bolts and fittings and all painting ; as drawing nr. * Stairs ; supporting framework comprising * ; facings comprising * G * x * x * high overall ; comprising * nr. risers, * nr. treads, * nr. winders ( ACCD)

nr

B

nr

nr

D

nr

nr

F

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/21

To C olle ction

$

WOOD WORKS STAIRS, HANDRAILS AND BALUSTRADES (Cont'd) Handrails A * x * rails ; * labours ; hollowed for and screwed to * x * metal core (measured separately) ( ACCD) extra for * rails for ramps extra for * rails for wreaths Balustrades D comprising * x * rails * average high ; * x * balusters at * centres ( ACCD) extra for * balustrades for ramps ( ACCD) extra for * balustrades for * x * x * ornamental ends ( ACCD) ( ACCD) ( ACCD)

m nr nr

B C

m

E

nr

F

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/22

To C olle ction

$

WOOD WORKS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.12/1 MODBQ.12/2 MODBQ.12/3 MODBQ.12/4 MODBQ.12/5 MODBQ.12/6 MODBQ.12/7 MODBQ.12/8 MODBQ.12/9 MODBQ.12/10 MODBQ.12/11 MODBQ.12/12 MODBQ.12/13 MODBQ.12/14 MODBQ.12/15 MODBQ.12/16 MODBQ.12/17 MODBQ.12/18 MODBQ.12/19 MODBQ.12/20 MODBQ.12/21 MODBQ.12/22 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.12 - WOOD WORKS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.12/23

Bill Nr. MODBQ.13 IRONMONGERY IRONMONGERY Collecting from Government Logistics Department and FIXING ONLY Hinges A B C D E F butt hinges ; 63 x 35 butt hinges ; 76 x 41 butt hinges ; 76 x 48 butt hinges ; 102 x 76 parliament hinges ; 102 x 152 spring hinges ; single action Bolts G H J K L M N barrel bolts ; 75 barrel bolts ; 100 barrel bolts ; 150 barrel bolts ; 250 flush bolts ; lever type ; 150 flush bolts ; lever type ; 250 lavatory indicating bolts Door and drawer handles P Q R S T U pull handles ; 200 pull handles ; 300 bow handles ; 150 wardrobe handles ; 150 drawer pulls ; 100 flush pulls ; 100 x 52 ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/1

To C olle ction

$

IRONMONGERY IRONMONGERY (Cont'd) A combined cylinder ring and door pulls ; 75 x 45 ( ACCD) Locks and latches B C D E mortice locks ; horizontal mortice locks ; upright mortice locks ; upright ; dead ( ACCD) ( ACCD) ( ACCD) nr nr nr

nr

mortice locks ; upright ; dead ; rebated forend ( ACCD) mortice locks ; upright ; with thumb-turn mortice latches ; horizontal mortice latches ; upright ; cylinder cylinder rim night latches cylinder mortice night latches drawer locks Lock and latch furniture

nr

F

( ACCD) ( ACCD)

nr nr

G H

( ACCD) ( ACCD) ( ACCD) ( ACCD)

nr nr nr nr

J K L

M N P Q

single knob furniture set of knob furniture set of lever handles keyhole escutcheons Door fittings

( ACCD) ( ACCD) ( ACCD) ( ACCD)

nr nr nr nr

R S T U

finger plates ; 330 x 82 cabin hooks ; 150 cabin hooks ; 250

( ACCD) ( ACCD) ( ACCD)

nr nr nr

cabin hooks ; double hinged ; 150 ( ACCD) door chains and keeps ball catches ( ACCD) ( ACCD)

nr nr nr

V W

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/2

To C olle ction

$

IRONMONGERY IRONMONGERY (Cont'd) A B C inspection lenses ; wide angle rubber door stops ( ACCD) ( ACCD) nr nr nr

rubber door stops ; for concrete ( ACCD) Cupboard fittings

D E F G

cupboard catches ball catches magnetic door catches ; small magnetic door catches ; large Door closers

( ACCD) ( ACCD) ( ACCD) ( ACCD)

nr nr nr nr

H J

overhead door closers

( ACCD)

nr

floor springs ; single action ; setting boxes in floor ; filling with hydraulic fluid ( ACCD) floor springs ; double action ; setting boxes in floor ; filling with hydraulic fluidn ( ACCD) Hat and coat hooks

nr

K

nr

L M N

coat hooks

( ACCD)

nr nr nr

coat hooks ; with rubber buffer ( ACCD) hat and coat hooks ( ACCD)

SUPPLYING AND FIXING ironmongery ; * Hinges P butt hinges ; BS EN 1935 Grade * ; satin finish stainless steel ; * x * ; class * ( ACCD) parliament hinges ; BS EN 1935 Grade * ; satin finish stainless steel ; * x * ; class * ( ACCD) Bolts R barrel bolts ; brass ; * long ; BS EN 12051 class * ; ref. * ( ACCD)

nr

Q

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/3

To C olle ction

$

IRONMONGERY IRONMONGERY (Cont'd) A flush bolts ; lever type ; chromium plated brass ; * long ; ref. * ( ACCD) lavatory indicating bolts ; satin anodised aluminium ; ref. * ( ACCD) Door and drawer handles C pull handles ; chromium plated brass ; * x * projection ; ref. * ( ACCD) drawer pulls ; satin finish stainless steel ; ref. * Locks and latches E mortice locks ; horizontal ; ref. * ; in master-keying suites ( ACCD) mortice locks ; with thumb-turn ; ref. * ( ACCD) mortice latches ; horizontal ; ref. *

nr

B

nr

nr

D

( ACCD)

nr

nr

F

nr

G

( ACCD)

nr

H

cylinder rim night latches ; horizontal ; lock cylinder to BS EN 1303 Grade 5 ; ref. * ( ACCD) drawer locks ; ref. * Lock and latch furniture ( ACCD)

nr nr

J

K

single knob furniture ; for locks ; class * ; satin finish stainless steel ( ACCD) set of knob furniture ; for locks ; class * ; ref. * ( ACCD) set of lever handles ; for * locks ; class * ; ref. * ( ACCD) keyhole escutcheons ; for * locks ; class * ; ref. * ( ACCD) Door fittings

nr

L

nr

M

nr

N

nr

P

kick plates ; satin finish stainless steel ; * x * x * thick ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/4

To C olle ction

$

IRONMONGERY IRONMONGERY (Cont'd) A cabin hooks ; satin anodised aluminium ; ref. * Cupboard fittings B C ball catches ; ref. * magnetic door catches ; ref. * Door closers D overhead door closers ; BS EN 1154 class * ; universal arm ; * construction ; ref. * ( ACCD) floor springs ; single action ; setting boxes in floor ; filling with hydraulic fluid ; BS EN 1154 class * ; power adjustable ; * construction ; ref. * ( ACCD) Panic exit devices F horizontal bar operated panic exit device ; BS EN 1125 Grade * ; with vertical shoots ; for single door * wide ; * ; ref. * ( ACCD) Hat and coat hooks G coat hooks ; satin anodised aluminium ; ref. * Shelf fittings H slotted channels ; satin finish stainless steel ; * x * ( ACCD) shelf brackets ; satin anodised aluminium ; * x * ( ACCD) Curtain tracks K curtain tracks ; regular duty ; enamelled steel C section ; * length (overall) ; brackets at * (maximum) centres ; end stops ; centre overlap sets ; * nylon runners per metre ; cord operating ; ref. * ( ACCD) ( ACCD) ( ACCD) nr nr

( ACCD)

nr

nr

E

nr

nr

( ACCD)

nr

m

J

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/5

To C olle ction

$

IRONMONGERY IRONMONGERY (Cont'd) Sliding door gear ; BS EN 1527 ; to door size * x * high A gear set comprising * top tracks * section ref. * ; * channels * ref. * ; * brackets * ref. * ; * hangers * ref. * ; * sliders * ref. * ; * flush pulls * ref. * ; * door lock * ref. * ( ACCD) Toilet fittings B chromium plated toilet roll holders ; ref. * Signs and lettering C D signs ; plastic ; * x * ( ACCD) nr

sets

( ACCD)

nr

letters or numerals ; plastic ; * high ( ACCD) Chinese characters ; plastic ; * high ( ACCD) SUNDRIES Sundry items Mosquito gauze

nr

E

nr

F

plastic covered glass fibre 7 x 7 mesh per 10 square millimetres ; fixing with wood beads (measured separately) ( ACCD) Plastic handrails ; as *

m2

G

fixing over * x * steel core rail (measured separately) ; including welding joints, ends, bends, ramps, wreaths and quadrants ( ACCD) Shower curtain rails ; tubular ; stainless steel heavy duty ; plugging and screwing with stainless steel screws

m

H

* diameter x * thick ; * length (overall) ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/6

To C olle ction

$

IRONMONGERY SUNDRIES (Cont'd) Hanging rails ; tubular ; stainless steel heavy duty ; plugging and screwing with stainless steel screws A * diameter x * thick ; * length (overall) ( ACCD) Water bars ; galvanised steel ; bedding in waterproofing cement mortar B * x * ( ACCD) m

nr

Dowels ; galvanised steel ; bedding in cement mortar C * diameter x * long Fixing cramps ; galvanised steel D * x * x * girth ; once bent; twice holed ; fanged end ( ACCD) Metal trims ; stainless steel ; flat strips ; fixing by bolts (measured separately) E * x * Door seals ; ref. * ; fixing with stainless steel screws F * x * wide ( ACCD) m ( ACCD) m ( ACCD) nr

nr

Expanding anchor bolts ; bolt projecting type ; galvanised steel G * diameter x * long Anchor bolts ; steel H * diameter x * long Handrail brackets ; galvanised steel J * x * x * girth ; * x * x * flange plate ; fixing by bolts (measured separately) ( ACCD) Timber connectors ; galvanised steel ; * type K * diameter ; fixing by bolts (measured separately) ( ACCD) nr ( ACCD) nr

nr

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/7

To C olle ction

$

IRONMONGERY C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.13/1 MODBQ.13/2 MODBQ.13/3 MODBQ.13/4 MODBQ.13/5 MODBQ.13/6 MODBQ.13/7 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.13 - IRONMONGERY To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.13/8

Bill Nr. MODBQ.14 STEEL AND METAL WORKS STRUCTURAL STEEL WORK Steel structure ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded and bolted fabrication Columns A * x * x * kg universal columns Beams B * x * x * kg universal beams Bracing C D * x * x * kg universal beams * x * x * kg angles Purlins and cladding rails E F G * x * x * kg universal beams * x * x * kg tees * x * x * kg angles Grillages H J K L * x * x * kg universal columns * x * x * kg universal beams * x * x * kg channels * thick plates ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg ( ACCD) ( ACCD) ( ACCD) kg kg kg ( ACCD) ( ACCD) kg kg ( ACCD) kg ( ACCD) kg

Built-up columns, trestles and towers ; In nr. * M N P Q * x * x * kg universal beams * x * x * kg universal columns * x * x * kg channels * x * x * kg tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/1

To C olle ction

$

STEEL AND METAL WORKS STRUCTURAL STEEL WORK (Cont'd) A B * x * x * kg angles * thick plates Connections C D E F * x * x * kg joists * x * x * kg channels * x * x * kg angles * x * x * kg tees Turned bolts ; nuts and washers G * diameter x * long ( ACCD) nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) kg kg kg kg ( ACCD) ( ACCD) kg kg

High strength friction grip bolts ; nuts and washers H * diameter x * long Space frames ; * J * x * x * high overall ( ACCD) nr ( ACCD) nr

Surface preparation ; applying painting system Type A as General Specification for Building Table 15.7 ; on structural steel ; before fixing K general surfaces ( ACCD) m2

Fire protection to structural steel ; sprayed mineral coating L general surfaces LININGS, COVERINGS AND CLADDINGS Linings ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised Sheet linings ; fixed to concrete ; * thick plywood backings ; * x * hardwood grounds at * centres both ways ; all necessary * frames, angles, cleats, fixing lugs, screws and anchor bolts, etc. ; in * x * maximum panels ; pointing joints with polysulphide sealant ; as drawing nr. * M * thick to walls and columns ( ACCD) m2 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/2

To C olle ction

$

STEEL AND METAL WORKS LININGS, COVERINGS AND CLADDINGS (Cont'd) A * thick to ceilings, and sides and soffits of beams ( ACCD) Claddings ; stainless steel to BS * grade * ; * finish Sheet linings ; fixed to concrete ; * thick plywood backings ; * x * hardwood grounds at * centres both ways ; all necessary * frames, angles, cleats, fixing lugs, screws and anchor bolts etc. ; in * x * maximum panels ; pointing joints with polysulphide sealant ; as drawing nr. * B C * thick to walls and columns ( ACCD) m2

m2

* thick to ceilings, and sides and soffits of beams ( ACCD) ROOFING AND FLASHINGS Sheet lead ; BS EN 12588 Roofing ; copper clips ; * welted laps ; measured net - allow for laps ; copper nailing

m2

D E

* thick roof coverings ; flat * thick gutters, valleys and coverings to hips and ridges

( ACCD)

m2

( ACCD)

m2

Slates ; 475 x 475 ; perforated for and with collar ; 75 high soldered on F to suit side roof outlet not exceeding 50 diameter

( ACCD)

nr

Slates ; 475 x 475 ; perforated for and with collar ; 150 high soldered on G to suit pipes not exceeding 50 diameter to suit pipes * diameter

( ACCD) ( ACCD)

nr nr

H

Aprons ; 150 high ; securing to tops of pipes with galvanised screw clips ; pointing with mastic J to suit pipes not exceeding 50 diameter

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/3

To C olle ction

$

STEEL AND METAL WORKS ROOFING AND FLASHINGS (Cont'd) A to suit pipes * diameter ( ACCD) nr

Sheet aluminium ; BS EN 485-1+A1, BS EN 515, BS EN 573-3, AN-1199 Flashings ; aluminium clips ; close nailing at * centres ; on * B * thick isolated strips at edge of asphalt felts and the like ; * girth ( ACCD) DOORS, GATES, SHUTTERS, GRILLES AND HATCHES Doors ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded and bolted connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Single leaf ; * thick sheet door linings ; * x * x * angle stiles and rails ; * x * x * angle door frames C door size * x * high overall ; type *

nr

( ACCD)

nr

Single leaf ; * thick sheet door linings ; * x * x * angle stiles and rails ; * x * x * angle door frames ; * hour fire resistance rating ; test certificate submitted for approval D door size * x * high overall ; type *

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/4

To C olle ction

$

STEEL AND METAL WORKS DOORS, GATES, SHUTTERS, GRILLES AND HATCHES (Cont'd) Doors ; stainless steel grade * ; * finish ; welded connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Double leaves ; * thick sheet door linings ; * x * x * angle stiles and rails ; * x * x * angle door frames A door size * x * high overall ; type *

( ACCD)

nr

Sliding folding partitions ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * In * equal leaves * folded width ; * thick sheet linings ; * x * x * angle stiles and rails ; * x * x * angle door frames ; * x * tracks ; * x * rails ; * shutter hoods ; * hour fire resistance rating ; test certificate submitted for approval B partition size * x * high overall ( ACCD) Hatches ; aluminium ; colour anodised ; tap screwed connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; painting back of frames with one coat bituminous paint before fixing ; bedding frames in water-proof cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Single leaf ; * thick sheet door linings ; * x * x * angle stiles and rails ; * x * x * angle door frames C door size * x * high overall ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/5

To C olle ction

$

STEEL AND METAL WORKS DOORS, GATES, SHUTTERS, GRILLES AND HATCHES (Cont'd) Grilles, screens and louvres ; stainless steel grade * ; * finish ; welded connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Single panels ; * x * x * frames ; * x * x * sub-frames ; * x * flat horizontal louvre blades at * vertical centres A * x * overall in * units ; type * ( ACCD) Gates ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Single leaf ; * x * x * frames ; * x * x * sub-frames ; * diameter grille bars at * centres B gate size * x * high overall ; type *

nr

( ACCD)

nr

Designing, supplying and fixing roller shutters ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; * ; channel guides, fixing lugs, brackets, hood casings, operating and locking devices and ironmongery ; assembling, jointing, cutting and pinning lugs ; bedding guide channels in cement mortar ; all in accordance with the manufacturer's instructions ; as drawing nr. * Roller shutters ; manually operating by chain C * x * clear opening size ; type * ( ACCD) Roller shutters ; electrically operating

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/6

To C olle ction

$

STEEL AND METAL WORKS DOORS, GATES, SHUTTERS, GRILLES AND HATCHES (Cont'd) A * x * clear opening size ; type * ( ACCD) Designing, supplying and fixing folding shutters ; aluminium ; clear anodised ; * ; channel guides, fixing lugs, brackets, hood casings, operating and locking devices and ironmongery ; assembling, jointing, cutting and pinning lugs ; bedding guide channels in cement mortar ; all in accordance with the manufacturer's instructions ; as drawing nr. * Folding shutters ; in * equal leaves ; * folded width ; manually operating B door size * x * overall ; type * ( ACCD) Designing, supplying and fixing collapsible gates ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; diamond pattern ; welded and riveted connections ; as drawing nr. * Collapsible gates ; 6 x 50 flat framing to head ; 6 x 50 flat framing to jambs ; * 12 diameter fixing lugs 50 long, one end welded other end fanged ; 15 x 50 flat framing in top and bottom guides ; * 15 x 50 flat fixing blocks 100 long at jambs ; pair of 6 x 50 flat vertical end pickets to both edges of gate ; pair of 6 x 25 flat vertical running pickets at 112 centres maximum ; 5 x 20 flat diagonal folding tie bars ; 6 diameter riveted pivot points with brass washers and spacers to 200 centres vertically to tie bars and 400 centres vertically to running pickets ; * 50 diameter x 15 wide ball bearing rollers ; three retaining catches ; catch hooks ; two brass pull handles ; locks C * x * overall ( ACCD) nr nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/7

To C olle ction

$

STEEL AND METAL WORKS DOORS, GATES, SHUTTERS, GRILLES AND HATCHES (Cont'd) Trap doors ; hinged ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded and bolted connections ; all necessary screw fixings, fixing lugs, tracks, counter balances, balance weights, restraining chains, rollers, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Comprising ; * thick sheet coverings ; * x * x * door frames ; * x * x * frames A * x * clear opening size ( ACCD) nr

Hose reel doors ; stainless steel grade * ; * finish ; welded and bolted connections ; all necessary screw fixings, fixing lugs, ironmongery, fittings, etc. ; assembling, jointing, cutting and pinning lugs ; bedding frames in cement mortar ; pointing joints with silicone sealant ; as drawing nr. * Single leaf ; comprising ; * thick sheet linings ; * x * x * door frames ; * x * x * frames B door size * x * overall ( ACCD) nr

FRAMED WORK, STAIRS, HANDRAILS AND BALUSTRADES ; HOT-ROLLED STEEL TO BS EN 10025 ; GRADE * ; GALVANISED Framed ventilators ; overall size * x * ; welded connections ; In nr. * Framing C D flats ; * x * angles ; * x * x * Louvre blades ; twice cranked E flats ; * x * Fixing lugs F bars ; * diameter ; * long ( ACCD) nr ( ACCD) m ( ACCD) ( ACCD) m m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/8

To C olle ction

$

STEEL AND METAL WORKS FRAMED WORK, STAIRS, HANDRAILS AND BALUSTRADES ; HOT-ROLLED STEEL TO BS EN 10025 ; GRADE * ; GALVANISED (Cont'd) A flats ; * x * ; * long Wire mesh ; welding B mesh ; galvanised ; * x * mesh per 10 square millimeters ( ACCD) Framed cat ladders ; bolted and riveted connections ; In nr. * Stringers C flats ; * x * Rungs D rods ; * diameter (In Nr. 0) Fixing brackets E F flats ; * x * ; * long angles ; * x * ; * long ( ACCD) ( ACCD) nr nr ( ACCD) m ( ACCD) m ( ACCD) nr

m2

Framed wall mounted handrails ; welded connections ; to nr. * staircases Handrails G flats ; * x * ; * long Wall brackets H * diameter x * girth ; once bent ; * diameter x * flange plate ; plugging and screwing ( ACCD) Framed balustrades ; welded connections ; to nr. * staircases Top rails J flats ; * x * Bottom rails K flats ; * x * Balusters L bars ; * diameter (In Nr. 0) ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/9

To C olle ction

$

STEEL AND METAL WORKS FRAMED WORK, STAIRS, HANDRAILS AND BALUSTRADES ; HOT-ROLLED STEEL TO BS EN 10025 ; GRADE * ; GALVANISED (Cont'd) A rods ; * diameter (In Nr. 0) Mat frames ; welded connections Framing ; * x * x * angles ; * x * x * fixing lugs with fanged end at * centres B overall size * x * ( ACCD) nr ( ACCD) m

FRAMED WORK, STAIRS, HANDRAILS AND BALUSTRADES ; STAINLESS STEEL GRADE * ; POLISHED FINISH Framed tubular handrails ; welded joints ; to * Handrails C tubing ; * nominal bore Balusters D tubing ; * nominal bore (In Nr. 0) ( ACCD) Extra over * diameter handrails for E F ramps bends Brackets G * diameter x * girth ; once bent ; * ( ACCD) FENCING AND GATES Gates ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; welded connections Single leaf ; * x * x * angle framing ; * nr. * x * panels infill with high tensile steel fabric ; spot welding ; 75 x 25 oblong hole mesh ; BS * ; * diameter wire ; spot welding ; including gate stops, gate catches and gate stays ; as drawing nr. * H gate size * x * high overall ( ACCD) nr ( ACCD) ( ACCD) nr nr ( ACCD) m

m

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/10

To C olle ction

$

STEEL AND METAL WORKS FENCING AND GATES (Cont'd) Ironmongery A pivot hinges ; 15 x 40 x 300 girth plate once bent and once rounded ; 25 diameter hardened steel rod 40 long with washer ; 50 x 50 x 16 plate twice rounded and once holed for 25 diameter pivot ( ACCD) sliding bolts ; 20 diameter shoot 500 girth once bent ; 50 x 50 x 10 holed guide twice rounded ; 25 diameter x 100 long tubing set in concrete ( ACCD) sliding bolts ; 20 diameter shoot 975 long ; * 50 x 50 x 10 holed guide twice rounded ; * 50 x 50 x 10 holed guide twice rounded with 25 stop ; * x * x * slotted hasp three times bent ; * x * x * staple holed and twice rounded ; 25 diameter x 100 long tubing set in concrete ( ACCD) brass padlocks ; * SUNDRIES Gratings and frames Gratings to floor channels ; cast iron ; in * lengths ; * x * slots at * centres E * thick x * wide ( ACCD) m ( ACCD)

nr

B

nr

C

nr nr

D

Frames to gratings for floor channels ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised F angles * x * x * ; * x * x * lugs at * centres ; casting in ( ACCD) Gratings or grilles to openings, ventilators and the like ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; * x * x * angle frames ; * x * flat grille bars at * centres G * x * ( ACCD) nr

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/11

To C olle ction

$

STEEL AND METAL WORKS SUNDRIES (Cont'd) Pressed, folded or extruded metal sections Pressed sections ; stainless steel grade * ; polished finish ; skirtings A * girth * times bent ; fixing with screws ( ACCD) Slotted steel angles ; self-finished ; framed and bolted connections Angle framing ; bolts, nuts and washers B * x * x * Rubber shoes C to end of * x * x * angle ( ACCD) nr ( ACCD) m

m

Hinged covers and frames to water tank Covers and frames ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; * thick sheet covers ; * thick base plates ; * x * x * angle frames ; * x * lock plate and * padlock ; including all fittings, fixing screws and bolts ; sealing cover in grease ; as drawing nr. * D * x * clear opening Step irons Step irons ; stainless steel grade * E general purpose pattern ; 100 tail ; casting into concrete ( ACCD) RAISED ACCESS FLOORS Designing, supplying and fixing raised access floor system ; * ; * supporting system and frames ; including pedestals, bearing pads, fixing trims and all necessary accessories to complete installation ; all in accordance with manufacturer's instructions ; as drawing nr. * Floors ; * high cavity F * thick ; * x * panels ( ACCD) m2 ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/12

To C olle ction

$

STEEL AND METAL WORKS RAISED ACCESS FLOORS (Cont'd) Skirtings ; * ; fixing with * A * x * high Ramps ; rising from * to * high B * thick ; * x * panels ; ramp size * x * overall ( ACCD) Extra over * thick panels for * panels to floors C * x * ; ref. * ( ACCD) nr ( ACCD) m

nr

PROFILED SHEET ROOF COVERINGS AND WALL CLADDINGS Galvanised steel corrugated sheets ; side laps of one and a half corrugations ; * end laps ; fixing with galvanised steel hook bolts and nuts, drive screws, large washers, self-tapping screws, roofing bolts, nuts and clips, roofing screws and sheeting clips ; bedding laps with an approved lap sealant ; * high above ground ; as drawing nr. * To roofs ; * degree pitch ; fixing at 300 centres to sheeting rails spaced at * centres D * thick ; on metal Extra over * for translucent sheets E * x * ; * ( ACCD) nr ( ACCD) m2

Accessories ; fixing at 300 centres ; on metal F G abutments ; * x * ridges ; * x * Cutting H raking ( ACCD) m ( ACCD) ( ACCD) m m

Firestops ; * ; * hour fire resistance rating J * x * ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/13

To C olle ction

$

STEEL AND METAL WORKS

PARTITIONS Designing, supplying and fixing fixed partitions ; * ; * frames ; * skirtings ; sealant, vapour barriers, isolating membranes, moisture resistant treatment and lining ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall ; * thick * coverings on both sides ; * decibel reducing rating A * high ( ACCD) m

* trims ; as cover piece to edges ; * B * x * x * Extra over * thick partitions for C openings ; overall size * x * ( ACCD) nr ( ACCD) m

Fixing for heavy fittings ; including all brackets, additional supports and fixing accessories D sinks ; approximately * kg each ( ACCD) Designing, supplying and fixing toilet cubicle partitions ; * ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall with smooth edges ; * framing ; * thick board linings on both sides E * x * on plan ; * high ; * nr. cubicles ; * nr. doors ; * x * ; * nr. longitudinal panels ; * x * high ; complete with ironmongery comprising * for each door ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/14

To C olle ction

$

STEEL AND METAL WORKS PARTITIONS (Cont'd) Designing, supplying and fixing office partitions ; * ; all necessary fittings, fixing accessories, screws, bolts and painting ; assembling and jointing all in strict accordance with the manufacturer's instructions ; as drawing nr. * Partitions ; * thick overall with smooth edges ; * framing ; * thick board linings on both sides; * A * x * high ; * nr. windows ; * x * ; * thick * glass ; fixing glass with * ( ACCD) * trims ; fixed at junctions with adjoining walls B * x * x * SUSPENDED CEILINGS Tiled or panelled ceilings ; * x * x * tiles ; * ; fully complying with the particular specification * ; laid in and including metal support framing comprising exposed grid of anodised aluminium T-section framing, metal hangers, brackets, ties, clips and fasteners, etc. ; * Ceilings C fixing to concrete soffits ; suspension depth not exceeding 150 ; 3.50 - 5.00m above floor level ( ACCD) Upstands D fixing vertically ; not exceeding 300 high ( ACCD) Extra over tiled ceilings for E access panels ; * x * ( ACCD) nr ( ACCD) m

nr

m2

m

* angle trims ; around openings formed by fittings ; plain F * x * wide ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/15

To C olle ction

$

STEEL AND METAL WORKS

WINDOWS AND GLAZED DOORS Designing, supplying and fixing windows ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; framing, water bars, fittings, fixing lugs, brackets, bolts and ironmongery ; * glazing beads ; PVC weatherstrip ; assembling, jointing, cutting and pinning lugs ; bedding in water-proof cement mortar ; glazing measured separately ; as drawing nr. * Windows A B * x * overall ; * fixed lights ( ACCD) nr

* x * overall ; * fixed lights ; * side hung opening lights ( ACCD) * x * overall ; * fixed lights ; * top hung opening lights ( ACCD) Composite windows

nr

C

nr

D

* x * overall ; in nr. * individual units ; * fixed lights ; * side hung opening lights ; * coupling mullions ( ACCD) Composite windows and doors

nr

E

* x * overall ; in nr. * individual units ; * fixed lights ; * top hung opening lights ; * side hung doors ; * coupling mullions ; * coupling transoms ; including ironmongery comprising * ( ACCD) Designing, supplying and fixing windows ; aluminium ; colour anodised ; framing, water bars, fittings, fixing lugs, brackets, bolts and ironmongery ; * glazing beads ; PVC weatherstrip ; assembling, jointing, cutting and pinning lugs ; painting back of frames with one coat of bituminous paint before fixing ; bedding frames in water-proof cement mortar ; glazing measured separately ; as drawing nr. * Windows

nr

F

* x * overall ; * fixed lights

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/16

To C olle ction

$

STEEL AND METAL WORKS WINDOWS AND GLAZED DOORS (Cont'd) A * x * overall ; * fixed lights ; * side hung opening lights ( ACCD) * x * overall ; * fixed lights ; * top hung opening lights ( ACCD) Composite windows and doors C * x * overall ; in nr. * individual units ; * fixed lights ; * top hung opening lights ; * side hung doors ; * coupling mullions ; * coupling transoms ; including ironmongery comprising * ( ACCD) SHOP FRONTS Designing, supplying and fixing shop fronts ; aluminium ; organic coating ; painted PVDF finish ; all necessary coping, flashing, glazing beads, fixing, ironmongery, gasket and sealant, painting, connections and provision of anchorages ; assembling, jointing, cutting and pinning lugs ; as outlined on drawing nr. * and Particular Specification * Shop fronts comprising * x * x * framing at * centres ; * thick * glass panels ; * cill board D * high * trims ; to edges and joints E * x * x * Extra over * high shop front for F door openings with door ; * ; * x * high ( ACCD) ( ACCD) m ( ACCD) m

nr

B

nr

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/17

To C olle ction

$

STEEL AND METAL WORKS

CURTAIN WALLING Designing, supplying and fixing curtain walling system ; aluminium ; organic coating ; painted PVDF finish ; comprising framing, glazing, coping, sill, closure panel, flashing, fittings, insulation and fire resistance material ; all necessary fixings, gasket and sealant, connections and provision of anchorages ; assembling, jointing, cutting and pinning lugs ; as outlined on drawing nr. * and Particular Specification * Glazing panels and framing system A clear tempered glass ; type * ; flat ( ACCD) * glass ; type * ; curved ; * radius

m2

B

( ACCD)

m2

Extra over * glazing panels and framing system for C solid panels ; * thick ; aluminium ; anodised ( ACCD) opening lights ; size * x * high ; top hung ; glazing with * glass ; * ( ACCD) opening lights ; size * x * high ; side hung ; glazing with * glass ; * ( ACCD) doors ; overall size * x * high ; single leaf ; * finishes ; * frames and ironmongery comprising * ( ACCD) Sundries Provision of samples G material samples and prototypes ( ACCD) item -

m2

D

nr

E

nr

F

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/18

To C olle ction

$

STEEL AND METAL WORKS CURTAIN WALLING (Cont'd) Testing Laboratory test A laboratory tests on mock-ups ; as General Specification for Building clause 16.73 ; re-test as required to achieve satisfactory results ( ACCD) Field test B field test on actual building ; as General Specification for Building clause 16.74 ; re-test as required to achieve satisfactory results ( ACCD) structural silicone test ; as General Specification for Building clause 16.75 ; re-test as required to achieve satisfactory results ( ACCD) FURNITURE, FITTINGS, SHELVING, RACKS, PLAYGROUND EQUIPMENT, ETC. Supplying and fixing furniture, fittings, shelving, racks and the like ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; including framing, fittings, fixing bolts, screws and ironmongery; pointing around edges with silicone sealant ; all necessary painting and coating ; as drawing nr. * Cupboards D * x * x * high overall ; * nr. cupboard doors ; * ; * nr. drawers ; * ; ironmongery comprising * ; fixed to floors ( ACCD) Cabinets E * x * x * high overall ; * nr. cupboard doors ; * ; ironmongery comprising * ; fixed to walls ( ACCD)

-

item

-

-

item

-

C

-

item

-

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/19

To C olle ction

$

STEEL AND METAL WORKS FURNITURE, FITTINGS, SHELVING, RACKS, PLAYGROUND EQUIPMENT, ETC. (Cont'd) Supplying and fixing external furniture and equipment ; hot-rolled steel to BS EN 10025 ; grade * ; galvanised ; including framing, fittings, fixing bolts, screws and ironmongery ; all necessary painting and coating ; as drawing nr. * Sitting benches A * x * x * high overall ; fixed to floors ( ACCD) Litter bins B * x * x * high overall ; fixed to floors ( ACCD) Supplying and fixing sign boards and signage ; aluminium ; colour anodised ; all necessary fixing screws, bolts, etc. ; as drawing nr. * Directional signs ; * thick aluminium plates C * x * ; * nr. * high painted letters ; * nr. * high painted symbols ; fixing to walls ( ACCD) Message signs ; comprising * ; * supporting frames or stands D * x * ; * nr. * high painted letters ; * nr. * high painted Chinese characters ; fixed to steel posts ( ACCD) Designing, supplying and fixing playground equipment ; * ; including framing, fittings, fixing bolts, screws and ironmongery ; all necessary painting and coating ; all in accordance with the manufacturer's instructions ; as drawing nr. * Table tennis tables E * x * x * high overall ; fixed to floors ; ref. * ( ACCD)

nr

nr

nr

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/20

To C olle ction

$

STEEL AND METAL WORKS FURNITURE, FITTINGS, SHELVING, RACKS, PLAYGROUND EQUIPMENT, ETC. (Cont'd) Basketball stands A * x * x * high overall ; fixed to floors ; ref. * ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/21

To C olle ction

$

STEEL AND METAL WORKS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.14/1 MODBQ.14/2 MODBQ.14/3 MODBQ.14/4 MODBQ.14/5 MODBQ.14/6 MODBQ.14/7 MODBQ.14/8 MODBQ.14/9 MODBQ.14/10 MODBQ.14/11 MODBQ.14/12 MODBQ.14/13 MODBQ.14/14 MODBQ.14/15 MODBQ.14/16 MODBQ.14/17 MODBQ.14/18 MODBQ.14/19 MODBQ.14/20 MODBQ.14/21 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.14 - STEEL AND METAL WORKS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.14/22

Bill Nr. MODBQ.15 PLASTERING AND PAVING INTERNALLY Spatterdash All surfaces of concrete A generally Lathing Wire netting to BS EN 10233-2 ; galvanised ; 50 minimum side and end laps ; measured net - allow for laps B walls and columns ( ACCD) m2 ( ACCD) m2

Plain expanded steel lathing ; galvanised ; 50 minimum side and end laps ; measured net - allow for laps C D walls and columns ceilings including sides and soffits of beams ( ACCD) m2

( ACCD)

m2

E

flush junctions between dissimilar solid backgrounds ; 300 wide ( ACCD) Plasterboard Lath or board * thick ; scrimmed and plastered joints ; finishing with * thick plaster skim coat

m

F G

walls and columns ceilings including sides and soffits of beams sloping soffits of staircases

( ACCD)

m2

( ACCD) ( ACCD)

m2 m2

H J

flewing soffits of staircases ; 3.50 - 5.00m above floor level ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/1

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Screeds ; one coat ; cement and sand (1:3) ; wood floated finish Walls and columns A * thick ; to receive ceramic tiling

( ACCD)

m2

B

* thick ; to receive glazed tiling ( ACCD) Ceilings including sides and soffits of beams

m2

C

* thick ; to receive glazed tiling ( ACCD) * thick ; to receive glazed tiling ; 3.50 - 5.00m above floor level ( ACCD) Floors

m2

D

m2

E

* thick ; to receive ceramic tiling

( ACCD)

m2

F

* thick ; to receive quarry tiling ( ACCD) * thick ; to receive terrazzo ( ACCD)

m2 m2 m2

G H

* thick ; to receive wood blocks ( ACCD) Treads and risers

J

* thick ; to receive terrazzo

( ACCD)

m2

All surfaces of fitments and the like K * thick ; to receive glazed tiling ( ACCD) Skirtings L * thick x * high ; to receive ceramic tiling * thick x * high ; to receive quarry tiling

m2

( ACCD)

m

M

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/2

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Wall strings A * thick x * (average) high ; to receive mosaic tiling ( ACCD) Curbs B * thick x * girth ; to receive ceramic tiling

m

( ACCD)

m

Extra over * floor screed * thick for C channels in floors or roofs ; rectangular ; * wide x * average deep ; to receive quarry tiling ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ; to receive terrazzo ( ACCD) filling to recessed manhole covers and the like * x * x * deep ; to receive terrazzo ( ACCD) Screeds ; one coat ; cement and sand (1:3) ; waterproof containing an approved waterproofing admixture mixed under the manufacturer's supervision in strict accordance with their instructions ; wood floated finish Walls and columns F * thick ; to receive glazed tiling ( ACCD) Floors G * thick ; to receive glazed tiling ( ACCD) Screeds ; one coat ; cement and sand (1:3) ; water repellant containing an approved water-reducing admixture and with a water/cement ratio of 0.45 ; wood floated finish Walls and columns H * thick ; to receive glazed tiling ( ACCD)

m

D

m

E

nr

m2

m2

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/3

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Floors A * thick ; to receive glazed tiling ( ACCD) Screeds ; cement and granite fines (1:3) ; wood floated finish Walls and columns B * thick ; to receive mosaic tiling ( ACCD) Ceilings including sides and soffits of beams C * thick ; to receive mosaic tiling ( ACCD) * thick ; to receive mosaic tiling ; 3.50 - 5.00m above floor level ( ACCD) Floors E * thick ; to receive mosaic tiling ( ACCD) Treads and risers F * thick ; to receive mosaic tiling ( ACCD) All surfaces of fitments and the like G * thick ; to receive mosaic tiling ( ACCD) Skirtings H * thick x * high ; to receive ceramic tiling

m2

m2

m2

D

m2

m2

m2

m2

( ACCD)

m

Extra over * floor screed * thick for J channels in floors or roofs ; rectangular ; * wide x * average deep ; to receive mosaic tiling ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ; to receive mosaic tiling ( ACCD)

m

K

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/4

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) A filling to recessed manhole covers and the like * x * wide x * deep ; to receive mosaic tiling ( ACCD) Screeds ; cement, sand and coarse aggregate (1:1.5:3) ; steel trowelled finish Floors B * thick ; to receive vinyl or linoleum

nr

( ACCD)

m2

Extra over * floor screed * thick for C filling to pipe trench covers * x * wide x * deep ; to receive vinyl or linoleum ( ACCD) filling to mat sinkings * x * x * deep ; to receive vinyl or linoleum ( ACCD) Cement rendering ; wood floated finish Walls and columns E * thick Floors F * thick ( ACCD) m2 ( ACCD) m2

m

D

nr

Cement rendering ; steel trowelled finish Walls and columns G * thick ( ACCD) m2

Ceilings including sides and soffits of beams H J * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Sloping soffits of staircases

m2

K L

* thick

( ACCD)

m2

* thick ; 3.50 - 5.00m above floor level ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/5

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Cement rendering ; waterproof containing an approved waterproofing admixture mixed under the manufacturer's supervision in strict accordance with their instructions ; steel trowelled finish Walls and columns A * thick Floors B * thick ( ACCD) m2 ( ACCD) m2

Cement rendering ; water repellant containing an approved water-reducing admixture and with a water/cement ratio of 0.45 ; steel trowelled finish Walls and columns C * thick Floors D * thick ( ACCD) m2 ( ACCD) m2

Internal lime plastering ; steel trowelled finish Walls and columns E F * thick * thick ; curved Walls and columns ; on lathing G H * thick * thick ; curved ( ACCD) ( ACCD) m2 m2 ( ACCD) ( ACCD) m2 m2

Ceilings including sides and soffits of beams J K * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level (AC) * thick ; 5.00 - 6.50m above floor level ( ACCD)

m2

L

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/6

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Sloping ceilings including sides and soffits of beams A B * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) * thick ; 5.00 - 6.50m above floor level ( ACCD) Sloping soffits of staircases

m2

C

m2

D E

* thick

( ACCD)

m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Gypsum plastering ; steel trowelled finish Walls and columns

m2

F G

* thick * thick ; curved Walls and columns ; on lathing

( ACCD) ( ACCD)

m2 m2

H J

* thick * thick ; curved Walls and columns ; on plasterboard

( ACCD) ( ACCD)

m2 m2

K

* thick

( ACCD)

m2

Ceilings including sides and soffits of beams L M * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) * thick ; 5.00 - 6.50m above floor level ( ACCD) Sloping ceilings including sides and soffits of beams

m2

N

m2

P

* thick

( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/7

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) A * thick ; 3.50 - 5.00m above floor level ( ACCD) * thick ; 5.00 - 6.50m above floor level ( ACCD) Sloping soffits of staircases C D * thick ( ACCD) m2

m2

B

m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Shanghai plastering ; steel trowelled finish Walls and columns

m2

E F

* thick * thick ; curved Walls and columns ; on lathing

( ACCD) ( ACCD)

m2 m2

G H

* thick * thick ; curved Walls and columns ; on plasterboard

( ACCD) ( ACCD)

m2 m2

J

* thick

( ACCD)

m2

Ceilings including sides and soffits of beams K L * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) * thick ; 5.00 - 6.50m above floor level ( ACCD) Sloping ceilings including sides and soffits of beams

m2

M

m2

N P

* thick

( ACCD)

m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) * thick ; 5.00 - 6.50m above floor level ( ACCD)

m2

Q

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/8

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Sloping soffits of staircases A B * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Granolithic Mix Type "A" ; steel trowelled finish Walls and columns

m2

C

* thick Floors

( ACCD)

m2

D

* thick Treads and risers

( ACCD)

m2

E

* thick

( ACCD)

m2

All surfaces of fitments and the like F * thick Skirtings G * thick x * high ; rounded top edge ; coved bottom edge at junction with paving Wall strings H * thick x * (average) high ; rounded top edge ; coved bottom edge at junction with paving ; stepped following profile of treads and risers ( ACCD) Open strings J * thick x * (average) high ; rounded top edge ; 15 x 20 return to soffit ; stepped following profile of treads and risers ( ACCD) Aprons K * x * to vertical edge of floor or landing ; 15 x 20 return to soffit ( ACCD) ( ACCD) m2

( ACCD)

m

m

m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/9

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Combined curbs and margins A 50 x 130 wide curb ; 25 x 50 wide margin ( ACCD) 50 x 130 wide curb ; to profile of treads and risers ; 25 x 50 wide margin to treads ; 20 x 50 wide margin to risers ( ACCD) Lining to channels C * thick ; * wide x * deep ( ACCD) m

m

B

m

Extra over * thick granolithic to floors for D channels ; rectangular ; * wide x * deep ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ( ACCD) filling to recessed manhole covers and the like * x * x * deep ( ACCD) Granolithic Mix Type "B" ; rubbed finish Walls and columns G * thick Floors H * thick Treads and risers J * thick ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

m

E

m

F

nr

All surfaces of fitments and the like K * thick Skirtings L * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/10

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Wall strings A * thick x * (average) high ; rounded top edge ; coved bottom edge at junction with paving ; stepped following profile of treads and risers ( ACCD) Open strings B * thick x * (average) high ; rounded top edge ; 15 x 20 return to soffit ; stepped following profile of treads and risers ( ACCD) Aprons C * x * to vertical edge of floor or landing ; 15 x 20 return to soffit ( ACCD) Combined curbs and margins D 50 x 130 wide curb ; 25 x 50 wide margin ( ACCD) 50 x 130 wide curb ; to profile of treads and risers ; 25 x 50 wide margin to treads ; 20 x 50 wide margin to risers ( ACCD) Lining to channels F * thick ; * wide x * deep ( ACCD) m

m

m

m

m

E

m

Extra over * thick granolithic to floors for G channels ; rectangular ; * wide x * deep ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ( ACCD) filling to recessed manhole covers and the like * x * x * deep ( ACCD) Granolithic Mix Type "C" ; rubbed finish Walls and columns K * thick ( ACCD) m2

m

H

m

J

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/11

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Floors A * thick Treads and risers B * thick ( ACCD) m2 ( ACCD) m2

All surfaces of fitments and the like C * thick Skirtings D * thick x * high ; rounded top edge ; coved bottom edge at junction with paving Wall strings E * thick x * (average) high ; rounded top edge ; coved bottom edge at junction with paving ; stepped following profile of treads and risers ( ACCD) Open strings F * thick x * (average) high ; rounded top edge ; 15 x 20 return to soffit ; stepped following profile of treads and risers ( ACCD) Aprons G * x * to vertical edge of floor or landing ; 15 x 20 return to soffit ( ACCD) Combined curbs and margins H 50 x 130 wide curb ; 25 x 50 wide margin ( ACCD) 50 x 130 wide curb ; to profile of treads and risers ; 25 x 50 wide margin to treads ; 20 x 50 wide margin to risers ( ACCD) Lining to channels K * thick ; * wide x * deep ( ACCD) m ( ACCD) m2

( ACCD)

m

m

m

m

m

J

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/12

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Extra over * thick granolithic to floors for A channels ; rectangular ; * wide x * deep ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ( ACCD) filling to recessed manhole covers and the like * x * x * deep ( ACCD) Terrazzo Mix Type "A" ; * colour ; ground smooth finish Floors D * thick Treads and risers E * thick Skirtings F * thick x * high ; rounded top edge ; coved bottom edge at junction with paving Wall strings G * thick x * (average) high ; rounded top edge ; coved bottom edge at junction with paving ; stepped following profile of treads and risers ( ACCD) Open strings H * thick x * (average) high ; rounded top edge ; 15 x 20 return to soffit ; stepped following profile of treads and risers ( ACCD) Aprons J * x * to vertical edge of floor or landing ; 15 x 20 return to soffit ( ACCD) ( ACCD) m2 ( ACCD) m2

m

B

m

C

nr

( ACCD)

m

m

m

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/13

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Combined curbs and margins A 50 x 130 wide curb ; 25 x 50 wide margin ( ACCD) 50 x 130 wide curb ; to profile of treads and risers ; 25 x 50 wide margin to treads ; 20 x 50 wide margin to risers ( ACCD) Lining to channels C * thick ; * wide x * deep ( ACCD) m

m

B

m

Extra over * thick terrazzo to floors for D channels ; rectangular ; * wide x * deep ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ( ACCD) filling to recessed manhole covers and the like * x * x * deep ( ACCD) Terrazzo Mix Type "A" ; * colour ; wax polished finish Walls and columns G * thick ( ACCD) m2

m

E

m

F

nr

All surfaces of fitments and the like H * thick ( ACCD) m2

Terrazzo Mix Type "B" ; * colour ; ground smooth finish Floors J * thick Treads and risers K * thick Skirtings L * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2 ( ACCD) m2

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/14

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Wall strings A * thick x * (average) high ; rounded top edge ; coved bottom edge at junction with paving ; stepped following profile of treads and risers ( ACCD) Open strings B * thick x * (average) high ; rounded top edge ; 15 x 20 return to soffit ; stepped following profile of treads and risers ( ACCD) Aprons C * x * to vertical edge of floor or landing ; 15 x 20 return to soffit ( ACCD) Combined curbs and margins D 50 x 130 wide curb ; 25 x 50 wide margin ( ACCD) 50 x 130 wide curb ; to profile of treads and risers ; 25 x 50 wide margin to treads ; 20 x 50 wide margin to risers ( ACCD) Lining to channels F * thick ; * wide x * deep ( ACCD) m

m

m

m

m

E

m

Extra over * thick terrazzo to floors for G channels ; rectangular ; * wide x * deep ( ACCD) filling to recessed duct covers and the like * x * wide x * deep ( ACCD) filling to recessed manhole covers and the like * x * x * deep ( ACCD) Terrazzo Mix Type "B" ; * colour ; wax polished finish Walls and columns K * thick ( ACCD) m2

m

H

m

J

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/15

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) All surfaces of fitments and the like A * thick ( ACCD) m2

Vitrified ceramic floor tiles ; * x * x * ; Messrs. * ; * series ; anti-slip ; * colour range Tiles ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in coloured cement B floors and pavings ; on * bedding ( ACCD) treads ; on * bedding risers ; on * bedding ( ACCD) ( ACCD)

m2 m2 m2

C D E

extra over tiles for rounded edge tiles ( ACCD) extra over tiles for tiles rounded on two edges ( ACCD) extra over tiles for special tiles ; ref. * ( ACCD) skirtings * high ; rounded top edge ; coved bottom edge at junction with paving ; on * bedding sides and bottom of channels * wide x * deep ; on * bedding filling to trench covers * x * wide ; joints to line with adjoining work

m

F

nr

G

nr

H

( ACCD)

m

J

( ACCD)

m

K

( ACCD)

m

L

filling to recessed manhole covers and the like * x * ; joints to line with adjoining work ( ACCD) Extra over ceramic tiles to floor for

nr

M

margins in contrasting colour ; * wide ( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/16

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Clay floor quarry tiles ; * x * x * ; anti-slip ; * colour Tiles ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in coloured cement A floors and pavings ; on * bedding ( ACCD) treads ; on * bedding risers ; on * bedding ( ACCD) ( ACCD)

m2 m2 m2

B C D

extra over tiles for rounded edge tiles ( ACCD) extra over tiles for tiles rounded on two edges ( ACCD) extra over tiles for special tiles ; ref. * ( ACCD) skirting * high ; rounded top edge ; coved bottom edge at junction with paving ; on * bedding ( ACCD) sides and bottom of channels * wide x * deep ; on * bedding filling to trench covers * x * wide ; joints to line with adjoining work

m

E

nr

F

nr

G

m

H

( ACCD)

m

J

( ACCD)

m

K

filling to recessed manhole covers and the like * x * ; joints to line with adjoining work ( ACCD) Extra over quarry tiles to floors for

nr

L

sunk bands in contrasting colour ; * wide x * deep ( ACCD) Glazed ceramic wall tiles ; * x * x * ; cushion edged ; * colour Tiles ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in coloured cement

m

M

walls and columns ; on * bedding ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/17

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) A ceilings including sides and soffits of beams ; on * bedding ( ACCD) ceilings including sides and soffits of beams ; on * bedding ; 3.50 - 5.00m above floor level ( ACCD) all surfaces of fitments and the like ; on * bedding ( ACCD) extra over tiles for rounded edge tiles ( ACCD) extra over tiles for tiles rounded on two edges ( ACCD) Unglazed vitreous mosaic tiles ; * x * x * ; Messrs. * ; * series ; * colour range Tiles ; bedding and jointing in cement and granite fines (1:3) bedding to the stated thickness ; pointing in coloured cement F floors and pavings ; on * bedding ( ACCD) treads ; on * bedding risers ; on * bedding ( ACCD) ( ACCD)

m2

B

m2

C

m2

D

m

E

nr

m2 m2 m2 m2

G H J K

walls and columns ; on * bedding ( ACCD) ceilings including sides and soffits of beams ; on * bedding ( ACCD) all surfaces of fitments and the like ; on * bedding ( ACCD) extra over tiles for rounded edge tiles ( ACCD) extra over tiles for external corner tiles

m2

L

m2

M

m

N

( ACCD)

m

P

extra over tiles for setting one row of tiles on splay at angles ( ACCD) skirtings * high ; square top edge ; coved bottom edge at junction with paving ; on * bedding ( ACCD)

m

Q

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/18

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) A skirtings * high ; square top edge ; splayed bottom edge at junction with paving ; on * bedding ( ACCD) wall strings * (average) high ; square top edge ; coved bottom edge ; stepped following profile of treads and risers ; on * bedding ( ACCD) wall strings * (average) high ; square top edge ; splayed bottom edge ; stepped following profile of treads and risers ; on * bedding ( ACCD) sides and bottom of channels * wide x * deep ; on * bedding filling to trench covers * x * wide ; joints to line with adjoining work

m

B

m

C

m

D

( ACCD)

m

E

( ACCD)

m

F

filling to recessed manhole covers and the like * x * ; joints to line with adjoining work ( ACCD) Extra over mosaic tiles to walls and columns for

nr

G

margins in contrasting colour ; * wide ( ACCD) Extra over mosaic tiles to floors for

m

H

margins in contrasting colour ; * wide ( ACCD) Vinyl floor tiles ; * x * x * ; Messrs. * ; * series ; * colour range ; emulsion polished finish ; laying and fixing in accordance with the manufacturer's instructions Sheets ; fixing with adhesive

m

J K L M

floors and pavings treads risers skirtings * high

( ACCD) ( ACCD) ( ACCD) ( ACCD)

m2 m2 m2 m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/19

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) A filling to pipe trench covers * wide ; joints to line with adjoining work ( ACCD) filling to manhole covers and the like * x * ; joints to line with adjoining work ( ACCD) Artificial turfing ; * x * x * ; laying and fixing in accordance with the manufacturer's instructions Sheets ; fixing with adhesive C floors and pavings ( ACCD) m2

m

B

nr

Line marking on sports pavings ; * proprietary marking systems ; * colour Lines D * wide Broken lines E * wide ( ACCD) m ( ACCD) m

Letters or figures on sports pavings ; * proprietary marking systems ; * colour Letters F * high Chinese characters G * high ( ACCD) nr ( ACCD) nr

Vitreous clay ; * x * x * non-slip nosing tiles Tiles ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in plain cement H to treads ; on * bedding ( ACCD) m

Tiles ; bedding and jointing in cement and granite fines (1:3) bedding to the stated thickness ; pointing in coloured cement J to treads ; on * bedding ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/20

To C olle ction

$

PLASTERING AND PAVING INTERNALLY (Cont'd) Sundries Treating surfaces of * with an approved liquid dust proofer ; in accordance with the manufacturer's instructions A walls and columns ( ACCD) m2

Treating surfaces of * with an approved liquid hardener ; in accordance with the manufacturer's instructions B floors ( ACCD) m2

Treating surfaces of * with carborundum grains ; sprinkling on and lightly trowelling in before setting at the rate of 2 kg/m2 C treads and risers ( ACCD) m2

Brass dividing strips ; bedding in screed D 3 x 50 ( ACCD) m

Brass dividing strips ; bedding in screed ; stepped to profile of treads and risers E * x * ( ACCD) m

Brass dividing strips ; bedding in wall finish F * x * ( ACCD) m

Non-slip inserts to treads ; rounded top edge ; bedding in groove G 15 x 25 EXTERNALLY Spatterdash All surfaces of concrete H generally ( ACCD) m2 ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/21

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Screeds ; one coat ; cement and granite fines (1:3) ; wood floated finish Walls and columns A * thick ; to receive mosaic tiling ( ACCD) Ceilings including sides and soffits of beams B * thick ; to receive mosaic tiling ( ACCD) * thick ; to receive mosaic tiling ; 3.50 - 5.00m above floor level ( ACCD) Floors D * thick ; to receive mosaic tiling ( ACCD) Treads and risers E * thick ; to receive mosaic tiling ( ACCD) Cills, copings, horizontal louvres, horizontal sunbreakers and the like F * thick ; to receive mosaic tiling ( ACCD) Vertical fins, vertical sunbreakers and the like G * thick ; to receive mosaic tiling ( ACCD) Small features and the like H * thick ; to receive mosaic tiling ( ACCD) Topping screeds ; on coat ; cement and sand (1:4) ; laid monolithically ; steel trowelled finish Roofs J * thick ; to receive asphalt ( ACCD) m2

m2

m2

C

m2

m2

m2

m2

m2

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/22

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Extra over * floor screed * thick for A channels in floors or roofs ; segmental ; * wide x * (average) deep ; to receive asphalt ( ACCD) Lightweight screeds ; one coat ; cement and lightweight aggregate (1:8) ; wood floated finish Roofs B * (average) thick ; to receive screed

m

( ACCD)

m2

Extra over * floor screed * thick for C channels in floors or roofs ; rectangular ; * wide x * (average) deep ; to receive screed ( ACCD) External rendering ; steel trowelled finish Walls and columns D * thick ( ACCD) m2

m

Ceilings including sides and soffits of beams E F * thick ( ACCD) m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Sloping soffits of staircases

m2

G H

* thick

( ACCD)

m2

* thick ; 3.50 - 5.00m above floor level ( ACCD) Cills, copings, horizontal louvres, horizontal sunbreakers and the like

m2

J

* thick

( ACCD)

m2

Vertical fins, vertical sunbreakers and the like K * thick ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/23

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Small features and the like A * thick ( ACCD) m2

Cement based premixed plastering ; all in accordance with the manufacturer's instructions Floors B * thick Treads and risers C * thick Skirtings D * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2 ( ACCD) m2

( ACCD)

m

Granolithic Mix Type "A" ; steel trowelled finish Walls and columns E * thick Floors F * thick Treads and risers G * thick Skirtings H * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

( ACCD)

m

Granolithic Mix Type "B" ; rubbed finish Walls and columns J * thick Floors K * thick ( ACCD) m2 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/24

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Treads and risers A * thick Skirtings B * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2

( ACCD)

m

Granolithic Mix Type "C" ; washed finish Walls and columns C * thick Floors D * thick Treads and risers E * thick Skirtings F * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

( ACCD)

m

Terrazzo Mix Type "A" ; * colour ; ground smooth finish Floors G * thick Treads and risers H * thick Skirtings J * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2 ( ACCD) m2

( ACCD)

m

Terrazzo Mix Type "B" ; * colour ; ground smooth finish Floors K * thick ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/25

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Treads and risers A * thick Skirtings B * thick x * high ; rounded top edge ; coved bottom edge at junction with paving ( ACCD) m2

( ACCD)

m

Clay floor quarry tiles ; * x * x * ; anti-slip ; * colour Tiles ; bedding and jointing in cement and sand (1:3) bedding to the stated thickness ; pointing in coloured cement C floors and pavings ; on * bedding ( ACCD) treads ; on * bedding risers ; on * bedding ( ACCD) ( ACCD)

m2 m2 m2

D E F

extra over tiles for rounded edge tiles ( ACCD) extra over tiles for tiles rounded on two edges ( ACCD) extra over tiles for special tiles ; ref. * ( ACCD) skirtings * high ; rounded top edge ; coved bottom edge at junction with paving ; on * bedding

m

G

nr

H

nr

J

( ACCD)

m

Glazed ceramic mosaic tiles ; * x * x * ; Messrs. * ; * series ; * colour range Tiles ; bedding and jointing in cement and granite fines (1:3) bedding to the stated thickness ; pointing in coloured cement K floors and pavings ; on * bedding ( ACCD) treads ; on * bedding risers ; on * bedding ( ACCD) ( ACCD)

m2 m2 m2 m2

L M N

walls and columns ; on * bedding ( ACCD)

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/26

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) A ceilings including sides and soffits of beams ; on * bedding ( ACCD) ceilings including sides and soffits of beams ; on * bedding ; 3.50 - 5.00m above floor level ( ACCD) cills, copings, horizontal louvres, horizontal sunbreakers and the like ; on * bedding ( ACCD) vertical fins, vertical sunbreakers and the like ; on * bedding ( ACCD) small features and the like ; on * bedding ( ACCD) extra over tiles for rounded edge tiles ( ACCD) extra over tiles for setting one row of tiles on splay at angles ( ACCD) extra over tiles for external corner tiles

m2

B

m2

C

m2

D

m2

E

m2

F

m

G

m

H

( ACCD)

m

Extra over tiles to walls and columns for J margins in contrasting colour ; * wide ( ACCD) Allow for testing of external wall tiling, remedying any defects and re-testing K infra-red thermographic scanning as General Specification for Building clause 18.108 ; by an approved specialist ( ACCD) Movement joints Forming joints in * finishes ; priming surfaces of joints ; pointing with polysulphide liquid polymer sealant L M * x * ; horizontal * x * ; vertical ( ACCD) ( ACCD) m m

m

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/27

To C olle ction

$

PLASTERING AND PAVING EXTERNALLY (Cont'd) Forming joints in concrete roofing tiles ; pointing with cold bitumen A * x * ; horizontal Sundries Treating surfaces of * with an approved liquid hardener ; in accordance with the manufacturer's instructions B floors ( ACCD) m2 ( ACCD) m

Treating surfaces of * with carborundum grains ; sprinkling on and lightly trowelling in before setting at the rate of 2 kg/m2 C treads and risers Polythene vapour barrier D on concrete beneath roof screed ; lap 150 at joints ; measured net allow for laps ( ACCD) Brass dividing strips ; bedding in wall finish E * x * ( ACCD) m ( ACCD) m2

m2

Non-slip inserts to treads ; rounded top edge ; bedding in groove F 15 x 25 ( ACCD) m

Cement and sand (1:3) ; surround to pipes above roof level G 150 x 150 x 150 Testing On site delivery checks ; provide all necessary calibrated equipment and carry out tests as General Specification for Building clause * on H non-slip homogeneous floor tiles ( ACCD) item ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/28

To C olle ction

$

PLASTERING AND PAVING C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.15/1 MODBQ.15/2 MODBQ.15/3 MODBQ.15/4 MODBQ.15/5 MODBQ.15/6 MODBQ.15/7 MODBQ.15/8 MODBQ.15/9 MODBQ.15/10 MODBQ.15/11 MODBQ.15/12 MODBQ.15/13 MODBQ.15/14 MODBQ.15/15 MODBQ.15/16 MODBQ.15/17 MODBQ.15/18 MODBQ.15/19 MODBQ.15/20 MODBQ.15/21 MODBQ.15/22 MODBQ.15/23 MODBQ.15/24 MODBQ.15/25 MODBQ.15/26 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... C.fwd $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/29

PLASTERING AND PAVING C O L L E C T I O N Page No. Page No. MODBQ.15/27 MODBQ.15/28 B.fwd ...................................... ...................................... $

Bill Nr. MODBQ.15 - PLASTERING AND PAVING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.15/30

Bill Nr. MODBQ.16 PLUMBING AND WATER SUPPLY SYSTEMS NOTE : A This Bill is to be read in conjuction with the relevant Preambles clauses under Mechanical Installation. In particular, the Contractor shall note that all painting on pipework and colour identification are deemed to be included in the rates of pipework. ( ACCD) SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; INTERNALLY UPVC rainwater pipes and fittings ; BS 5255 ; push-fit joints with rubber or neoprene seals ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns B * diameter ( ACCD) m

-

item

-

Pipes and fittings ; fixed to soffits C * diameter Extra over pipes for D E F G H J K L * shoes * bends * single branch junctions * double branch junctions socket adaptors on * pipes * drain adaptors access doors on * pipes cleaning eyes on * pipes ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr nr ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/1

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; INTERNALLY (Cont'd) UPVC soil and ventilating pipes and fittings ; BS 5255 ; solvent welded joints ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns A * diameter ( ACCD) m

Pipes and fittings ; fixed to soffits B * diameter Extra over pipes for C D E F G H J K * bends * bends with access door * single branch junctions * double branch junctions * boss connectors access doors on * pipes socket adaptors on * pipes * drain adaptors Roof and floor outlets and the like L * ; flat gratings ; chromium plated ; vertical spigots Traps M plastic traps as * ref. * ; "P" trap ; * seal ; * diameter ( ACCD) SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; EXTERNALLY UPVC rainwater pipes and fittings ; BS 5255 ; push-fit joints with rubber or neoprene seals ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns N * diameter ( ACCD) m ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr nr ( ACCD) m

( ACCD)

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/2

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; EXTERNALLY (Cont'd) Pipes and fittings ; fixed to soffits A * diameter Extra over pipes for B C D E F G H * shoes * bends * single branch junctions * double branch junctions access doors on * pipes socket adaptors on * pipes * drain adaptors Rainwater heads ; fixed to walls and columns J K * x * x * * diameter x * Aprons and cowls L * weathering aprons for asphalt roof ( ACCD) Roof and floor outlets and the like M * flat roof outlets ; domical gratings ; chromium plated ; vertical spigots ( ACCD) ( ACCD) nr nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr ( ACCD) m

nr

( ACCD)

nr

N

* flat roof side outlets ; flat gratings ; chromium plated ; horizontal spigots ( ACCD) * balcony outlets ; flat gratings ; chromium plated ; vertical spigots ( ACCD) Gratings to outlets and rainwater heads and the like

nr

P

nr

Q

wire balloon gratings for * pipes ; copper ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/3

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; EXTERNALLY (Cont'd) Traps A plastic traps as * ref. * ; "P" trap ; * seal ; * diameter ( ACCD) UPVC soil and ventilating pipes and fittings ; BS 5255 ; solvent welded joints ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns B * diameter ( ACCD) m

nr

Pipes and fittings ; fixed to soffits C * diameter Extra over pipes for D E F G H J K L * bends * bends with access door * single branch junctions * double branch junctions * boss connectors access doors on * pipes socket adaptors on * pipes * drain adaptors Heads ; fixed to walls and columns M N * x * x * * diameter x * Aprons and cowls P * weathering aprons for asphalt roof ( ACCD) * vent cowls ( ACCD) ( ACCD) ( ACCD) nr nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr nr ( ACCD) m

nr nr

Q

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/4

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SOIL, WASTE, VENTILATION AND RAINWATER PIPES ; EXTERNALLY (Cont'd) Gratings to outlets, heads, end of pipes and the like A wire balloon gratings for * pipes ; copper ( ACCD) GUTTERS ; EXTERNALLY Plastic eaves gutters and fittings ; BS 5255 ; push-fit joints with rubber or neoprene seals ; fixing with pipe brackets Half round gutters ; fixed to walls and columns B * diameter ; straight Extra over gutters for C D E F * angles * stopped ends * outlets * stopped end outlets SANITARY FITTINGS ; INTERNALLY Collecting from Government Logistics Department and FIXING ONLY Vitreous china wash basins G 560 x 405 ; taps ; waste fittings, plug and chain ; traps ; centre bracket and hangers ; painting ( ACCD) Fireclay sinks H 610 x 455 x 255 ; taps ; waste fittings, plug and chain ; traps ; cantilever brackets ; painting ( ACCD) Vitreous enamelled steel baths J 1700 x 700 x 380 ; taps ; waste fittings, plug and chain ; traps ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

nr

nr

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/5

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SANITARY FITTINGS ; INTERNALLY (Cont'd) Glazed ceramic shower tray A * x * ; waste fittings ; traps W.C. suites B vitreous china W.C. pans ; European ; horizontal outlets ; * litres vitreous china low level cisterns and fittings ; traps ; plastic W.C. seats and covers ( ACCD) Urinals C vitreous china urinal bowls ; concealed hangers ; spreaders ; outlets gratings ; waste fittings ( ACCD) vitreous china divisions ; concealed hangers ( ACCD) nr

nr

nr

D

( ACCD)

nr

E

cisterns ; syphons ; brackets ; petcocks ; * litres ( ACCD) Shower suites

nr

F

chromium plated shower fittings ; type "*" ; exposed riser pipes ( ACCD) chromium plated shower fittings ; type "*" ; concealed riser pipes ( ACCD) Macerators

nr

G

nr

H

* x * x * Ancillaries

( ACCD)

nr

J

chromium plated combined waste and overflow fittings ; plug, chain and stay ; * diameter ( ACCD) chromium plated pillar taps ; self closing ; cold ; * diameter ( ACCD) chromium plated bib taps ; screw down ; cold ; * diameter ( ACCD) plastic bottle traps ; "S" trap ; * diameter ( ACCD)

nr

K

nr

L

nr

M

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/6

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SANITARY FITTINGS ; INTERNALLY (Cont'd) Toilet fittings A chromium plated toilet roll holders

( ACCD)

nr

B

chromium plated towel rails ; * diameter ; * long ( ACCD) chromium plated washing cream dispensers

nr

C

( ACCD)

nr

D

chromium plated shelf guard rails ; 535 x 125 ( ACCD) chromium plated robe hooks ; single Supplying and fixing ; * Vitreous china wash basins as * ; self rimming

nr

E

( ACCD)

nr

F G

* x * ; ref. * ; *

( ACCD)

nr

painted concealed brackets ; ref. * ( ACCD) Fireclay sinks as * ; bucket grating

nr

H

* x * x * ; *

( ACCD)

nr

Vitreous enamelled steel baths as * ; side panel ; slip resistant pad J * x * x * ; * W.C. suites K vitreous china W.C. pans as * ref. * ; European ; pedestal type ; vertical outlets ( ACCD) vitreous china W.C. pans as * ref. * ; Asiatic ; squatting treads ; vertical outlets ( ACCD) vitreous china cisterns and fittings as * ref. * ; low level ; * litres ; valveless syphonic fittings ; overflow ; brackets ; plastic flush pipes ( ACCD) ( ACCD) nr

nr

L

nr

M

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/7

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SANITARY FITTINGS ; INTERNALLY (Cont'd) A plastic W.C. seats with cover ; black ; gap front ( ACCD) Urinals B vitreous china wall type urinal bowls as * ref. * ; concealed hangers ; spreaders ; outlet gratings ; waste fittings ( ACCD) vitreous china urinal stalls as * ref. * ; L-shaped on plan ; in single range ; spreaders ; outlet gratings ; waste fittings ; * long x * high ( ACCD) vitreous china divisions as * ref. * ; * x * ; concealed hangers ( ACCD) vitreous china automatic flushing cisterns ; syphons ; chromium plated petcocks as * ref. * ; * litres ( ACCD) chromium plated flush pipes ; exposed ; to suit range of * urinals

nr

nr

C

nr

D

nr

E

nr

F

( ACCD)

nr

G

enamelled fireclay raised floor treads ; * wide x * high ; black vitreous non-slip tiles ( ACCD) Chromium plated shower fittings

m

H

shower suites as * ref. * ; swivel heads with adjustable spray ; hot and cold mixer taps ; concealed riser pipes ( ACCD) Stainless steel sinks ; satin finish ; single bowl ; single drainer ; back skirting ; overflow ; plug, chain and stay ; brackets

nr

J

* x * Ancillaries

( ACCD)

nr

K

chromium plated waste fittings as * ref. * ; plug and chain ; 32 diameter ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/8

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SANITARY FITTINGS ; INTERNALLY (Cont'd) A chromium plated pop up waste fittings as * ref. * ; plug and chain ; 32 diameter ( ACCD) chromium plated pillar taps as * ref. * ; screw down ; 13 diameter ( ACCD) chromium plated bib taps as * ref. * ; screw down ; 13 diameter ( ACCD) chromium plated mixer taps as * ref. * ; screw down ; 13 diameter ( ACCD) plastic bottle traps as * ref. * ; "P" trap ; * seal ; * diameter ( ACCD) plastic traps as * ref. * ; "S" trap ; * seal ; * diameter ( ACCD) plastic bath traps with combined flexible overflow as * ref. * ; "P" trap ; * seal ; * diameter ( ACCD) Toilet fittings H chromium plated toilet roll holders as * ref. *

nr

B

nr

C

nr

D

nr

E

nr

F

nr

G

nr

( ACCD)

nr

J

enamelled soap dishes as * ref. * ( ACCD) chromium plated tumbler and toothpaste holders as * ref. * ( ACCD) chromium plated washing cream dispensers as * ref. * COLD WATER ; INTERNALLY Copper pipes ; BS EN 1057 ; fittings ; compression joints ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns

nr

K

nr

L

( ACCD)

nr

M

* outside diameter

( ACCD)

m

Pipes and fittings ; fixed to soffits N * outside diameter ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/9

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS COLD WATER ; INTERNALLY (Cont'd) Pipes and fittings ; laid in chases A * outside diameter ( ACCD) m

Pipes and fittings ; embedded in screeds B * outside diameter Extra over pipes for C D E F G H * bends * reducing bends * tees * reducing tees * caps * plugs ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr ( ACCD) m

Stainless steel pipes ; BS EN 10312 ; fittings ; joints in accordance with the manufacturer's instructions ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns J * diameter ( ACCD) m

Pipes and fittings ; fixed to soffits K * diameter Pipes and fittings ; laid in chases L * diameter ( ACCD) m ( ACCD) m

Pipes and fittings ; embedded in screeds M * diameter Extra over pipes for N P Q R * bends * reducing bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/10

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS COLD WATER ; INTERNALLY (Cont'd) A B * caps * plugs ( ACCD) ( ACCD) nr nr

Special joints and connections ; brass fittings ; joints to copper pipes Flanged tank connectors ; bedding in mastic C to suit * diameter pipes ; fixed to side of reinforced concrete tank * thick ( ACCD) High pressure brass valves ; joints to copper pipes Drain valves D * diameter Stop valves E * diameter ( ACCD) nr ( ACCD) nr

nr

High pressure bronze valves ; joints to copper pipes Gate valves F * diameter Check valves G * diameter Ball float valves ; copper floats H * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr

High pressure cast iron valves ; joints to copper pipes Gate valves J * diameter Check valves K * diameter ( ACCD) nr ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/11

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS COLD WATER ; INTERNALLY (Cont'd) Ball float valves ; copper floats A * diameter ( ACCD) nr

Collecting from Government Logistics Department and FIXING ONLY Cisterns ; galvanised steel B * x * x * ; capacity * litres ( ACCD) nr

Covers and frames ; bedding and haunching frame in cement mortar ; sealing covers in grease C * x * clear opening ; weighing approximately * kg Cisterns and cylinders Cisterns and covers ; galvanised steel ; hand holes D * x * x * ; capacity * litres HOT WATER ; INTERNALLY Copper pipes ; BS EN 1057 ; fittings ; compression joints ; fixing with pipe brackets Pipes and fittings ; fixed to walls and columns E * outside diameter ( ACCD) m ( ACCD) nr

( ACCD)

nr

Pipes and fittings ; fixed to soffits F * outside diameter Pipes and fittings ; laid in chases G * outside diameter ( ACCD) m ( ACCD) m

Pipes and fittings ; embedded in in-situ concrete H * outside diameter ( ACCD) m

Pipes and fittings ; embedded in screeds J * outside diameter ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/12

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS HOT WATER ; INTERNALLY (Cont'd) Extra over pipes for A B C D E F * bends * reducing bends * tees * reducing tees * caps * plugs ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr

Medium pressure brass valves ; joints to copper pipes Drain valves G * diameter Stop valves H * diameter ( ACCD) nr ( ACCD) nr

Medium pressure bronze valves ; joints to copper pipes Gate valves J * diameter Cisterns and cylinders Cylinders ; galvanised steel ; side entry immersion heater K * diameter x * high ; capacity * litres ( ACCD) Insulation ; * ; * thick ; fixing with bands ; externally to Pipes and fittings ; copper L * diameter ( ACCD) m ( ACCD) nr

nr

Insulation ; * x * ; fixing with bands ; externally to Extra over pipes for M * bends ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/13

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS HOT WATER ; INTERNALLY (Cont'd) A B C * reducing bends * tees * reducing tees Gate valves D * diameter ( ACCD) nr ( ACCD) ( ACCD) ( ACCD) nr nr nr

Insulation ; * ; * thick ; externally to Cylinders ; hot face temperature * degrees E * diameter x * FLUSHING WATER ; INTERNALLY UPVC pipes ; ISO 4422 Part 1 and 2 ; fittings ; solvent welded joints ; fixing with holderbats brackets or pipe clips Pipes and fittings ; fixed to walls and columns F * diameter ( ACCD) m ( ACCD) nr

Pipes and fittings ; fixed to soffits G * diameter Pipes and fittings ; laid in chases H * diameter Extra over pipes for J K L M * bends * reducing bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m ( ACCD) m

Special joints and connections ; gunmetal fittings ; joints to plastic pipes Flanged tank connectors ; backnuts and washers ; bedding in mastic N to suit * diameter pipes ; fixed to side of cistern ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/14

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS FLUSHING WATER ; INTERNALLY (Cont'd) High pressure PVC valves ; joints to plastic pipes Diaphragm or ball type drain valves A * diameter Diaphragm or ball type stop valves B * diameter ( ACCD) nr ( ACCD) nr

High pressure bronze valves ; joints to plastic pipes Gate valves C * diameter Check valves D * diameter Ball valves ; plastic floats E * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr

High pressure cast iron valves ; joints to plastic pipes Ball valves ; epoxy coated copper floats F * diameter ( ACCD) nr

Collecting from Government Logistics Department and FIXING ONLY Cisterns ; galvanised steel G * x * x * ; capacity * litres ( ACCD) nr

Covers and frames ; bedding and haunching frame in cement mortar ; sealing covers in grease H * x * clear opening ; weighing approximately * kg

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/15

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS

COLD WATER FOR FIRE FIGHTING ; INTERNALLY Galvanised steel pipes ; BS EN 10255 ; medium grade ; fittings ; screwed joints ; fixing with holderbats brackets or pipe clips Pipes and fittings ; fixed to walls and columns A * diameter ( ACCD) m

Pipes and fittings ; fixed to soffits B * diameter Extra over pipes for C D E F * bends * reducing bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

Special joints and connections ; brass fittings ; joints to galvanised steel pipes Flanged tank connectors ; bedding in mastic G to suit * diameter pipes ; fixed to side of reinforced concrete tank * thick ( ACCD) High pressure cast iron valves ; joints to galvanised steel Gate valves H * diameter Check valves J * diameter Ball float valves ; copper floats K * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/16

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS COLD WATER FOR FIRE FIGHTING ; INTERNALLY (Cont'd) Collecting from Government Logistics Department and FIXING ONLY Covers and frames ; bedding and haunching frame in cement mortar ; sealing covers in grease A * x * clear opening ; weighing approximately * kg

( ACCD)

nr

SUNDRIES - INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole of Plumbing and Water Supply Systems Allow for B marking the positions of holes, mortices, chases and the like in the structure ( ACCD) testing the complete Plumbing and Water Supply Systems all in accordance with General Specification for Plumbing and Drainage Installation ; remedying any defects ; re-testing as necessary ( ACCD) providing * copies of 'as-fitted' drawings of all Installations ; marking on pipe sizes, valve positions, draw off points, pressure valve positions and settings and any other relevant information ( ACCD) supplying and fixing pipes sleeves and packing for pipes passing through walls or floors in accordance with General Specification for Plumbing and Drainage Installation clause B2.6.1 ( ACCD)

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/17

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS SUNDRIES - INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A supplying and fixing pipes sleeves and packing for pipes passing through fire rated walls or floors in accordance with General Specification for Plumbing and Drainage Installation clause B2.6.2 ( ACCD) supplying and fixing pipes sleeves and packing for pipes passing through external basement walls in accordance with General Specification for Plumbing and Drainage Installation clauses B2.6.3 and B2.6.4 ( ACCD) supplying and fixing pipes sleeves and packing for pipes passing through flat roofs in accordance with General Specification for Plumbing and Drainage Installation clause B2.6.5 ( ACCD) supplying and fixing fire stopping or fire collars ; as * for plastic pipes passing through fire rated walls and floors to achieve * hour fire resistance rating ( ACCD) supplying and fixing fire stopping or fire collars ; as * for plastic pipes passing through fire rated walls and floors * ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/18

To C olle ction

$

PLUMBING AND WATER SUPPLY SYSTEMS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.16/1 MODBQ.16/2 MODBQ.16/3 MODBQ.16/4 MODBQ.16/5 MODBQ.16/6 MODBQ.16/7 MODBQ.16/8 MODBQ.16/9 MODBQ.16/10 MODBQ.16/11 MODBQ.16/12 MODBQ.16/13 MODBQ.16/14 MODBQ.16/15 MODBQ.16/16 MODBQ.16/17 MODBQ.16/18 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.16 - PLUMBING AND WATER SUPPLY SYSTEMS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.16/19

Bill Nr. MODBQ.17 GLAZING GENERAL GLAZING (INCLUDING ACRYLIC AND POLYCARBONATE SHEETS) Clear sheet glass * thick ; to wood with sprigs and linseed oil putty ; front and back bedded A B C panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

* thick ; to wood with wood beads or mouldings and plastic glazing strips or the like D E F panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

* thick ; to metal with metal beads or mouldings and approved proprietary brand non-setting compound G H J panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 Clear float glass * thick ; to wood with wood beads or mouldings and plastic glazing strips or the like K L M panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.17/1

To C olle ction

$

GLAZING GENERAL GLAZING (INCLUDING ACRYLIC AND POLYCARBONATE SHEETS) (Cont'd) * thick ; to metal with metal beads or mouldings and approved proprietary brand non-setting compound A B C panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 * thick ; to * D louvres * wide ; * finish to edges (In Nr. O) ( ACCD) Cast glass * thick ; to wood with wood beads or mouldings and plastic glazing strips or the like E F G panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

m

* thick ; to metal with wood beads or mouldings and approved proprietary brand non-setting compound H J K L panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 grinding ; surfaces of glass, partly obscured ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

( ACCD)

m2

M

sandblasting ; surfaces of bent glass ( ACCD) embrossing ; surfaces of glass ; * x * ; symbols ; as drawing nr. * ( ACCD) engraving ; surfaces of glass ; * x * ; Chinese characters ; as drawing nr. * ( ACCD) polishing ; plain edges of glass ( ACCD)

m2

N

nr

P

nr m

Q

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.17/2

To C olle ction

$

GLAZING GENERAL GLAZING (INCLUDING ACRYLIC AND POLYCARBONATE SHEETS) (Cont'd) Wired polished glass * thick ; to metal with metal beads or mouldings and approved proprietary brand non-setting compound A B C panes not exceeding 0.15 m2 panes 0.15 - 4.00 m2 panes exceeding 4.00 m2 ( ACCD) ( ACCD) ( ACCD) m2 m2 m2

GLASS WALL LININGS, FLOORS, BALUSTRADES AND PARAPETS Clear float glass ; fully tempered Squash court armoured glass wall system ; * thick ; including all necessary mullions, fixings, framings, neoprene strips, sealant pointing, cement and sand packing and ironmongery to doors ; fixing strictly in accordance with the manufacturer's instructions ; as drawing nr. * D approximate overall size * x * high ; with * nr. doors ; * x * high ( ACCD) Mirror wall linings ; * thick ; mitres at corners ; plugging and screwing to walls ; sealing joints with approved sealant E in panels ; * girth x * high (overall)

-

item

-

( ACCD)

m2

Glass balustrades ; * thick ; galvanised steel to BS EN 10025 grade * fixing trough at bottom, all supporting metalwork, structural sealant joints and rounded edges at exposed edges F * (overall) high ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.17/3

To C olle ction

$

GLAZING

MIRRORS, GLASS SHELVES AND SUNDRY GLAZING WORKS Clear float glass * thick ; placing on and including shelf brackets and supports ; with * chromium plated brass dome headed screws and rubber washers A shelves ; 150 x 600 ; bevelling edges ( ACCD) Selected clear float glass ; silvering and protecting with undercoat paint * thick ; to walls ; with * chromium plated brass dome headed screws and rubber washers B mirrors ; 450 x 450 ; bevelling edges ( ACCD) mirrors ; 600 x 600 ; square edges ( ACCD) Domelights ; ref. * Type * ; * shape ; * thick wired cast glass D overall size ; * x * ; fixing with * ; to concrete curbs ( ACCD)

nr

nr

C

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.17/4

To C olle ction

$

GLAZING C O L L E C T I O N Page No. Page No. Page No. Page No. MODBQ.17/1 MODBQ.17/2 MODBQ.17/3 MODBQ.17/4 ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.17 - GLAZING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.17/5

Bill Nr. MODBQ.18 PAINTING PAINTING Applying two coats of cement paint ; on Concrete walls and columns A over 300 girth ( ACCD) m2

Fair faced concrete walls and columns B over 300 girth Rendered walls and columns C over 300 girth Concrete ceilings and beams D E over 300 girth over 300 girth ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

Fair faced concrete ceilings and beams F G over 300 girth over 300 girth ; 3.50 - 5.00m above floor level Rendered ceilings and beams H J over 300 girth over 300 girth ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

( ACCD)

m2

Applying one coat water based lime resistant primer and two full coats of emulsion paint ; on Fair faced concrete walls and columns K over 300 girth Plastered walls and columns L over 300 girth ( ACCD) m2 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/1

To C olle ction

$

PAINTING PAINTING (Cont'd) Fair faced concrete ceilings and beams A B over 300 girth over 300 girth ; 3.50 - 5.00m above floor level Plastered ceilings and beams C D over 300 girth over 300 girth ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

( ACCD)

m2

Applying painting system Type A as General Specification for Building Table 15.7 ; on structural steel General surfaces E F over 300 girth not exceeding 300 girth Members of roof trusses and lattice steelwork G H over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m ( ACCD) ( ACCD) m2 m

Applying rust inhibitor, one coat primer only ; on metal ; before fixing General surfaces J K over 300 girth not exceeding 300 girth Individual members of balustrades, fencing, railings and the like L M over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m ( ACCD) ( ACCD) m2 m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/2

To C olle ction

$

PAINTING PAINTING (Cont'd) Applying rust inhibitor, one coat primer, two undercoats and one finishing coat of synthetic paint ; on metal General surfaces A B over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall C over 300 girth Individual members of balustrades, fencing, railings and the like D E over 300 girth not exceeding 300 girth Pipes and conduits F G H not exceeding 50 diameter 50 - 100 diameter * diameter ( ACCD) ( ACCD) ( ACCD) m m m ( ACCD) ( ACCD) m2 m ( ACCD) m2

Applying one coat primer, two undercoats and one finishing coat of synthetic paint ; on galvanised metal General surfaces J K over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall L over 300 girth Individual members of balustrades, fencing, railings and the like M N over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/3

To C olle ction

$

PAINTING PAINTING (Cont'd) Pipes and conduits A B C not exceeding 50 diameter 50 - 100 diameter * diameter ( ACCD) ( ACCD) ( ACCD) m m m

Applying rust inhibitor, two coats of black bitumastic paint ; on metal ; before fixing Eaves gutters ; inside and out D * diameter ( ACCD) m

Applying one coat solution of acetone/benzole, one coat primer, two undercoats and one finishing coat of synthetic paint ; on copper Pipes and conduits E F G not exceeding 50 diameter 50 - 100 diameter * diameter ( ACCD) ( ACCD) ( ACCD) m m m

Applying one coat primer, two undercoats and one finishing coat of synthetic paint ; on plastic Pipes and conduits H J K not exceeding 50 diameter 50 - 100 diameter * diameter ( ACCD) ( ACCD) ( ACCD) m m m

Applying knotting, two coats of black bitumastic paint ; on coated cast iron Pipes and conduits L M 50 - 100 diameter * diameter ( ACCD) ( ACCD) m m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/4

To C olle ction

$

PAINTING PAINTING (Cont'd) Applying two coats wood preservative ; on wood ; before fixing General surfaces A B over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Knotting ; applying one coat primer, stopping, painting one undercoat and one finishing coat of synthetic paint ; on wood General surfaces C D over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall E over 300 girth ( ACCD) m2

Knotting ; applying one coat primer, stopping, painting two undercoats and one finishing coat of synthetic paint ; on wood General surfaces F G over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall H over 300 girth ( ACCD) m2

Applying two coats of varnish ; on wood General surfaces J K over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall L over 300 girth ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/5

To C olle ction

$

PAINTING PAINTING (Cont'd) Staining to approval ; applying two coats of varnish ; on wood General surfaces A B over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Windows, glazed screens and glazed doors ; both sides measured flat overall C over 300 girth PAINTING ; EXTERNALLY Applying two coats of external textured paint ; on Concrete walls and columns D over 300 girth ( ACCD) m2 ( ACCD) m2

Fair faced concrete walls and columns E over 300 girth Rendered walls and columns F over 300 girth Concrete ceilings and beams G H over 300 girth over 300 girth ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

Fair faced concrete ceilings and beams J K over 300 girth over 300 girth ; 3.50 - 5.00m above floor level Rendered ceilings and beams L M over 300 girth over 300 girth ; 3.50 - 5.00m above floor level ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/6

To C olle ction

$

PAINTING PAINTING ; EXTERNALLY (Cont'd) Applying one coat water based lime resistant primer and two full coats of emulsion paint ; on Fair faced concrete walls and columns A over 300 girth Plastered walls and columns B over 300 girth ( ACCD) m2 ( ACCD) m2

Fair faced concrete ceilings and beams C D over 300 girth over 300 girth ; 3.50 - 5.00m above floor level Plastered ceilings and beams E F over 300 girth over 300 girth ; 3.50 - 5.00m above floor level POLISHING OR CLEAR FINISHING Twice wax polishing ; on wood Floors G over 300 girth Three times wax polishing ; on wood General surfaces H J over 300 girth ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

( ACCD)

m2

( ACCD)

m2

isolated surfaces not exceeding 300 girth ( ACCD) Windows, glazed screens and glazed doors ; both sides measured flat overall

m

K

over 300 girth

( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/7

To C olle ction

$

PAINTING

POLISHING OR CLEAR FINISHING ; EXTERNALLY Bodying in and french polishing General surfaces A B over 300 girth ( ACCD) m2

isolated surfaces not exceeding 300 girth ( ACCD) SIGNWRITING ; EXTERNALLY Marking out ; applying thick coat synthetic paint ; on concrete Lines

m

C

* wide ; straight Marking out ; applying thick coat synthetic paint ; on plaster Letters ; plain

( ACCD)

m

D

* high Numerals ; plain

( ACCD)

nr

E

* high Chinese characters ; plain

( ACCD)

nr

F

* high Stops and punctuation marks ; plain

( ACCD)

nr

G

* high PAPER HANGING

( ACCD)

nr

Wall paper ; Messrs. * ; Pattern ref. * ; fixing with adhesive recommended by the wall paper manufacturer Papering H plastered walls and columns Border strips J Pattern ref. * ( ACCD) m ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/8

To C olle ction

$

PAINTING

WORK TO EXISTING SURFACES ; EXTERNALLY Cleaning with proprietary chemical solution ; in accordance with the manufacturer's instructions Stonework A walls and columns ( ACCD) m2

Scrubbing with scouring powder ; rubbing down ; rinsing Rubbed granolithic B floors ( ACCD) m2

Cleaning with solution of detergent and disinfectant Synthetic paint C general surfaces ( ACCD) m2

Scraping ; brooming down ; stopping ; bringing forward bare spots with new material ; applying * Concrete walls and columns D over 300 girth ( ACCD) m2

Washing down ; scraping ; wire brushing ; rubbing down ; bringing forward bare spots with rust inhibitor, primer and undercoat ; applying * General surfaces E over 300 girth TESTING On site delivery checks Carry out tests as General Specification for Building clause * on F emulsion paint ( ACCD) item ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/9

To C olle ction

$

PAINTING C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.18/1 MODBQ.18/2 MODBQ.18/3 MODBQ.18/4 MODBQ.18/5 MODBQ.18/6 MODBQ.18/7 MODBQ.18/8 MODBQ.18/9 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.18 - PAINTING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.18/10

Bill Nr. MODBQ.19 LANDSCAPING TURFING AND GRASS SEEDING Soiling, turfing and seeding Topsoil ; imported A * average thick ; in general areas ; spreading and levelling ( ACCD) Lightweight Soil Mix ; imported B * average thick ; in general areas ; spreading and levelling ( ACCD) Spot turfing ; fertilizer at dressing with Mix ; cutting C * ; applying pre-turfing the rate of * g/m2 ; top Topsoil or Fabricated Soil and rolling ( ACCD) m2

m2

m2

in general areas

Close turfing ; laying turves previously cut and stored on site ; applying pre-turfing fertilizer at the rate of * g/m2 ; fixing with pegs at * centres both ways ; top dressing with Topsoil or Fabricated Soil Mix ; cutting and rolling D on level or to slopes not exceeding 1 in 7

( ACCD)

m2

Raking surfaces to a fine tilth ; applying pre-seeding fertilizer at the rate of * g/m2 ; broadcast * at the rate of * g/m2 ; mulching ; covering seeds by lightly working into surface E in general areas Sundries F * edging to grassed areas ; * x * ( ACCD) ( ACCD) m2

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/1

To C olle ction

$

LANDSCAPING TURFING AND GRASS SEEDING (Cont'd) Hydroseeding ; carried out by Specialist sub-contractor on the "List of Approved Suppliers of Materials and Specialist Contractors" under the category of "Landscaping - Hydroseeding (Class II)" Scarifying surfaces to a rough textured finish ; hydroseeding a blend of mulch at the rate of 200 g/m2, seed mix at the rate of 35 g/m2, pre-seeding fertilizer at the rate of 100 g/m2, soil binding agent at the rate of 25 g/m2 and dye at the rate of 0.5 - 0.05 g/m2 ; applying post-seeding fertilizer at the rate of * g/m2 ; protecting sprayed hydroseeded surfaces with protective layer ; spiking or stapling in position A in general areas PLANTING Cultivating Weeding * B in general areas Scarifying surfaces C in general areas Surfaces applications Applying herbicide at the rate of * kg/m2 D in general areas ( ACCD) m2 ( ACCD) m2 ( ACCD) m2 ( ACCD) m2

Applying selected weedkillers at the rate of * kg/m2 E in general areas ( ACCD) m2

Applying soil conditioner at the rate of * m3/m2 F in general areas ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/2

To C olle ction

$

LANDSCAPING PLANTING (Cont'd) Supplying only ; plant specimens ; planting measured separately Seedling trees A * ; 150 - 900 high Light standard trees B * ; 900 - 2000 high Heavy standard trees C * ; over 6000 high ; * stem diameter at * m above root collar ( ACCD) Small shrubs D * ; 150 - 300 high Large shrubs E * ; 300 - 450 high Bamboos F * ; * - * high ; * nr. shoots Small palms G * ; 450 - 600 high Conifers H * ; * - * high ; root ball not less than * diameter and * in depth Aquatic plants J * ; * ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr

nr

( ACCD)

nr

Decorative cut trees in pots or containers ; * ; as drawing nr. * K * ; * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/3

To C olle ction

$

LANDSCAPING PLANTING (Cont'd) Planting only ; plant specimens ; in existing cultivated or grassed areas ; supplying measured separately Preparing ground ; notch planting ; * nr. * x * x * steel angle stakes * m long treated with one coat primer and one coat of approved paint ; plastic coated wire ties A light standard trees approximate * m high and * m spread ( ACCD) Preparing ground ; pit planting ; * nr. * x * x * galvanised steel guying stakes * m long treated with one coat primer and one coat of approved paint ; plastic coated wire guys ; root barrier around tree pits B heavy standard trees approximate * m high and * m spread ( ACCD) Collecting from * and transplanting ; including provision of temporary storage ; in cultivated or grassed areas prepared by others Preparing ground ; * ; trunking protection ; watering C semi-mature trees approximate * m high and * m spread ( ACCD) Boulders Supplying and placing local boulders of * type ; size * x * x * high D fixing in position ; wedging with small rocks ; partially sunk below ground ( ACCD) Supplying and placing Yellow Soap Stone of * colour ; * E fixing in position ; wedging with small rocks ; partially sunk below ground ; concrete base and haunching ( ACCD)

nr

nr

nr

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/4

To C olle ction

$

LANDSCAPING PLANTING (Cont'd) Selecting from boulders on site and placing ; size * x * x * high A fixing in position ; wedging with small rocks ; partially sunk below ground ; concrete base and haunching ( ACCD) Drainage layer Drainage aggregate ; 25 - 50 diameter ; in planter boxes B spreading and levelling ; * thick ( ACCD) Gravel ; 10 - 30 diameter ; * C spreading and levelling ; * thick ( ACCD) Geotextile filter fabric ; as General Specification for Building Table 25.1 type * ; lapped at joints ; in planter boxes D single layer ; measured net ; allow for laps Sundries Supplying and fixing artificial plants ; * ; filling pots with * ; backfilling with * thick aggregate ; supporting, securing and protecting E * Mulching ; * ; to planted areas F * deep ( ACCD) m2 ( ACCD) nr

nr

m2

m2

( ACCD)

m2

Protective bamboo fencing ; vertical metal stakes treated with one coat primer and one coat of approved paint ; 10 - 20 diameter bamboo palings at 150 centres G * high ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/5

To C olle ction

$

LANDSCAPING PLANTING (Cont'd) Plant labels ; 100 x 50 x 2 white acrylic labels ; with botanical and Chinese name in heat embossed black lettering A holed and secured to plant with nylon rope ( ACCD) Safety precautions in Tree Works ; allowing for all safety precautions in tree works ; all as described in the General Specification for Building B generally Establishment Works Allowing for the maintenance of the Landscape Works ; all as described in the General Specification for Building C for a period of twelve months ( ACCD) item (ACCD) item -

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/6

To C olle ction

$

LANDSCAPING C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.19/1 MODBQ.19/2 MODBQ.19/3 MODBQ.19/4 MODBQ.19/5 MODBQ.19/6 ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.19 - LANDSCAPING To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.19/7

Bill Nr. MODBQ.20 EXTERNAL WORKS SITE PREPARATION Site clearance Clearing the site A removing off site or burning all rubbish, tall grass, shrubs, bushes and the like and trees not exceeding 600 girth, including grubbing up roots ( ACCD) Cutting down trees ; not in open area B * to * girth ; grubbing up roots and removing off site or burning ( ACCD) Stripping top soil for preservation C average * deep ; depositing in separate spoil heaps ; spreading average *m from excavation ( ACCD) Demolishing or taking down to ground level All structures D on the site ; shoring and scaffolding Individual structures E * x * x * high ; * storeys ; reinforced concrete framed building ; located at * ; shoring and scaffolding ( ACCD) Chain link fencing F * high ; located at * ; grubbing up bases ; making good pavings ( ACCD) Allowing credit for the value of materials G arising from demolition ( ACCD) item -

-

item

-

nr

m2

( ACCD)

-

item

-

-

item

-

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/1

To C olle ction

$

EXTERNAL WORKS SITE PREPARATION (Cont'd) Taking over ; altering when required ; maintaining for the duration of the Contract ; removing on completion ; touching up and repainting surfaces and logos as required Metal hoarding A * high ; located at * ( ACCD) m

Providing ; erecting ; altering when required ; maintaining for the duration of the Contract ; removing on completion ; applying primer and two coats of synthetic paint on all exposed surfaces including painting logos and lettering ; making good all works disturbed after removal Metal hoarding Type * ; steel to * ; galvanised ; including posts, corrugated sheet panel coverings, cappings, base plates ; dowel bolts, cleats, runners, handrails, rafters, purlins, concrete bases ; providing and maintaining luminaries with * long tubular fluorescent lamps 20W at *m spacing ; excavating post bases ; disposing of surplus excavated material B * high ; * clear width walkway RETAINING WALLS Excavation Excavating trenches for retaining walls ; commencing at natural ground level C D not exceeding 1.50m deep 1.50 - 3.00m deep Excavated material E backfilling to excavation ; depositing ; compacting Surplus excavated material F removing from site ( ACCD) m3 ( ACCD) ( ACCD) m3 m3 ( ACCD) m

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/2

To C olle ction

$

EXTERNAL WORKS RETAINING WALLS (Cont'd) Graded filter material backfilling A behind retaining walls ; depositing and compacting in layers Compaction tests to determine B the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL

( ACCD)

m3

( ACCD)

nr

C

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Concrete works Concrete ; grade */*

nr

D

blinding under foundations ; * thick Concrete ; grade */* ; no-fines

( ACCD)

m3

E

filling behind retaining walls Reinforced concrete ; grade */*

( ACCD)

m3

F

foundations, attached bases or pile caps ground beams beds ; * thick

( ACCD) ( ACCD) ( ACCD)

m3 m3 m3

G H

Reinforced concrete ; grade */* ; severe exposure J retaining walls ; * thick ( ACCD) m3

Plain steel bars ; general reinforcement K round bars ; * diameter ; PROVISIONAL

( ACCD)

kg

Plain steel bars ; links, stirrups and binders L round bars ; * diameter ; PROVISIONAL

( ACCD)

kg

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/3

To C olle ction

$

EXTERNAL WORKS RETAINING WALLS (Cont'd) Deformed high yield steel bars ; general reinforcement A round bars ; * diameter ; PROVISIONAL Sawn formwork B vertical surfaces ; foundations, pile caps, ground beams and the like ( ACCD) vertical surfaces ; walls ( ACCD)

( ACCD)

kg

m2 m2

C D

vertical surfaces ; walls ; curved ( ACCD) vertical surfaces ; edges and breaks in walls exceeding 300 wide ( ACCD) vertical surfaces ; 100 - 200 wide ; edges and breaks in slabs ( ACCD) Formwork to produce fair faced finish ; lining with plywood

m2

E

m2

F

m

G H

vertical surfaces ; walls

( ACCD)

m2

vertical surfaces ; walls ; curved ( ACCD) vertical surfaces ; edges and breaks in walls exceeding 300 wide ( ACCD) Forming movement joints ; formwork ; temporary fillets ; * surface coatings and formation of rebates or other labours

m2

J

m2

K

in walls ; * wide x * deep ; filling with inorganic joint fillers ; * wide ; cutting joint filler ; * dowels at * centres ; straight ( ACCD) Pointing to movement joints with hot poured joint sealant ; both sides

m

L

* x * ; including backing rod

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/4

To C olle ction

$

EXTERNAL WORKS RETAINING WALLS (Cont'd) Plastic weep pipes ; casting into concrete A * diameter x * long Plastering Spatterdash B all surfaces of concrete ( ACCD) m2 ( ACCD) nr

External rendering ; two coats ; walls and columns C D * thick * thick ; curved ( ACCD) ( ACCD) m2 m2

Forming joints in * finishes ; priming surfaces of joints ; pointing with polysulphide liquid polymer sealant E * x * ; vertical ( ACCD) m

Brass dividing strips ; bedding in wall finish F * x * Painting Applying two coats of cement paint ; on fair faced concrete walls and columns G over 300 girth ( ACCD) m2 ( ACCD) m

Applying two coats of cement paint ; on rendered walls and columns H over 300 girth ROADS AND PAVED AREAS Paved areas Excavating over site to reduce levels J K average * deep over 200 average depth ( ACCD) ( ACCD) m2 m3 ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/5

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) Excavated material A filling in making up levels ; depositing in * layers ; compacting

( ACCD)

m3

B

filling in making up levels ; average * thick ; depositing in * layers ; compacting ( ACCD) Surplus excavated material

m2

C

removing from site Hardcore

( ACCD)

m3

D

filling in making up levels ; depositing and compacting in layers Rock-fill

( ACCD)

m3

E Sand F

in beds * thick

( ACCD)

m2

in beds * thick Granular material

( ACCD)

m2

G

in beds * thick Surfaces of hardcore

( ACCD)

m2

H

blinding with fine graded material ( ACCD) Compaction tests to determine

m2

J

the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL

( ACCD)

nr

K

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Concrete ; grade */*

nr

L M

beds ; * thick steps

( ACCD) ( ACCD)

m3 m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/6

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) Concrete ; grade */* ; sulphate resisting A B beds ; * thick steps ( ACCD) ( ACCD) m3 m3

Concrete ; grade */* ; mixed with an approved hardening admixture in accordance with the manufacturer's instructions C D beds ; * thick steps Reinforced concrete ; grade */* E F beds ; * thick steps ( ACCD) ( ACCD) m3 m3 ( ACCD) ( ACCD) m3 m3

Reinforced concrete ; grade */* ; sulphate resisting G H beds ; * thick steps ( ACCD) ( ACCD) m3 m3

Reinforced concrete ; grade */* ; mixed with an approved hardening admixture in accordance with the manufacturer's instructions J K beds ; * thick steps ( ACCD) ( ACCD) m3 m3

Fabric reinforcement ; BS 4483 ; square mesh ; ref. A142 ; weighing 2.22 kg/m2 ; 200 minimum side and end laps ; measured net - allow for laps L in concrete Sawn formwork M vertical surfaces ; not exceeding 100 wide ; edges and breaks in slabs ( ACCD) vertical surfaces ; 100 - 200 wide ; risers ( ACCD) ( ACCD) m2

m

N

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/7

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) A vertical surfaces ; 200 - 300 wide ; open strings ( ACCD) Precast concrete paving blocks ; BS7533-3:2005+A1:2009, BS EN 1338:2003 & PS * ; * x * x * ; * colour ; smooth finish ; bedding in lime and sand or cement mortar (1:3) bedding to the stated thickness ; pointing in cement, lime and sand or granite fines (1:3:6) B floors ; on 25 bedding ; laying to break joint pattern ( ACCD) floors ; on 25 bedding ; laying to butt joint pattern ( ACCD) Forming movement joints in concrete ; formwork D * wide x * deep ; left open Surfaces of concrete E finishing with a board edge ( ACCD) m2 ( ACCD) m

m

m2

C

m2

Layer of polythene sheeting ; lapped at joints F laying on * ; measured net - allow for laps ( ACCD) Local granite ; finely squared dressed surface finish to all exposed surfaces ; bedding in cement mortar ; flush pointing G * x * ; steps ; rebated (In Nr. 0) ( ACCD) extra over steps for fair ends ( ACCD)

m2

m nr

H

Granolithic Mix Type "C" ; washed finish J K floors ; * thick treads and risers ; * thick Brass dividing strips ; bedding in * L * x * ( ACCD) m ( ACCD) ( ACCD) m2 m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/8

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) Non-slip inserts to treads ; rounded top edge ; bedding in groove A 15 x 25 Access roads and car parking Excavating over site to reduce levels B C average * deep over 200 average depth ( ACCD) ( ACCD) m2 m3 ( ACCD) m

Excavating trenches for curbs * x * ; with beds ; commencing at reduced level D average * deep Excavated material E filling in making up levels ; depositing in * layers ; compacting by vibratory roller ( ACCD) filling in making up levels ; average * thick ; depositing in * layers ; compacting by vibratory roller ( ACCD) Surplus excavated material G removing from site Hardcore H filling in making up levels ; depositing and compacting in layers ( ACCD) m3 ( ACCD) m

m3

F

m2

( ACCD)

m3

J

filling in making up levels ; average * thick ; blinding with fine graded material ( ACCD) in beds * thick ; blinding with fine graded material ( ACCD) Granular material

m2

K

m2

L

filling in making up levels ; depositing and compacting in layers

( ACCD)

m3

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/9

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) A filling in making up levels ; average * thick in beds * thick Surfaces of hardcore C blinding with fine graded material ( ACCD) Surfaces of granular material D blinding with fine graded material ( ACCD) Compaction tests to determine E the maximum dry density and optimum moisture content in accordance with Geospec 3 ; PROVISIONAL

( ACCD) ( ACCD)

m2 m2

B

m2

m2

( ACCD)

nr

F

the in-situ field density and moisture content in accordance with Geospec 3 ; PROVISIONAL ( ACCD) Concrete ; grade */*

nr

G H J

foundations curbs blinding under foundations ; * thick Reinforced concrete ; grade */*

( ACCD) ( ACCD)

m3 m3

( ACCD)

m3

K

beds ; * thick

( ACCD)

m3

Fabric reinforcement ; BS 4483 ; square mesh ; ref. A142 ; weighing 2.22 kg/m2 ; 200 minimum side and end laps ; measured net - allow for laps L in concrete Sawn formwork M vertical surfaces ; foundations and the like ( ACCD) vertical surfaces ; curbs ( ACCD) ( ACCD) m2

m2 m2

N

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/10

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) A vertical surfaces ; curbs ; curved ( ACCD) vertical surfaces ; 100 - 200 wide ; curbs ( ACCD) vertical surfaces ; 100 - 200 wide ; curbs ; curved ( ACCD) Precast concrete ; grade */* D * x * curbs ; half battered ; bedding and haunching in cement mortar (1:3) one side ; fair faced finish to all exposed surfaces ; flush pointing ( ACCD) * x * curbs ; half battered ; bedding and haunching in cement mortar (1:3) one side ; curved units ; fair faced finish to all exposed surfaces ; flush pointing ( ACCD) * x * gutter channels ; splayed ; bedding in cement mortar (1:3) ; fair faced finish to all exposed surfaces ; flush pointing ( ACCD) * x * gutter channels ; splayed ; bedding in cement mortar (1:3) ; curved units ; fair faced finish to all exposed surfaces ; flush pointing ( ACCD) angle stones ; to gutter channels ; * x * ( ACCD) Forming movement joints in concrete ; formwork J * wide x * deep ; filling with inorganic joint fillers ; * wide ; cutting and perforating joint filler ; * dowels at * centres ; straight ( ACCD) Pointing to movement joints with hot poured joint sealant ; both sides K * x * ; including backing rod ( ACCD) m

m2

B

m

C

m

m

E

m

F

m

G

m

H

nr

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/11

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) Surfaces of concrete A finishing with a wood float ( ACCD) m2

Layer of polythene sheeting ; lapped at joints B laying on * ; measured net - allow for laps ( ACCD) Local granite ; finely squared dressed surface finish to all exposed surfaces ; bedding and haunching in cement mortar one side ; flush pointing C * x * ; curbs, fenders and the like ; chamfered

m2

( ACCD)

m

D

* x * ; curbs, fenders and the like ; chamfered ; curved ; all cutting ; templates ( ACCD) Road surfacing in accordance with Section 9 of the General Specification for Civil Engineering Works, current edition , issued by the Civil Engineering and Development Department of the Hong Kong SAR Government

m

E

sub-base ; in beds * thick on sub-grade ; compacting ; preparing sub-grade ( ACCD) roadbase ; bituminous material as Table 9.3 ; * nominal maximum aggregate size with * % bitumen content ( ACCD) base course ; bituminous material as Table 9.3 ; * nominal maximum aggregate size with * % bitumen content ( ACCD) wearing course ; bituminous material as Table 9.3 ; * nominal maximum aggregate size with * % bitumen content ( ACCD)

m2

F

m2

G

m2

H

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/12

To C olle ction

$

EXTERNAL WORKS ROADS AND PAVED AREAS (Cont'd) Marking out ; applying two thick coats of standard hot thermoplastic materials ; BS 3262-3, BS EN 1824 and BS EN 1871 ; on bitumen macadam roads A B C D lines ; * wide letters or numerals ; * high Chinese characters ; * high ( ACCD) ( ACCD) ( ACCD) m nr nr

arrow heads ; * wide x * long ; straight ( ACCD) FENCING AND BALUSTRADING Excavating Post holes ; commencing at reduced level

nr

E

not exceeding 0.30m3 Concrete ; grade */* Small bases for fencing posts

( ACCD)

nr

F

* x * x * deep

( ACCD)

nr

Fencing ; erected on existing paving Plastic coated galvanised steel wire to BS 4102 grade A ; chain link mesh ; 3.55 diameter wire and 75 mesh ; * diameter selvedge wire ; * diameter barbed wire ; * strands ; straining tight ; fixing with steel strips ; with and including * x * x * high * posts at * centres ; including all fittings, fixing screws and bolts ; as drawing nr. * G * high ; setting out to a curve but straight between posts ( ACCD) Extra over for end posts ; galvanised steel to BS EN 10025 grade * ; square hollow sections ; including all fittings, fixing screws and bolts H * x * x * high above ground ; * depth below ground ; setting in concrete bases (measured separately) ( ACCD)

m

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/13

To C olle ction

$

EXTERNAL WORKS FENCING AND BALUSTRADING (Cont'd) Galvanised steel to BS EN 10025 grade * gate posts ; tubular sections A * diameter x * high above ground ; * depth below ground ; setting in concrete bases (measured separately) ( ACCD) Gates ; steel to BS EN 10025 grade * ; galvanised ; welded connections Double leaves ; * x * x * angle framing ; * diameter tubular framing ; * nr. * x * panels infill with 75 x 25 oblong hole mesh ; to BS * ; * diameter wire ; spot welding ; including gate stops, gate catches and gate stays ; as drawing nr. * B gate size * x * high overall Ironmongery C pivot hinges ; 15 x 40 x 300 girth plate once bent and once rounded ; 25 diameter hardened steel rod 40 long with washer ; 50 x 50 x 16 plate twice rounded and once holed for 25 diameter pivot ( ACCD) sliding bolts ; 20 diameter shoot 500 girth once bent ; 50 x 50 x 10 holed guide twice rounded ; 25 diameter x 100 long tubing set in concrete ( ACCD) sliding bolts ; 20 diameter shoot 975 long ; 50 x 50 x 10 holed guides twice rounded ; 50 x 50 x 10 holed guide twice rounded with 25 stop ; * x * x * slotted hasp three times bent ; * x * x * staple holed and twice rounded ; 25 diameter x 100 long tubing set in concrete ( ACCD) brass padlocks ; * ( ACCD) ( ACCD) nr

nr

nr

D

nr

E

nr nr

F

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/14

To C olle ction

$

EXTERNAL WORKS FENCING AND BALUSTRADING (Cont'd) Applying one coat primer, two undercoats and one finishing coat of synthetic paint ; on galvanised metal General surfaces A over 300 girth ( ACCD) m2

Individual members of balustrades, fencing, railings and gates and the like B C over 300 girth not exceeding 300 girth ( ACCD) ( ACCD) m2 m

Mesh covered or ornamental fencing, railings and gates and the like ; both sides measured flat overall D over 300 girth EXTERNAL SERVICES Water installation Excavating trenches for service pipes ; commencing at reduced level ; not exceeding 1.50m total depth E * average depth Granular material ; beds F * x * under * diameter pipes Concrete ; grade 10/20 ; beds and surrounds ; formwork G * x * under * diameter pipes ; surrounds minimum * thick ( ACCD) m ( ACCD) m ( ACCD) m2

( ACCD)

m

Stop cock pits ; 75 concrete grade */* base ; half brick sides in seconds quality bricks in cement mortar ; flush pointing internally ; cast iron hinged cover and frame ; excavating ; disposing of surplus excavated material H 225 x 225 x 600 internally ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/15

To C olle ction

$

EXTERNAL WORKS EXTERNAL SERVICES (Cont'd) UPVC pipes and fittings ; solvent welded joints ; laying in trenches A B * diameter extra over pipes for * bendsn ( ACCD) ( ACCD) m nr

Galvanised steel pipes and fittings ; screwed joints ; laying in trenches C D * diameter extra over pipes for * bends High pressure PVC valves ; joints to plastic pipes E diaphragm or ball type stop valves ; * diameter ( ACCD) High pressure cast iron valves ; joints to galvanised steel pipes F gate valves ; * diameter ( ACCD) nr ( ACCD) ( ACCD) m nr

nr

Pipe protection ; protective petroleum based tape ; wrapping around galvanised steel pipes and fittings G * diameter ( ACCD) m

Pipe protection ; protective petroleum based tape ; wrapping around plastic pipes and fittings H * diameter Electrical installation Excavating trenches for cables or ducts ; commencing at reduced level ; not exceeding 1.50m total depth J * average depth Sand ; beds K L * x * under cables * x * under * diameter ducts ( ACCD) ( ACCD) m m ( ACCD) m ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/16

To C olle ction

$

EXTERNAL WORKS EXTERNAL SERVICES (Cont'd) Earth pits ; 75 concrete grade */* base ; half brick sides in seconds quality bricks in cement mortar ; flush pointing internally ; precast concrete grade */* cover slab reinforced with 12 diameter plain steel bars at 150 centres both ways and finished fair on top ; cast iron hinged cover and frame ; excavating ; disposing of surplus excavated material A 450 x 450 x 750 internally ( ACCD) nr

UPVC ducts and fittings ; solvent welded joints ; laying in trenches ; cable draw wires B C * diameter extra over ducts for * bends ( ACCD) ( ACCD) m nr

Galvanised steel ducts and fittings ; screwed joints ; laying in trenches ; cable draw wires D E * diameter extra over ducts for * bends Gas installation Excavating trenches for service pipes ; commencing at reduced level ; not exceeding 1.50m total depth F * average depth Sand ; beds G * x * under * diameter pipes Telephone installation Excavating trenches for cables or ducts ; commencing at reduced level ; not exceeding 1.50m total depth H * average depth Sand ; beds J K * x * under cables * x * under * diameter ducts ( ACCD) ( ACCD) m m ( ACCD) m ( ACCD) m ( ACCD) m ( ACCD) ( ACCD) m nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/17

To C olle ction

$

EXTERNAL WORKS EXTERNAL SERVICES (Cont'd) Cable draw pits ; 300 x 150 concrete grade */* strip foundations ; 75 bed of rubble fill as base ; 150 concrete grade */* sides finished fair one side and with rebated tops ; formwork ; 700 x 700 x 50 precast concrete cover reinforced with 12 diameter plain steel bars at 150 centres both ways and finished fair on top with adjustable handles ; excavating ; disposing of surplus excavated material A 600 x 600 x 550 internally ( ACCD) nr

UPVC ducts and fittings ; solvent welded joints ; laying in trenches ; cable draw wires B C * diameter extra over ducts for * bends ( ACCD) ( ACCD) m nr

Galvanised steel ducts and fittings ; screwed joints ; laying in trenches ; cable draw wires D * diameter ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/18

To C olle ction

$

EXTERNAL WORKS C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.20/1 MODBQ.20/2 MODBQ.20/3 MODBQ.20/4 MODBQ.20/5 MODBQ.20/6 MODBQ.20/7 MODBQ.20/8 MODBQ.20/9 MODBQ.20/10 MODBQ.20/11 MODBQ.20/12 MODBQ.20/13 MODBQ.20/14 MODBQ.20/15 MODBQ.20/16 MODBQ.20/17 MODBQ.20/18 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.20 - EXTERNAL WORKS To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.20/19

Bill Nr. MODBQ.21 ELECTRICAL INSTALLATION INCOMING MAINS ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Transit blocks ; fixed to walls inside L.V. Switch Room ; including busbar sections ; bolted connection to the busbar trunkings Approved type A * A ( ACCD) nr

600/1000V cross-linked polyethylene (XLPE) insulated cables ; operating temperature not exceeding 90 degrees Celsius to IEC 60502-1 ; PVC sheathed ; with armour ; solid copper conductors Power cables ; laid in trenches B * mm2 ; single-core cables ( ACCD) m

Power cables ; fixed to cable trays or ladders or other surface C * mm2 ; single-core cables Cable termination glands D * mm2 ; * core cables ( ACCD) nr ( ACCD) m

MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# 600/1000V cross-linked polyethylene (XLPE) insulated cables ; operating temperature not exceeding 90 degrees Celsius to IEC 60502-1 ; PVC sheathed ; with armour ; solid copper conductors Power cables ; laid or drawn into trunking E * mm2 ; single-core cables ( ACCD) m

Power cables ; fixed to cable trays or ladders or other surface F * mm2 ; multi-core cables ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/1

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Power cables ; drawn into underground pipe duct A * mm2 ; multi-core cables Cable termination glands B * mm2 ; * core cables ( ACCD) nr ( ACCD) m

600/1000V fire resistant, cross-linked polyethylene (XLPE) insulated cables ; low emission of smoke and corrosive gases when affected by fire ; operating temperature not exceeding 90 degrees Celsius to Category F2 of BS 7846 ; fire performance to BS 6387, IEC 60332-1-1 ; IEC 60332-1-2/IEC 60332-3-24 ; IEC 61034-2 ; IEC 60754-1 ; IEC 60754-2 ; EN 50267-2-1/EN 50267-2-2 ; sheathed ; with armour ; solid copper conductors Power cables ; fixed to cable trays or ladders or other surface C * mm2 ; multi-core cables ( ACCD) m

Power cables ; drawn into underground pipe duct D * mm2 ; multi-core cables Cable termination glands E * mm2 ; * core cables Cable cover tiles Laid on top of bedding layer to power cables buried direct in ground F * x * x * overall size ( ACCD) nr ( ACCD) nr ( ACCD) m

Steel cable surface trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns G * x * ; * compartments ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/2

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Surface trunkings and fittings ; fixed to soffits A * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for B C D E F bends tees reducing tees stop ends internal fire barriers ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr

Perforated steel trays and fittings to BS EN 10149-1 ; hot dipped galvanised to ISO 1460 and ISO 1461 Trays and fittings ; fixed to walls and columns G * wide ( ACCD) m

Trays and fittings ; fixed to soffits H * wide Extra over * wide trays for J K L M bends tees reducing tees reducing crosses ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

Busbar trunkings and fittings ; IEC 60439-2 / BS EN 60439-2 ; galvanized sheet steel construction ; all-insulated ; totally enclosed type ; not less than IP54 of IEC 60529 Triple pole and full rated neutral N * A mains ; fixed to walls and columns

( ACCD)

m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/3

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A B C D * A mains ; fixed to soffits ( ACCD) m nr nr nr

* A tap-off units ; plug-in type ( ACCD) * A flange ends * A fire barriers ( ACCD) ( ACCD)

Extra over * A ; triple pole and full rated neutral busbar trunkings for E F G elbows tees stop ends ( ACCD) ( ACCD) ( ACCD) nr nr nr

Air break switchgears to IEC 60947-2 and IEC 60947-3 Switches ; TPN ; for MCCB boards ; fixed to walls and columns H * A ( ACCD) nr

Switches ; TPN ; for equipment ; fixed to walls and columns J * A ( ACCD) nr

Switches ; TPN ; for busbar chambers ; fixed to walls and columns K * A ( ACCD) nr

Contactor switches ; SP ; for MCB boards ; fixed to walls and columns L * A ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/4

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Busbar chambers to IEC 60439-1 and IEC 60439-2 ; sheet steel ; totally enclosed type ; internal cables and busbar connections to associated control gears and switchgears Busbar chambers ; four fully sized, hard drawn solid electro-tinned copper busbars ; length sufficient for * number outgoing circuits ; fixed to walls and columns A * A ( ACCD) nr

Miniature circuit breaker (MCB) distribution boards to IEC 60439-3 ; IP41 minimum ; sheet steel ; totally enclosed type ; busbars ; ferrules ; integral incoming switch-disconnector (MCBs measured separately) MCB distribution boards ; TPN ; switch-disconnector to category AC 22A ; flush mounted to walls B C * way ; * A ( ACCD) nr

blanking plates for single pole spare ways ( ACCD) Moulded case circuit breaker (MCCB) distribution boards ; sheet steel ; IEC 60439-1 and IEC 60439-3 ; IP41 minimum ; Type A ; busbars ; integral main isolating switches (MCCBs and MCBs measured separately) MCCB distribution boards ; TPN ; rated short circuit withstand current not less than * kA ; fixed to walls and columns

nr

D E

* way ; * A

( ACCD)

nr

blanking plates for triple pole spare ways ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/5

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Miniature circuit breakers (MCBs) to IEC 60898-1 MCBs ; * pole ; rated instantaneous tripping current Type B ; rated short circuit breaking capacity not less than * kA ; fixed in distribution boards A * A ( ACCD) nr

Moulded case circuit breakers (MCCBs) to IEC 60947-2 MCCBs ; * pole ; rated short circuit breaking capacity not less than * kA ; facility for padlocking ; fixed in distribution boards B * A ( ACCD) nr

Residual current-operated circuit breakers without integral overcurrent protection (RCCBs) to IEC 61008-1 RCCBs ; double pole ; instantaneous tripping type without time delaying function ; rated residual operating current *mA ; rated short circuit making and breaking capacity not less than 3 kA ; rail mounted in distribution boards C * A ( ACCD) nr

RCCBs ; four pole ; instantaneous tripping type without time delaying function ; rated residual operating current *mA ; rated short circuit making and breaking capacity not less than 3 kA ; rail mounted in distribution boards D * A ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/6

To C olle ction

$

ELECTRICAL INSTALLATION MAIN AND SUB-MAIN DISTRIBUTION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Active harmonic filters Active harmonic filters ; IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4 and IEC 61000-4-5 ; all as detailed in the Electrical General Specification ; complete with diagnostics control panel, built-in RS485/232 serial communication ports, power monitoring system, protection devices for thermal overload, internal short circuit and invertor bridge abnormal operation, read-out indicators, circuit breakers, control push buttons and all necessary accessories ; housed in high quality steel sheet industrial grade cabinet to IP44 with front door and key lock ; all necessary interfacing works with other equipment A * kVA ; connection to distribution boards ( ACCD) GENERAL LIGHTING AND SMALL POWER ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Final circuits ; 450/750V PVC insulated cables ; general purpose ; operating temperature not exceeding 70 degrees Celsius to code designation 60227 IEC 01 of IEC 60227-3 ; non-sheathed ; solid copper conductors ; drawing into and including conduits and fittings and/or flexible conduits and fittings or any cable installing facilities as specified ; controlling cables ; earth continuity conductors From distribution board ref. * ; * mm2 ; * core cables B to lighting points ; battery power supply ; local switch control ( ACCD) to lighting points ; battery power supply ; central control ( ACCD) to lighting points ; battery power supply ; grid switch controln ( ACCD) to lighting points ; battery power supply ; dimmer switch control ( ACCD)

nr

nr

C

nr

D

nr

E

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/7

To C olle ction

$

ELECTRICAL INSTALLATION GENERAL LIGHTING AND SMALL POWER ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A to lighting points ; battery power supply ; contactor control ( ACCD) to lighting track points ; local switch control ( ACCD) to lighting switch points ; fixed in bedhead trunkings ; one way ( ACCD) to dimmer switch points ; one way ( ACCD) to contactor switch points to fan regulator points ( ACCD) ( ACCD)

nr

B

nr

C

nr

D

nr nr nr

E F G

to unswitched or switched fused connector unit points ; radial ( ACCD) to unswitched or switched socket points ; * gangs ; ring ( ACCD) to isolator points ; waterproof ; IP * ( ACCD) to DP switch points ; flameproof ( ACCD) to photocell device points ; waterproof ; IP * to shaver supply unit points ; radial to cooker control unit points

nr

H

nr

J

nr nr

K L

( ACCD)

nr

M

( ACCD) ( ACCD)

nr nr

N

Final circuits ; 500V (light duty grade) mineral insulated cables ; IEC 60702-1 and IEC 60702-2 ; sheathed ; plastic outer coverings of low smoke halogen free or low smoke zero halogen ; IEC 60754-1 ; copper conductors ; fixed to walls and columns or ceilings with any cable installing facilities From distribution board ref. * ; * mm2 ; * core cables P to lighting points ; local switch control ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/8

To C olle ction

$

ELECTRICAL INSTALLATION GENERAL LIGHTING AND SMALL POWER ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A to lighting points ; central switch control

( ACCD)

nr

B

to lighting switch points ; one way ( ACCD) to unswitched or switched socket points ; * gangs ; ring ( ACCD) Luminaries ; complete with lamps or tubes and control gears and ballasts ; connections to cables and conduits system ; earthing and bonding ; provision of all necessary component parts, suspension rods hangers and fixings Fluorescent fittings ; electronic ballasts ; fixed to walls and columns, ceilings or false ceilings

nr

C

nr

D

* no. x * W ; * mm ; batten type ; surface mounted (ref. *) ( ACCD) * no. x * W ; * mm ; batten type ; pendant mounted (ref. *) ( ACCD) * no. x * W ; * x * ; * diffusers ; recess mounted (ref. *) ( ACCD) * no. x * W ; * x * ; * diffusers ; recess mounted ; completed with battery and charger ; sensors (ref. *) ( ACCD) * no. x * W ; * x * ; * diffusers ; recess mounted ; completed with dimming ballast (ref. *) ( ACCD) * no. x * W ; * x * ; * diffusers ; surface mounted (ref. *) ( ACCD)

nr

E

nr

F

nr

G

nr

H

nr

J

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/9

To C olle ction

$

ELECTRICAL INSTALLATION GENERAL LIGHTING AND SMALL POWER ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Fluorescent fittings ; self-contained emergency maintained type ; lamps, control gear ; electronic ballast ; battery and charger, * hour emergency operation ; provision of all necessary component parts ; fixed to walls and columns, ceilings or false ceilings A * no. x * W ; * mm ; batten type ; surface mounted ; complete with battery and charger ; sensors (ref. *) ( ACCD) * no. x * W ; * mm ; for exit sign boxes ; surface mounted ; complete with battery and charger ; sensors (ref. *) ( ACCD) Accessories of approved type Lighting switches ; single pole ; micrograph type ; fixed to walls and columns C * A ; * gang ; one way ; flush mounted

nr

B

nr

( ACCD)

nr

D

* A ; * gang ; one way ; metalclad front plates ; surface mounted ( ACCD) Switched socket outlets ; fixed to walls and columns

nr

E F

* A ; * gang ; flush mounted * A ; * gang ; metalclad front plates ; surface mounted

( ACCD)

nr

( ACCD)

nr

Switched socket outlets ; integral single pole switches for unswitched type ; with residual current devices ; fixed to walls and columns G H * A ; * gang ; surface mounted * A ; * gang ; metalclad front plates ; surface mounted * A ; * gang ; flameproof ; surface mounted ( ACCD) nr

( ACCD)

nr

J

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/10

To C olle ction

$

ELECTRICAL INSTALLATION GENERAL LIGHTING AND SMALL POWER ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Fused spur units ; fixed to walls and columns, ceilings or false ceilings A * A ; surface mounted ( ACCD) nr

Fused spur units ; integral double pole switches and pilot lights ; fixed to walls and columns, ceilings or false ceilings B C * A ; flush mounted * A ; flame proof ; surface mounted ( ACCD) nr

( ACCD)

nr

Fused spur units ; integral flex outlets ; fixed to walls and columns, ceilings or false ceilings D E * A ; flush mounted * A ; metalclad front plates ; surface mounted ( ACCD) nr

( ACCD)

nr

Switched fused connection units ; * pole type with neon indicators ; integral switch ; fixed to walls and columns, ceilings or false ceilings F * A ; flush mounted ( ACCD) nr

Isolator switches ; TPN ; fixed to walls and columns G H * A ; surface mounted ( ACCD) nr

* A ; waterproof ; IP54 minimum ; surface mounted ( ACCD) * A ; flameproof ; surface mounted ( ACCD) Fan regulators ; D.P. switch control ; pilot light ; fixed to walls and columns

nr

J

nr

K

* A ; surface mounted

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/11

To C olle ction

$

ELECTRICAL INSTALLATION

CALL BELL SYSTEM ; INTERNALLY/ IN PLANT ROOM / EXTERNALLY# Electric supply and control circuits ; PVC insulated cables ; drawing into and including steel conduits and fittings ; earth continuity conductors * mm2 ; single-core cables ; from call boxes to the following outlet points A B call buzzer points at * room ( ACCD) nr nr

indication lamp points at * room ( ACCD) * mm2 ; single-core cables ; from indicating panel in * room (ref. *) to the following outlet points

C

call box points in * room * mm2 ; single-core cables ; between indication panels

( ACCD)

nr

D

from panel in * room to panel in * room ( ACCD) Accessories Bells ; underdome type ; fixed to substantial frame

nr

E

low tone call bells

( ACCD)

nr

Buzzers ; contained in insulating plastic case F low tone call buzzers Call bell pushes ; fixed in 35 deep conduit box ; flush pattern G call bell pushes ( ACCD) nr ( ACCD) nr

Table-type pushes ; single way ; plastic bases, top plates and label holders H table-type pushes ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/12

To C olle ction

$

ELECTRICAL INSTALLATION CALL BELL SYSTEM ; INTERNALLY/ IN PLANT ROOM / EXTERNALLY# (Cont'd) Indication lights ; fixed to walls and columns A indication lights ; * W lamps ; surface mounted ; suitable for 24V A.C. (ref. *) ( ACCD) Call boxes ; flexible cables connected to wall outlets ; indicating lights ; push buttons ; reset buttons ; all necessary interconnecting wiring Call boxes ; mounting on table tops B call boxes ; located in * room ( ACCD) nr

nr

Call boxes ; mounting on walls and columns C call boxes ; located in * room ( ACCD) nr

Indication panels ; complete power supply units ; indicating lights ; push buttons ; reset buttons ; low tone buzzers ; all necessary interconnecting wiring (ref. *) Indication panels ; mounting on walls and columns D indication panels ; located in * room ( ACCD) Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns E * x * ; * compartments ( ACCD) m

nr

Surface trunkings and fittings ; fixed to soffits F * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for G H bends tees ( ACCD) ( ACCD) nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/13

To C olle ction

$

ELECTRICAL INSTALLATION CALL BELL SYSTEM ; INTERNALLY/ IN PLANT ROOM / EXTERNALLY# (Cont'd) A reducing tees ( ACCD) nr

EOS ; TELEPHONE AND PABX SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns B * x * ; * compartments ( ACCD) m

Surface trunkings and fittings ; fixed to soffits C * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for D E F bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Conduit system for final circuit ; including galvanised steel conduits and fittings and/or flexible conduits and fittings or any cable installing facilities ; complete with drawn wires From trunkings system (trunkings measured separately) to G H telephone outlet points fax outlet points ( ACCD) ( ACCD) nr nr

Accessories ; * type ; galvanised sheet metal plate finished ; moulded blank plates Outlet plates for J telephone outlet boxes ; * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/14

To C olle ction

$

ELECTRICAL INSTALLATION

EOS ; COMPUTER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns A * x * ; * compartments ( ACCD) m

Surface trunkings and fittings ; fixed to soffits B * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for C D E bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Conduit system for final circuit ; including galvanised steel conduits and fittings and/or flexible conduits and fittings or any cable installing facilities ; complete with drawn wires From trunkings system (trunkings measured separately) to F computer outlet points ( ACCD) nr

Accessories ; * type ; galvanised sheet metal plate finished ; moulded blank plates Outlet plates for G computer outlet boxes ; * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/15

To C olle ction

$

ELECTRICAL INSTALLATION

EOS ; INTER-COMMUNICATION AND PUBLIC ADDRESS SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns A * x * ; * compartments ( ACCD) m

Surface trunkings and fittings ; fixed to soffits B * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for C D E bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Conduit system for final circuit ; including galvanised steel conduits and fittings and/or flexible conduits and fittings or any cable installing facilities ; complete with drawn wires From trunkings system (trunkings measured separately) to F G H J loud speaker outlet points microphone outlet points intercom unit outlet points ( ACCD) ( ACCD) ( ACCD) nr nr nr

intercom master unit outlet points ( ACCD) volume control outlet points ( ACCD)

nr nr

K

Accessories ; * type ; galvanised sheet metal plate finished ; moulded blank plates Outlet plates for L loudspeaker outlet boxes ; * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/16

To C olle ction

$

ELECTRICAL INSTALLATION EOS ; INTER-COMMUNICATION AND PUBLIC ADDRESS SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A B microphone outlet boxes ; * x * ( ACCD) intercom unit outlet boxes ; * x * ( ACCD) intercom master unit outlet boxes ; * x * ( ACCD) volume control outlet boxes ; * x * ( ACCD) EOS ; STAFF PAGING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns E * x * ; * compartments ( ACCD) m nr

nr

C

nr

D

nr

Surface trunkings and fittings ; fixed to soffits F * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for G H J bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

EOS ; CCTV ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns K * x * ; * compartments ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/17

To C olle ction

$

ELECTRICAL INSTALLATION EOS ; CCTV ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Surface trunkings and fittings ; fixed to soffits A * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for B C D bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Conduit system for final circuit ; including galvanised steel conduits and fittings and/or flexible conduits and fittings or any cable installing facilities ; complete with drawn wires From trunkings system (trunkings measured separately) to E F CCTV monitor outlet points CCTV camera outlet points ( ACCD) ( ACCD) nr nr

Accessories ; * type ; galvanised sheet metal plate finished ; moulded blank plates Outlet plates for G CCTV monitor outlet boxes ; * x * ( ACCD) CCTV camera outlet boxes ; * x * ( ACCD) TRUNKING, LADDER AND TRAY ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel cable trunkings and fittings to IEC 61084-1 ; removable covers ; cable supporting facilities Surface trunkings and fittings ; fixed to walls and columns J * x * ; * compartments ( ACCD) m

nr nr

H

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/18

To C olle ction

$

ELECTRICAL INSTALLATION TRUNKING, LADDER AND TRAY ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Surface trunkings and fittings ; fixed to soffits A * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment surface trunkings for B C D bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Steel underfloor trunkings and fittings to IEC 61084-1 and IEC 61084-2 ; covers Underfloor trunkings and fittings ; fixed to floors E * x * ; * compartments Extra over * x * ; * compartment underfloor trunkings for F G H J bends tees crosses floor boxes ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

Bedhead trunkings and fittings ; * type ; cover face plates including all necessary perforations ; running joints and fixed (power sockets, switches, etc. mounted on bedhead trunkings measured separately) Bedhead trunkings and fittings ; surface mounted on walls and columns K * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment bedhead trunkings for L M N bends tees crosses ( ACCD) ( ACCD) ( ACCD) nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/19

To C olle ction

$

ELECTRICAL INSTALLATION TRUNKING, LADDER AND TRAY ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A stop ends ( ACCD) nr

Steel skirting trunkings and fittings to IEC 61084-1 ; covers Skirting trunkings and fittings ; fixed to walls and columns B * x * ; * compartments ( ACCD) m

Extra over * x * ; * compartment skirting trunkings for C D bends tees ( ACCD) ( ACCD) nr nr

Perforated metal trays and fittings to BS EN 10149-1 ; hot dipped galvanised to ISO 1460 and ISO 1461 Trays and fittings ; fixed to walls and columns E * wide ( ACCD) m

Trays and fittings ; fixed to soffits F * wide Extra over * wide trays for G H J bends tees reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr ( ACCD) m

ELECTRICAL APPLIANCES ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# SUPPLYING complete flexible adjacent and FIXING the following items ; with all conduits and cables ; cords and plugs connections to power source

Electrical appliances K hand dryers ; wall mounted ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/20

To C olle ction

$

ELECTRICAL INSTALLATION ELECTRICAL APPLIANCES ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A sink water heaters ; hot water capacity * litres ; * kW ; wall mounted ( ACCD) room coolers ; energy label Grade 1 ; type 'C' ; complete with drain pipes, supporting hangers and fixings ( ACCD) domestic exhaust fans ; fan size 150 ( ACCD) quartz clocks ; battery operated ; wall mounted ( ACCD) LIGHTNING PROTECTION ; IEC 62305, BS EN 62305, AS/NZS 1768, NFPA 780 ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Air termination Copper rods ; approved type ; including all brackets, clamps and connections ; fixed to structure E * diameter ; * high ( ACCD) nr

nr

B

nr

C

nr

D

nr

Lightning tapes ; supported at approved spacing ; including jointing and fixing Tinned copper tapes ; fixed to top of roofs F 25 x 3mm ( ACCD) m

Tinned copper tapes ; fixed to top of walls and columns or soffits G 25 x 3mm ( ACCD) m

Down conductors ; high quality metal spacer saddles at 1m apart maximum ; double rivetted joints Annealed tinned copper strips / tapes ; fixed to walls and columns or soffits H 25 x 3mm ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/21

To C olle ction

$

ELECTRICAL INSTALLATION LIGHTNING PROTECTION ; IEC 62305, BS EN 62305, AS/NZS 1768, NFPA 780 ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Earth electrodes ; complying Electricity Supply Lines (Protection) Regulation Earth rod electrodes ; copper ; hardened steel point penetrating ends ; driving into ground within earth pits A * diameter ; * long Bonds Connecting lightning protection system to other metal work B 475/0.5 diameter flexible copper strandsn ( ACCD) 25 x 3 soft annealed copper strips ( ACCD) EARTHING AND BONDING ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Equipotential bonding to all exposed and extraneous conductive parts of non electric services ; BS EN 50310 ; complete with all component clamps and accessories ; complying Electricity (Wiring) Regulations ; all as described in the Particular Specification and General Specification for Electrical Installation Allow for D main equipotential bonding ; except for system supplementary equipotential bonding ; except for system ( ACCD) nr

nr

C

nr

( ACCD)

-

item

-

E

( ACCD)

-

item

-

Tinned copper tapes ; supported at approved spacing ; including jointing and fixing Tapes ; fixed to wall and columns or soffits F * x * ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/22

To C olle ction

$

ELECTRICAL INSTALLATION EARTHING AND BONDING ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Tapes ; fixed to cable trays A * x * Tapes ; fixed to trunkings B * x * ( ACCD) m ( ACCD) m

* / * PVC insulated * cables ; copper conductors Cables in conduits C * mm2 ; single-core Earth terminals Tinned solid copper earth terminal ; connections of all earth tapes ; fixed to walls and columns D approved size ( ACCD) m ( ACCD) m

Earth electrodes ; complying Electricity Supply Lines (Protection) Regulation Earth rod electrodes ; copper ; hardened steel point penetrating ends ; driving into ground within earth pits E for * system ; * diameter ; * long ( ACCD) ELECTRICAL SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items are in respect of the whole Electrical Installation Allow for F marking the positions of holes, mortices, chases and the like in the structure ( ACCD)

nr

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/23

To C olle ction

$

ELECTRICAL INSTALLATION ELECTRICAL SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A inspection, testing and commissioning of the complete Electrical Installation (Inspection and testing for Low Voltage Cubicle Switchboards Installation ; testing of Diesel Generating Sets Installation and Uninterruptible Power Supply System measured separately) ; all as described in the Particular Specification and Section D1 to D4 of the General Specification for Electrical Installation ( ACCD) inspection, operation and maintenance of the complete Electrical Installation during Maintenance Period (Inspection, operation and maintenance of Low Voltage Cubicle Switchboards Installation, Diesel Generating Sets Installation and Uninterruptible Power Supply System during Maintenance Period measured separately) ; all as described in the Particular Specification and Section E3 of the General Specification for Electrical Installation ( ACCD) providing all necessary power and water, diesel and fuels in connection with inspection, testing and commissioning and maintenance ( ACCD) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Electrical Installation ( ACCD) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Electrical Installation ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/24

To C olle ction

$

ELECTRICAL INSTALLATION ELECTRICAL SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing operation and maintenance (O&M) manuals and user manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Electrical Installation ( ACCD) providing tuition of Employer's staff for a period of * weeks ; all as described in the Particular Specification and Section E1.1 of the General Specification for Electrical Installation ( ACCD) providing sample boards ; all as described in the Particular Specification and Section A3.7 of the General Specification for Electrical Installation ( ACCD) providing mock-ups and prototypes ( ACCD) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between couduits and sleeves ( ACCD) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between cables and sleeves ( ACCD) supplying and fixing fire stopping to walls and floors ( ACCD) supplying and fixing one complete set of spare fuses in accordance with Section B1.8 of the General Specification for Electrical Installation ; including wooden board with painting ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

H

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/25

To C olle ction

$

ELECTRICAL INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.21/1 MODBQ.21/2 MODBQ.21/3 MODBQ.21/4 MODBQ.21/5 MODBQ.21/6 MODBQ.21/7 MODBQ.21/8 MODBQ.21/9 MODBQ.21/10 MODBQ.21/11 MODBQ.21/12 MODBQ.21/13 MODBQ.21/14 MODBQ.21/15 MODBQ.21/16 MODBQ.21/17 MODBQ.21/18 MODBQ.21/19 MODBQ.21/20 MODBQ.21/21 MODBQ.21/22 MODBQ.21/23 MODBQ.21/24 MODBQ.21/25 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.21 - ELECTRICAL INSTALLATION C.fwd $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/26

ELECTRICAL INSTALLATION C O L L E C T I O N To Summary B.fwd $ $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.21/27

Bill Nr. MODBQ.22 AIR CONDITIONING INSTALLATION COOLING WATER CONDENSING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Ductile iron pipes and fittings ; BS EN 545 ; appropriate grade ; metallic zinc coating with bitumen painted externally ; internally lined with cement mortar to BS EN 545, BS EN 598, BS EN 969 type * ; screwed joints ; off-site pre-fabricated metal mounting and fixing brackets Pipework and fittings ; suspended from soffits A * diameter ( ACCD) m

Pipework and fittings ; fixed to walls and columns B * diameter ( ACCD) m

Pipework and fittings ; laid on floors C * diameter Extra over pipework for D E F G * bends * tees * reducing bends * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

Flow and return header pipes ; blanked off at spare outlets ; supporting on floors H * diameter ; * long ; with * nr. * x * x * branches ( ACCD) Cast gunmetal valves Gate valves J * diameter ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/1

To C olle ction

$

AIR CONDITIONING INSTALLATION COOLING WATER CONDENSING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Bronze valves Drain valves A * diameter Brass cast iron valves Motorized control valves ; DDC control B * diameter Ductile iron valves Butterfly valves C * diameter Cast iron strainers Strainers ; double type D * diameter Gunmetal automatic air vents Automatic air vents ; non-ferrous floats and guides ; corrosion resistance valves and seats E to suit * diameter pipes Thermometers Thermometers ; liquid immersion ; complete with thermometer pockets F to suit * diameter pipes Pressure gauges Pressure gauges G to suit * diameter pipes ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr

Test plugs ; complete with sealing caps Test plugs H to suit * diameter pipes ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/2

To C olle ction

$

AIR CONDITIONING INSTALLATION COOLING WATER CONDENSING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Energy meters ; complete with temperature sensors, flow meters, flow transmitter / converter units, calculator units Energy meters ; integrate with CCMS A to suit * diameter pipes ( ACCD) nr

Fresh water cooling towers ; glass reinforced plastics (GRP) casings and removable covers ; fan motors ; self-extinguishing PVC fill ; AISI 316 stainless steel support structures ; fan guards ; gear boxes, bleed-off pipes, switches and necessary components ; adequate acoustic treatment ; certified by Cooling Tower Institute Cooling towers ; induced draught fans ; axial type B heat rejection capacity * kW (ref. *) ( ACCD) Condenser water pump sets ; direct driven by electric motors ; cast iron casings ; stuffing boxes ; mechanical seal ; as described in the Particular Specification and drawing nr. * Fresh water pump sets ; centrifugal type C water flow rate * l/s ; differential static pressure * kPa (ref. *) ( ACCD) CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Design, supply and install steel pipes and fittings ; ISO 65 / BS EN 10255 (medium grade) ; painted externally ; welded joints ; off-site pre-fabricated metal mounting and fixing brackets Pipework and fittings ; suspended from soffits D * diameter ( ACCD) m

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/3

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pipework and fittings ; fixed to walls and columns A * diameter ( ACCD) m

Pipework and fittings ; laid on floors B * diameter Extra over pipework for C D E F * bends * tees * reducing bends * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr ( ACCD) m

Flow and return header pipes ; blanked off at spare outlets ; supporting on floors G * diameter ; * long ; with * nr. * x * x * branches ( ACCD) Bronze valves Drain valves H * diameter Cast iron valves Gate valves J * diameter Globe valves K * diameter Double regulating valves L * diameter Brass cast iron valves Motorized control valves ; DDC control M * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/4

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Ductile iron valves Butterfly valves A * diameter Flow meters Flow meters ; BS EN 61000-6-1, BS EN 61000-6-2, BS EN 61000-6-3 and BS EN 61000-6-4 ; direct reading type ; complete with flow sensors ; integral signal converter / transmitter, digital display unit ; electromagnetic and ultrasonic B to suit * diameter pipes Cast iron strainers Strainers ; double type C * diameter Gunmetal automatic air vents Automatic air vents ; non-ferrous floats and guides ; corrosion resistance valves and seats D to suit * diameter pipes Expansion joints ; stainless steel Bellow expansion joints ; axial movement pattern type E * diameter ; complete with * insulation Thermometers Thermometers ; air immersion ; complete with sealing plugs and test holes F to suit * diameter pipes ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr

( ACCD)

nr

Thermometers ; liquid immersion ; complete with thermometer pockets G to suit * diameter pipes ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/5

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pressure gauges Pressure gauges A to suit * diameter pipes ( ACCD) nr

Test plugs ; complete with sealing caps Test plugs B to suit * diameter pipes ( ACCD) nr

Energy meters ; complete with temperature sensors, flow meters, flow transmitter / converter units, calculator units Energy meters ; integrate with CCMS C to suit * diameter pipes ( ACCD) nr

CFC and HCFC free phenolic foam insulation ; rigid preformed section ; 40 kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive * thick ; fixing externally to pipework and fittings D * diameter ( ACCD) m

Extra over * thick insulation to pipework for E F G H * bends * tees * reducing bends * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr

Polystyrene insulation ; preformed or slab ; Class "O" fire rating ; non-self combustible ; * vapour barrier ; fixing with approved adhesive * thick ; fixing externally to pipework and fittings J * diameter ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/6

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Extra over * thick insulation to pipework for A B C * bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

* thick ; fixing externally to flow and return header pipes D * diameter ; * long ; with * nr. * x * x * branches ( ACCD) CFC and HCFC free phenolic foam insulation ; rigid preformed 'oversize' section ; 40 kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive * thick ; to valves E F G H J K * gate valves * globe valves * butterfly valves * motorized control valves * double regulating valves * drain valves * thick ; to strainers L * strainers ; double type * thick ; to automatic air vents M * automatic air vents ( ACCD) nr ( ACCD) nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr

nr

Polystyrene insulation ; preformed or slab ; Class "O" fire rating ; non-self combustible ; * vapour barrier ; fixing with approved adhesive * thick ; to valves N * gate valves ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/7

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A * drain valves * thick ; to strainers B * strainers ; double type * thick ; to automatic air vents C * automatic air vents ( ACCD) nr ( ACCD) nr ( ACCD) nr

Protective coverings and finishings ; hammer finish aluminium cladding to CFC and HCFC free phenolic foam * thick ; fixing to * thick insulation for D * diameter pipes ( ACCD) m

Extra over * thick protective coverings and finishings to * thick insulation for E F G H * bends * tees * reducing bends * reducing tees ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr

Protective coverings and finishings ; galvanised iron wire netting ; cement plastering and painting to polystyrene insulation * thick ; fixing to * thick insulation for J * diameter pipes ( ACCD) m

Extra over * thick protective coverings and finishings to * thick insulation for K L M * bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

* thick ; fixing to * thick insulation for N * diameter header pipes ; * long ; with * nr. * x * x * branches ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/8

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Protective coverings and finishings ; hammer finish aluminium cladded hinged split boxes to CFC and HCFC free phenolic foam insulation * thick ; fixing to * thick insulation for A B C D E F G H * automatic air vents * strainers ; double type * gate valves * globe valves * butterfly valves * motorized control valves * double regulating valves * drain valves ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr nr

Protective coverings and finishings ; galvanised iron wire netting ; cement plastering and painting ; hammer finish aluminium cladded hinged split boxes to polystyrene insulation * thick ; fixing to * thick insulation for J K L M * automatic air vents * strainers ; double type * gate valves * drain valves ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/9

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Design, supply and install packaged chillers ; * refrigerant ; factory assembled and tested units ; ARI Standard 550/590 ; BS EN 14511-1 to BS EN 14511-4 ; centrifugal type compressors ; condensers ; motors ; evaporators ; electronic/microcomputer control panel ; piping connections ; adequate acoustic treatment ; insulations ; all sensing devices, accessories and associated services ; as described in the Particular Specification and drawing nr. * Fresh water cooled chillers A cooling capacity * kW (ref. *) ( ACCD) nr

Design, supply and install packaged chillers ; * refrigerant ; factory assembled and tested units ; ARI Standard 550/590 : 2003 ; oil-free ; semi-hermetic ; variable speed ; two-stage centrifugal type compressors ; condensers ; permanent magnet synchronous motors with integrated liquid refrigerant injection system for cooling ; evaporators ; electronic / microcomputer control panel ; piping connections ; adequate acoustic treatment ; insulations ; sensing devices, accessories and associated services ; all as specified in the Particular Specification Water-cooled chillers B cooling capacity * kW (ref. *) ( ACCD) nr

Pressed steel sectional feed and expansion tank ; BS 1564 ; heavily galvanised ; adequate insulation with protective coverings and finishings ; complete with valves, drain facilities, overflow pipes, accessories and connections Expansion tanks ; on roof C * litres ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/10

To C olle ction

$

AIR CONDITIONING INSTALLATION CHILLED WATER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Chilled water pump sets ; direct driven by electric motors ; cast iron casings ; stuffing boxes ; mechanical seal ; adequate insulations ; as described in the Particular Specification and drawing nr. * Chilled water pump sets ; centrifugal type A water flow rate * l/s ; differential static pressure * kPa (ref. *) ( ACCD) Design, supply and install removable working and service platform ; rigid construction ; stainless steel fixing bolts and nuts ; all necessary accessories Working and service platform ; galvanised steel assembled B approximate size * x * x * ( ACCD) nr

nr

WATER TREATMENT ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Design, supply and install by water treatment specialist complete water treatment system ; all necessary chemical treatment equipment and plant ; metering pumps, panel box, chemical storage ; control, accessories and connections, piping and fittings, drilling and tapping into circulation system Water treatment ; by chemical agents C for cooling tower/condenser cooling water for chilled water

( ACCD) ( ACCD)

-

item item

-

D

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/11

To C olle ction

$

AIR CONDITIONING INSTALLATION WATER TREATMENT ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Water treatment service by water treatment specialist for commissioning and testing, pre-cleaning, day-to-day water treatment of the installed system ; on-site water treatment service and water analysis, reports ; all labour, testing equipment, chemicals, instruments, interconnecting pipework, accessories and associated services Water treatment service ; within Contract Period A for cooling tower/condenser cooling water for chilled water Water treatment service ; during Maintenance Period C for cooling tower/condenser cooling water for chilled water

( ACCD) ( ACCD)

-

item item

-

B

( ACCD) ( ACCD)

-

item item

-

D

Water treatment proposal by water treatment specialist ; water specification, method of analysis and testing together with testing report format Water treatment proposal E for all air conditioning water systems

( ACCD)

-

item

-

CONDENSATE DRAIN SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel pipes and fittings ; ISO 65 / BS EN 10255 (medium grade) ; galvanised ; welded joints ; off-site pre-fabricated metal mounting and fixing brackets Pipework and fittings ; suspended from soffits F * diameter ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/12

To C olle ction

$

AIR CONDITIONING INSTALLATION CONDENSATE DRAIN SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pipework and fittings ; fixed to walls and columns A * diameter ( ACCD) m

Pipework and fittings ; laid on floors B * diameter Extra over pipework for C D E * bends * tees * reducing tees Bronze valves Drain valves F * diameter Gunmetal automatic air vents Automatic air vents ; non-ferrous floats and guides ; corrosion resistance valves and seats G to suit * diameter pipes ( ACCD) nr ( ACCD) nr ( ACCD) ( ACCD) ( ACCD) nr nr nr ( ACCD) m

CFC and HCFC free phenolic foam insulation ; rigid preformed section ; 40 kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive 25 (minimum) thick ; fixing externally to pipework and fittings H * diameter ( ACCD) m

Extra over 25 (minimum) thick insulation to pipework for J K L * bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/13

To C olle ction

$

AIR CONDITIONING INSTALLATION CONDENSATE DRAIN SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) CFC and HCFC free phenolic foam insulation ; rigid preformed 'oversize' section ; 40 kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive 25 (minimum) thick ; to valves A * drain valves ( ACCD) nr

25 (minimum) thick ; to automatic air vents B * automatic air vents ( ACCD) nr

Protective coverings and finishings ; hammer finish aluminium cladding to CFC and HCFC free phenolic foam insulation * thick ; fixing to 25 (minimum) thick insulation for C * diameter pipes ( ACCD) m

Extra over * thick protective coverings and finishings to 25 (minimum) thick insulation for D E F * bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr

Protective coverings and finishings ; hammer finish aluminium cladded hinged split boxes to CFC and HCFC free phenolic foam insulation * thick ; fixing to 25 (minimum) thick insulation for G H * automatic air vents * drain valves ( ACCD) ( ACCD) nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/14

To C olle ction

$

AIR CONDITIONING INSTALLATION

MECHANICAL VENTILATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Hot-dipped galvanised steel sheet ductwork and fittings ; DW/144 medium pressure ; BS EN 10346, Grade DX51D+Z, coating type Z275 ; off site prefabricated * thick ; rectangular ducts ; fixed to walls and columns A duct size not exceeding 400 (longer side)

( ACCD)

m2

B

duct size 401 - 600 (longer side) ( ACCD) * thick ; rectangular ducts ; suspended from soffits

m2

C

duct size not exceeding 400 (longer side)

( ACCD)

m2

D

duct size 401 - 600 (longer side) ( ACCD) Hot-dipped galvanised steel sheet ductwork and fittings ; DW/144 medium pressure ; BS EN 10346, Grade DX51D+Z, coating type Z275 ; off site prefabricated ; insulated externally (insulation measured separately) * thick ; rectangular ducts ; fixed to walls and columns

m2

E

duct size not exceeding 400 (longer side)

( ACCD)

m2

F

duct size 401 - 600 (longer side) ( ACCD) * thick ; rectangular ducts ; suspended from soffits

m2

G

duct size not exceeding 400 (longer side)

( ACCD)

m2

H

duct size 401 - 600 (longer side) ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/15

To C olle ction

$

AIR CONDITIONING INSTALLATION MECHANICAL VENTILATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Dampers ; galvanised mild steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Volume control dampers ; aerofoil, double skin, opposed blade low leakage type ; approved or accepted by FSD A * x * ( ACCD) nr

Fire or smoke dampers ; single-bladed ; * hour fire rated ; approved or accepted by FSD B * x * ( ACCD) nr

Motorized shut-off dampers ; * hour fire rated ; actuated by automatic fire detectors C * x * ( ACCD) nr

Dampers ; stainless steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Combined fire and smoke stop dampers ; aerofoil bladed ; * hour fire rated ; temperature exposure tested ; replaceable thermal actuator and fusible link D * x * Grilles ; aluminium Supply air grilles ; complete with two adjustable louvres ; opposed blade multi-leaf dampers E * x * ( ACCD) nr ( ACCD) nr

Exhaust air grilles ; complete with single louvre ; opposed blade multi-leaf dampers F * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/16

To C olle ction

$

AIR CONDITIONING INSTALLATION MECHANICAL VENTILATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Transfer air grilles ; complete with single louvre ; opposed blade multi-leaf dampers A * x * ( ACCD) nr

Diffusers ; aluminium ; pan type ; complete with volume control dampers Supply air grilles B * x * ( ACCD) nr

Washable panel filters ; heavy duty airtight factory fabricated, robust enclosure, holding frames and housing * thick ; washable panel filters and frames ; rolled or extruded C * x * ( ACCD) nr

Additional filters ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation * thick ; disposable panel filters ; bonded filter element ; for replacement of used filters during testing and commissioning D * x * * thick ; disposable panel filters ; bonded filter element ; for use by Employer's operation staff during Maintenance Period E * x * ( ACCD) nr ( ACCD) nr

* thick ; disposable panel filters ; bonded filter element ; for replacement of used filters before end of Maintenance Period F * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/17

To C olle ction

$

AIR CONDITIONING INSTALLATION MECHANICAL VENTILATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Additional filter media ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation Renewable panel filter media ; for use by Employer's operation staff during Maintenance Period A to suit * x * filters ( ACCD) nr

Galvanised steel mesh bird wires ; complete with all necessary framings 10 wire mesh B to suit * x * louvres ( ACCD) nr

Ductwork silencers ; galvanised steel inorganic mineral acoustic filler Silencers ; to rectangular ducts C silencers ; * long (ref.*) ( ACCD) nr

CFC and HCFC free phenolic foam board insulation ; * kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive * thick ; fixing externally to rectangular ductwork D generally ( ACCD) m2

Protective coverings and finishings ; hammer finish aluminium cladding to CFC and HCFC free phenolic foam insulation * thick ; fixing to * thick insulation for E rectangular ductwork ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/18

To C olle ction

$

AIR CONDITIONING INSTALLATION MECHANICAL VENTILATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Fire-rated enclosure ; complying Fire Safety Code ; complete with all necessary framings * hour fire-resistant-period enclosure ; BS 476-20 A to rectangular ducts ( ACCD) m2

Ventilating fans ; galvansied steel / aluminium alloy casings ; all accessories and mountings ; as described in the Particular Specification Ventilating fans ; * type ; noise assessment complying with EPD requirements B air volume flow rate * m3/s ; static pressure * kPa (ref. *) ( ACCD) Design, supply and install water scrubber ; fibreglass reinforced polyester resin (FRP) construction ; factory built and assembled unit ; scrubber section with knockdown baffles / packing, mist eliminator, scrubbing liquid distribution system ; fan, chemical feed pumps, chemical tanks, silencers ; instrumentation, acoustic enclosure, controls and all necessary components ; sensors, flow switch, local and remote control panels and all necessary control accessories ; connections to associated services ; as described in the Particular Specification and drawing nr. * Horizontal draw-through non-clogging venturi type ; connections to external control circuitry, pipework ; fan and ductwork C air flow rate * l/s (ref. *) ( ACCD) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/19

To C olle ction

$

AIR CONDITIONING INSTALLATION

KITCHEN EXTRACTION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Stainless steel sheet ductwork and fittings ; DW/144 medium pressure ; BS 1449, Part 2 ; Grade * ; * finish ; EN 10088 Part 2 ; off site prefabricated * thick ; rectangular ducts ; fixed to walls and columns A duct size not exceeding 400 (longer side)

( ACCD)

m2

B

duct size 401 - 600 (longer side) ( ACCD) * thick ; rectangular ducts ; suspended from soffits

m2

C

duct size not exceeding 400 (longer side)

( ACCD)

m2

D

duct size 401 - 600 (longer side) ( ACCD) Extract hoods ; stainless steel Grade 304 ; satin finish Extract hoods ; ceiling mounted ; fixed independent of ductwork, make-up air grilles ; lighting fittings, grease filters

m2

E

* thick ; overall size * x * x * ( ACCD) Dampers ; stainless steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Volume control dampers ; aerofoil, double skin, opposed blade low leakage type ; approved or accepted by FSD

nr

F

* x *

( ACCD)

nr

Fire or smoke dampers ; multi-bladed ; * hour fire rated ; approved or accepted by FSD G * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/20

To C olle ction

$

AIR CONDITIONING INSTALLATION KITCHEN EXTRACTION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Grilles ; steel, stove-enamelled finish Exhaust air grilles ; complete with single louvre ; opposed blade multi-leaf dampers A * x * ( ACCD) nr

Ductwork silencers ; galvanised steel inorganic mineral acoustic filler Silencers ; to rectangular ducts B silencers ; * long (ref. *) ( ACCD) nr

Ventilating fans ; galvanised steel / aluminium alloy casings ; all accessories and mountings ; as described in the Particular Specification and drawing nr. * Ventilating fans ; * type ; noise assessment complying with EPD requirements C air volume flow rate * m3/s ; static pressure * kPa (ref. *) ( ACCD) DESIGN, SUPPLY AND INSTALL SMOKE EXTRACTION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Hot-dipped galvanised steel sheet ductwork and fittings ; DW/144 medium pressure ; BS EN 10346, Grade DX51D+Z, coating type Z275 ; off site prefabricated * thick ; rectangular ducts ; fixed to walls and columns D duct size not exceeding 400 (longer side)

nr

( ACCD)

m2

E

duct size 401 - 600 (longer side) ( ACCD) * thick ; rectangular ducts ; suspended from soffits

m2

F

duct size not exceeding 400 (longer side)

( ACCD)

m2

G

duct size 401 - 600 (longer side) ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/21

To C olle ction

$

AIR CONDITIONING INSTALLATION DESIGN, SUPPLY AND INSTALL SMOKE EXTRACTION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Dampers ; stainless steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Combined fire and smoke stop dampers ; aerofoil bladed ; * hour fire rated ; temperature exposure tested ; replaceable thermal actuator and fusible link ; electric motor actuated ; FSD approved A * x * Grilles ; aluminium Exhaust air grilles ; complete with single louvre ; opposed blade multi-leaf dampers B * x * ( ACCD) nr ( ACCD) nr

Galvanised steel mesh bird wires ; complete with all necessary framings 10 wire mesh C to suit * x * louvres ( ACCD) nr

Ductwork silencers ; galvanised steel inorganic mineral acoustic filler Silencers ; to rectangular ducts D silencers ; * long (ref. *) ( ACCD) nr

Fire-rated enclosure ; complying Fire Safety Code ; complete with all necessary framings * hour fire-resistant-period enclosure ; BS 476-20 E to rectangular ducts ( ACCD) m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/22

To C olle ction

$

AIR CONDITIONING INSTALLATION DESIGN, SUPPLY AND INSTALL SMOKE EXTRACTION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Ventilating fans ; galvanised steel / aluminium alloy casings ; all accessories and mountings ; as described in the Particular Specification and drawing nr. * Ventilating fans ; * type ; * hour fire rated ; coated with finishing materials capable of withstanding exposure to temperature of 250 degrees Celsius for one (1) hour ; 1 hour (minimum) fire rated enclousure A air volume flow rate * m3/s ; static pressure * kPa (ref. *) ( ACCD) AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Hot-dipped galvanised steel sheet ductwork and fittings ; DW/144 medium pressure ; BS EN 10346, Grade DX51D+Z, coating type Z275 ; off site prefabricated ; insulated externally (insulation measured separately) * thick ; rectangular ducts ; suspended from soffits B duct size not exceeding 400 (longer side)

nr

( ACCD)

m2

C

duct size 401 - 600 (longer side) ( ACCD) Flexible ductwork ; BS 476-12 Rating Class P ; BS 476-6 performance index not exceeding 12 ; Part 7 Class 1 ; tear-resistant fabric liner and cover ; impregnated and coated with plastics Flexible ducts ; fixed to rigid ductwork or equipment spigots

m2

D

* diameter ; not exceeding 0.50m long ( ACCD) * diameter ; 0.51 - 1.00m long ( ACCD)

nr nr

E

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/23

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Galvanised mild steel plenum boxes ; factory fabricated ; complete with appropriate insulation Plenum boxes A B size * x * x * ( ACCD) nr nr

to suit external louvres ; * x * ( ACCD) Dampers ; galvanised mild steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Volume control dampers ; aerofoil, double skin, opposed blade low leakage type ; approved or accepted by FSD

C

* x *

( ACCD)

nr

Fire or smoke dampers ; multi-bladed ; * hour fire rated ; approved or accepted by FSD D * x * ( ACCD) nr

Motorized shut-off dampers ; * hour fire rated ; actuated by automatic fire detectors E * x * ( ACCD) nr

Dampers ; stainless steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Combined fire and smoke stop dampers ; aerofoil bladed ; * hour fire rated ; temperature exposure tested ; replaceable thermal actuator and fusible link F * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/24

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Grilles ; aluminium Supply air grilles ; complete with two adjustable louvres ; opposed blade multi-leaf dampers A * x * ( ACCD) nr

Return air grilles ; complete with single louvre ; opposed blade multi-leaf dampers B * x * ( ACCD) nr

Transfer air grilles ; complete with single louvre ; opposed blade multi-leaf dampers C * x * ( ACCD) nr

Diffusers ; aluminium ; pan type ; complete with volume control dampers Supply air diffusers D * x * ( ACCD) nr

Linear slot diffusers ; multiple slot ; complete with plenum and fibreglass insulation E * long ; * slots ( ACCD) nr

Dummy linear diffusers ; complete with demountable galvanised metal enclosure F * long ( ACCD) nr

Bag filters/cartridge filters ; heavy duty airtight factory fabrication, robust enclosure, holding frames and housing * thick ; bag filter ; microfine glass fibre and laminated synthetic backing ; factory assembled filter package G * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/25

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Washable panel filters ; heavy duty airtight factory fabrication, robust enclosure, holding frames and housing * thick ; washable panel filters and frames ; rolled or extruded A * x * ( ACCD) nr

High Efficiency Particulate Air (HEPA) filters ; glass microfibres ; heavy duty airtight factory fabrication, robust enclosure and holding frames * thick ; HEPA filters ; fungicidal and waterproofing properties B * x * ( ACCD) nr

Additional filters ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation * thick ; HEPA filters ; fungicidal and waterproofing properties ; for replacement of used filters during testing and commissioning C * x * ( ACCD) nr

* thick ; HEPA filters ; fungicidal and waterproofing properties ; for use by Employer's operation staff during Maintenance Period D * x * ( ACCD) nr

* thick ; HEPA filters ; fungicidal and waterproofing properties ; for replacement of used filters before end of Maintenance Period E * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/26

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Additional filter media ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation Automatic fabric roll filter media ; for use by Employer's operation staff during Maintenance Period A to suit * x * filters ( ACCD) nr

Cleaning detergent for washable type filters ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation Cleaning detergent packs ; for use by Employer's operation staff during Maintenance Period B 10 litres per washable filter installation

( ACCD)

-

item

-

Cleaning detergent packs ; provided before end of Maintenance Period C 10 litres per washable filter installation

( ACCD)

-

item

-

Fluid for viscous type filters ; as described in Section C1.21 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation Fluid packs ; recommended by filter manufacturer ; for use by Employer's operation staff during Maintenance Period D sufficient for one complete change ( ACCD) Fluid packs ; recommended by filter manufacturer ; provided before end of Maintenance Period E sufficient for one complete change ( ACCD)

-

item

-

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/27

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Activated oxygen air purifiers ; electromagnetic compatibility (EMC) compliance ; UL 867 Activated oxygen air purifiers ; factory fabricated and assembled ; screw-in electrode, power generator, control device and unit ; switches ; support brackets and stiffeners A * x * ; suitable for duct mounting ( ACCD) Ultra-violet sterilizing lights ; UV tubes ; tube fitting set ; electric supply unit and monitoring unit ; UL 153 and UL 1598 Ultra-violet sterilizing lights ; emitter tube, power generator, built-in regulators B * x * ( ACCD) nr

nr

Washing facilities for washable filters ; filter cleaning tank ; 1 thick (minimum) stainless steel AISI 316 ; duplicate cleaning tanks ; complete with 18 diameter drain cock and external handles Filter duplicate cleaning tank sets C * x * x 400 ( ACCD) nr

Galvanised steel mesh bird wires ; complete with all necessary framings 10 wire mesh D to suit * x * louvres ( ACCD) nr

Ductwork silencers ; galvanised steel inorganic mineral acoustic filler Silencers ; to rectangular ducts E silencers ; * long (ref. *) ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/28

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) CFC and HCFC free phenolic foam board insulation ; * kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive * thick ; fixing externally to rectangular ductwork A generally ( ACCD) m2

Protective coverings and finishings ; hammer finish aluminium cladding to CFC and HCFC free phenolic foam insulation * thick ; fixing to * thick insulation for B rectangular ductwork ( ACCD) m2

Fire-rated enclosure ; complying Fire Safety Code ; complete with all necessary framings * hour fire-resistant-period enclosure ; BS 476-20 C to rectangular ducts ( ACCD) m2

Air handling units (AHUs) ; ISO 9001 ; 'type' tested ; with all components from one manufacturer ; including fans, coils, steam humidifiers, access doors, air filters, thermal and acoustic insulation ; galvanised steel casing ; as described in the Particular Specification and drawing nr. * Air handling units (AHU) ; rigid double skin fully modular construction ; floor mounted D supply air volume flow rate * m3/s ; total cooling capacity * kW (ref. *) ( ACCD) Primary air handling unit (PAU) ; floor mounted E supply air volume flow rate * m3/s ; total cooling capacity * kW ; total heating capacity * kW (ref. *) ( ACCD)

nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/29

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Fan coil units (FCU) ; ISO 9001 ; complete with fans, air filters, coils, motors, electric heater, high grade AISI 316 stainless steel drain pans ; all necessary components ; galvanised steel / plastic / reinforced glass fibre / corrosion resistant casings and mountings ; thermal and acoustic insulation ; as described in the Particular Specification and drawing nr. * Fan coil units (FCU) ; cooling ; ceiling mounted A supply air volume flow rate * m3/s ; total cooling capacity * kW (ref. *) ( ACCD) Ventilating fans ; galvanised steel / aluminium alloy casings ; all accessories and mountings ; as described in the Particular Specification and drawing nr. * Ventilating fans ; * type ; noise assessment complying with EPD requirements B air volume flow rate * m3/s ; static pressure * kPa (ref. *) ( ACCD) UNITARY AIR CONDITIONING SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Copper pipes and fittings ; BS EN 1057 (light gauge) ; union or screwed joints ; off-site pre-fabricated metal mounting and fixing brackets Pipework and fittings ; between VRV condensing unit (ref. *) and * nr. direct expansion units (ref. *) ; fixed to walls and columns C D liquid refrigerant pipes suction pipes ( ACCD) ( ACCD) m m

nr

nr

Pipework and fittings ; between VRV condensing unit (ref. *) and * nr. direct expansion units (ref. *) ; suspended from soffits E liquid refrigerant pipes ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/30

To C olle ction

$

AIR CONDITIONING INSTALLATION UNITARY AIR CONDITIONING SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A suction pipes ( ACCD) m

CFC free flexible closed cell elastomeric insulation ; 65 kg/m3 density ; Class "O" fire rating ; factory applied talc coating / on site applied talc coating on inner surface ; vapour barrier sealed ; fixing with approved adhesive ; protection finish coats recommended by manufacturer * thick ; fixing externally to pipework and fittings ; between VRV condensing unit (ref. *) and * nr. direct expansion units (ref. *) B C liquid refrigerant pipes suction pipes ( ACCD) ( ACCD) m m

Protective coverings and finishings ; recommended by manufacturer * thick ; fixing to * thick insulation for D E liquid refrigerant pipes suction pipes ( ACCD) ( ACCD) m m

Variable refrigerant volume (VRV) system ; multi-zone modular split type ; each zone with one air-cooled outdoor condensing unit and a group of fan coil units ; all necessary components and adequate insulations ; direct expansion units ; as described in the Particular Specification and drawing nr. * Direct expansion units ; reverse cycle ; ceiling mounted F total cooling capacity * kW ; total heating capacity * kW (ref. *) ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/31

To C olle ction

$

AIR CONDITIONING INSTALLATION UNITARY AIR CONDITIONING SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Variable refrigerant volume (VRV) system ; multi-zone modular split type ; each zone with one air-cooled outdoor condensing unit and a group of fan coil units ; all necessary components and adequate insulations ; air cooled condensing units ; frequency inverted control ; as described in the Particular Specification and drawing nr. * Air cooled condensing units ; complete with exhaust hood A to match * nr. direct expansion units (ref. *) ( ACCD) Hot-dipped galvanised steel sheet ductwork and fittings ; DW/144 medium pressure ; BS EN 10346, Grade DX51D+Z, coating type Z275 ; off site prefabricated ; insulated externally (insulation measured separately) * thick ; rectangular ducts ; fixed to walls and columns B duct size not exceeding 400 (longer side)

nr

( ACCD)

m2

C

duct size 401 - 600 (longer side) ( ACCD) * thick ; rectangular ducts ; suspended from soffits

m2

D

duct size not exceeding 400 (longer side)

( ACCD)

m2

E

duct size 401 - 600 (longer side) ( ACCD)

m2

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/32

To C olle ction

$

AIR CONDITIONING INSTALLATION UNITARY AIR CONDITIONING SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Dampers ; galvanised mild steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Volume control dampers ; aerofoil, double skin, opposed blade low leakage type ; approved or accepted by FSD A * x * ( ACCD) nr

Fire or smoke dampers ; multi-bladed ; * hour fire rated ; approved or accepted by FSD B * x * ( ACCD) nr

Motorized shut-off dampers ; * hour fire rated ; actuated by automatic fire detectors C * x * ( ACCD) nr

Dampers ; stainless steel ; DW/144 ; CIBSE Commissioning Code Series A and BSRIA Application Guide ; flanged type ; air leakage rate to BS EN 1751 ; padlocking facilities ; position indicators Combined fire and smoke stop dampers ; aerofoil bladed ; * hour fire rated ; temperature exposure tested ; replaceable thermal actuator and fusible link D * x * Grilles ; aluminium Supply air grilles ; complete with two adjustable louvres ; opposed blade multi-leaf dampers E * x * ( ACCD) nr ( ACCD) nr

Return air grilles ; complete with single louvre ; opposed blade multi-leaf dampers F * x * ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/33

To C olle ction

$

AIR CONDITIONING INSTALLATION UNITARY AIR CONDITIONING SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Transfer air grilles ; complete with single louvre ; opposed blade multi-leaf dampers A * x * ( ACCD) nr

Washable panel filters ; heavy duty airtight factory fabrication ; robust enclosure, holding frames and housing * thick ; washable panel filters and frames ; rolled or extruded B * x * ( ACCD) nr

CFC and HCFC free phenolic foam board insulation ; * kg/m3 density ; Class "O" fire rating ; factory applied double sided reinforced foil vapour barrier ; fixing with approved adhesive * thick ; fixing externally to rectangular ductwork C generally ( ACCD) m2

Protective coverings and finishings ; hammer finish aluminium cladding to CFC and HCFC free phenolic foam insulation * thick ; fixing to * thick insulation for D rectangular ductwork ( ACCD) m2

Design, supply and install maintenance servicing platform ; rigid galvanised mild steel construction ; railings, steel cat ladder and safety wings ; well protected against corrosion Servicing platform E for unitary air-conditioners ; approximate size * x * x *

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/34

To C olle ction

$

AIR CONDITIONING INSTALLATION

ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Design, supply and install low voltage motor control switchboard (ref. *) complete with cubicle, interconnecting ancillaries and schematic diagram ; multi-cubicle type ; type tested IEC 60439-1 ; IP31, floor mounted ; located in plant room ; comprising the following:Horizontally withdrawable type air circuit breakers (ACBs) ; IEC 60947-2 ; fully metalclad with earth terminals ; complete with * D.C. shunt trip coils ; electrical and mechanical interlocking devices ; padlocking facilities and keys A * A ; four poles ( ACCD) nr

Moulded case circuit breakers (MCCBs) ; IEC 60947-2 ; not less than * kA breaking capacity ; handle lock attachment complete with padlock and three keys B * A ; four pole ( ACCD) nr

Fuse-switch ; complying Code of Practice for the Electricity (Wiring) Regulations (Cap.406E) ; TPN C * A Relays D E overload protection earth leakage protection Meters F G power factor meters ( ACCD) nr ( ACCD) ( ACCD) nr nr ( ACCD) nr

ammeters ; complete with ammeter selector switch for phase selection ( ACCD) voltmeters ; complete with voltmeter selector switches for phase selection ( ACCD) Current transformers ; for ammeters

nr

H

nr

J

* A/5A

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/35

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Current transformers ; for protection A * A/5A HRC fuses ; complete with carriers B * A Link ; neutral C approved type Indicating lamps ; * V DC ; built-in transformers D indication lamps ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr

Busbars ; hard drawn high conductivity copper ; BS EN 13601, electro-tinned ; TPN ; enclosed inside motor control switchboard E * A ( ACCD) nr

Motor control switchboard cubicle ; self supporting ; steel construction ; back detachable panels, mounting brackets ; cable supports ; durable nameplates and finishes F overall size *m long x *m wide x *m high ( ACCD) Allow for the provision of the following items G all interconnecting, control and ancillary wiring for motor control switchboard ( ACCD) copper earth bars of ample size including fixings, connections and all necessary earthing and bonding accessories for motor control switchboard ( ACCD) anti-condensation heaters and thermostats

nr

-

item

-

H

-

item

-

J

( ACCD)

-

item item

-

K

completion tests and inspection ( ACCD)

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/36

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A hydraulic operated handling truck for handling air circuit breakers and all necessary accessories ( ACCD) set of portable earthing equipment for each main incoming air circuit breaker ( ACCD) battery chargers/batteries system ; automatic trickle type battery chargers with manual booster ; nickel-cadmium batteries ; voltmeters ; ammeters ; and battery test facilities ; internal wiring ( ACCD) operating handles ; jigs and the like for fixing and removal of the detachable panels and normal charging, closing, opening, racking in and out operation of all circuit breakers complete with brass hooks and fixing boards ( ACCD) insulation mats ; on floors in front of and at the rear of the motor control cubicle switchboard ; length to suit the switchboard ( ACCD) complete set of fuses for each rating of fuses in all switch-fuses and fuse-switches complete with fixing wooden board ( ACCD) Schematic diagram in * G schematic wiring diagram for motor control switchboard mounted on frame with transparent perspex ; fixing adjacent to the motor control switchboard ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/37

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Moulded case circuit breaker (MCCB) distribution boards ; rust proofed sheet metal construction ; IEC 60439-1 and IEC 60439-3 ; ingress protection IP41 ; spare ways provision ; Type A ; busbars ; integral main isolating switches (MCCBs measured separately) MCCB distribution boards ; triple-pole ; rated short circuit withstand current not less than * kA ; fixed to walls and columns A B * way ; * A nr blanking plates for spare ways ( ACCD) ( ACCD) nr nr

Moulded case circuit breakers (MCCBs) MCCBs ; * pole ; IEC 60947-2, IP30 protection ; rated short circuit breaking capacity not less than * kA ; facility for padlocking ; fixed in distribution boards C * A ( ACCD) nr

MCCBs ; * pole ; IEC 60947-2, IP30 protection ; rated short circuit breaking capacity not less than * kA ; facility for padlocking ; fixed to walls and columns D E For pumps E * kW For ventilating fans F * kW ( ACCD) nr ( ACCD) nr * A ( ACCD) nr

Switches, switchfuses, fuseswitches ; complying Code of Practice for the Electricity (Wiring) Regulations (Cap.406E) ; air-break type contacts Switches ; TPN ; for MCCB boards ; fixed to walls and columns G * A ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/38

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Fuseswitches ; TPN ; for equipment ; fixed to walls and columns A * A ( ACCD) nr

Automatic power factor correction capacitor ; floor mounting cubicle type Capacitor bank, static primary capacitor units, associated equipment B * kVAR ( ACCD) nr

Contactors ; complying Code of Practice for the Electricity (Wiring) Regulations (Cap.406E) Contactors C * A ; to suit fan coil units (ref. *) ( ACCD) Motor starters ; air-break triple-pole electro-magnetic type, IEC 60947-4-1 or IEC 60470 Direct on line (DOL) starters D * A ; to suit ventilating fans (ref. *) Star-delta starters E * A ; to suit fresh water condenser water pumps (ref. *) ( ACCD) * A ; to suit ventilating fans (ref. *)

nr

( ACCD)

nr

nr

F

( ACCD)

nr nr

G H

* A ; to suit chillers (ref. *) ( ACCD) * A ; to suit chilled water pumps (ref. *) ( ACCD) * A ; to suit cooling towers (ref. *) ( ACCD) * A ; to suit air handling units (ref. *) ( ACCD)

nr

J

nr

K

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/39

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Power supply cables ; */* V XLPE-insulated ; galvanised steel wires armoured ; PVC sheathed copper conductors Power supply cables ; from motor control switchboard (ref. *) to local motor control panels (ref. *) for ACMV equipment ; fixed to cable trays or cable ladders (motor control switchboard, local motor control panel, cable trays and cable ladders measured separately) A * mm2 ; * core cables ( ACCD) m

Termination glands ; non-ferrous mechanical type ; BS EN 50262 ; accommodated in auto-transformer cable boxes B * mm2 ; * core cables ( ACCD) nr

Final circuits ; approved power supply cables ; drawn into and including conduit/trunking ; all necessary cabling facilities ; fixing and earth continuity From cooling tower local control panel (ref. *) C * x * mm2 ; * core cables ; to cooling towers (ref. *)

( ACCD)

nr

From fresh water pump local control panel (ref. *) D * x * mm2 ; * core cables ; to fresh water condenser water pumps (ref. *) ( ACCD) From chiller local control panel (ref. *) E * x * mm2 ; * core cables ; to chillers (ref. *)

nr

( ACCD)

nr

From chilled water pump local control panel (ref. *) F * x * mm2 ; * core cables ; to chilled water pumps (ref. *)

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/40

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) From VRV split type packaged unit local control panel (ref. *) A * x * mm2 ; * core cables ; to VRV ; direct expansion units (ref. *) ( ACCD) * x * mm2 ; * core cables ; to VRV ; air cooling condensing units (ref. *) ( ACCD) From isolators (isolators measured separately) C * x * mm2 ; * core cables ; to ventilating fans (ref. *) * x * mm2 ; * core cables ; to water scrubbers (ref. *)

nr

B

nr

( ACCD)

nr

D

( ACCD)

nr

E

* x * mm2 ; * core cables ; to air handling units (ref. *) ( ACCD) From fused spur units (fused spur units measured separately)

nr

F

* x * mm2 ; * core cables ; to ventilating fans (ref. *)

( ACCD)

nr

G

* x * mm2 ; * core cables ; to fan coil units (ref. *) ( ACCD) Perforated steel trays and fittings to BS EN 10149-1 ; hot dipped galvanised to ISO 1460 and ISO 1461 Trays and fittings ; fixed to walls and columns

nr

H

* wide Trays and fittings ; suspended from soffits

( ACCD)

m

J

* wide Extra over * wide trays for

( ACCD)

m

K L

bends tees

( ACCD) ( ACCD)

nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/41

To C olle ction

$

AIR CONDITIONING INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A reducing tees ( ACCD) nr

CONTROL SYSTEM - AUTOMATIC CONTROL SYSTEM (ACS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control panels, hairline finished stainless steel construction ; complete with indicating lights, ammeters, gauges, control switches, motor starters, contactors (motor starters and contactors measured separately), push buttons, alarm chimes, alarm indicating lights ; alarm mute buttons, control wiring ; flush galvanised iron supports and accessories and other necessary equipment to enable remote operation and monitoring of all A/C equipment ; all other necessary instrument and accessories ; as described in the Particular Specification and drawing nr. * 1.5 thick main control panel ; floor mounted type B located in * room ; main control panel (ref. *) ( ACCD) Steel control panels, factory built assemblies, self supporting and framing, IP44 protection ; complete with indicating lamps, ammeters, voltmeters, relays, timers, selectors, control switches, motor starters, contactors (motor starters and contactors measured separately), control wiring and other necessary equipment to enable remote operation and monitoring of all A/C equipment ; all other necessary instrument and accessories ; as described in the Particular Specification and drawing nr. * 1.6 thick local control panel ; wall mounted type C located in * room ; cooling tower local control panel (ref. *) ( ACCD) located in * room ; fresh water pump local control panel (ref. *) ( ACCD)

nr

nr

D

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/42

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - AUTOMATIC CONTROL SYSTEM (ACS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A located in * room ; chiller local control panel (ref. *) ( ACCD) located in * room ; chilled water pump local control panel (ref. *) ( ACCD) located in * room ; fan local control panel (ref. *)

nr

B

nr

C

( ACCD)

nr

D

located in * room ; fan coil unit local control panel (ref. *) ( ACCD) located in * room ; AHU local control panel (ref. *)

nr

E

( ACCD)

nr

F

located in * room ; VRV split type packaged unit local control panel (ref. *) ( ACCD) located in * room ; VAC local control panel (ref. *)

nr

G

( ACCD)

nr

Design, supply and install steel control panels, type tested cubicle ; to BS EN 61439-1 and BS EN 61439-2 ; complete with indicating lamps, ammeters, voltmeters, relays, timers, selectors, control switches, motor starters, contactors (motor starters and contactors measured separately), fire resistant cables, control wiring and other necessary equipment to enable remote operation and monitoring of A/C equipment ; all other necessary instrument and accessories ; as described in the Particular Specification and drawing nr. * 2 thick control panels ; wall mounted type H located in * room ; smoke extraction system local control panel (ref. *) ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/43

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - AUTOMATIC CONTROL SYSTEM (ACS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Electrical control circuits ; associated with ACMV equipment ; connections to control panels (control panels measured separately) ; interconnecting wiring, cables, conduits, cabling facilities ; relays, contactors, sensors and control devices ; all necessary instrument and accessories From main control panel (ref. *) A to cooling tower local control panel (ref. *)

( ACCD)

nr

B

to fresh water pump local control panel (ref. *) ( ACCD) to chiller local control panel (ref. *) to chilled water pump local control panel (ref. *)

nr

C

( ACCD)

nr

D

( ACCD)

nr

E

to fan local control panel (ref. *) ( ACCD) to fan coil unit local control panel (ref. *)

nr

F

( ACCD)

nr

G

to AHU local control panel (ref. *) ( ACCD) to VRV split type packaged unit local control panel (ref. *) ( ACCD) to VAC local control panel (ref. *) ( ACCD) to smoke extraction system local control panels (ref. *) ( ACCD) to pressurization of staircases system local control panels (ref. *) ( ACCD) From cooling tower local control panel (ref. *)

nr

H

nr

J

nr

K

nr

L

nr

M

to cooling towers (ref. *)

( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/44

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - AUTOMATIC CONTROL SYSTEM (ACS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) From fresh water pump local control panel (ref. *) A to fresh water condenser water pumps (ref. *)

( ACCD)

nr

From chiller local control panel (ref. *) B to chillers (ref. *) ( ACCD) nr

From chilled water pump local control panel (ref. *) C to chilled water pumps (ref. *) ( ACCD) From fan local control panel (ref. *) D to ventilating fans (ref. *) ( ACCD) nr nr

From fan coil unit local control panel (ref. *) E to fan coil units (ref. *) ( ACCD) nr

From AHU local control panel (ref. *) F to air handling units (ref. *) ( ACCD) nr

From VRV split type packaged unit local control panel (ref. *) G to VRV ; direct expansion units (ref. *) ( ACCD) to VRV ; air cooling condensing units (ref. *) ( ACCD) From VAC local control panel (ref. *) J K to ventilating fans (ref. *) to air handling units (ref. *) ( ACCD) ( ACCD) nr nr

nr

H

nr

From smoke extraction system local motor control panels (ref. *) L to ventilating fans (ref. *) ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/45

To C olle ction

$

AIR CONDITIONING INSTALLATION

CONTROL SYSTEM - CENTRAL CONTROL AND MONITORING SYSTEM (CCMS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Central equipment ; complete with all components and accessories ; including interfacing, interconnecting and internal wirings, jointing and making all busbars, cables, conduits, fixings ; as described in the Particular Specification and drawing nr. * Central equipment ; housed in the central control console A B C D E F general purpose controller monitor printer central database repository gateway/interfacing units ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr

server ; ANSI/ASHRAE standard 135 ( ACCD) router Central control console for housing equipment ; fixing and support ( ACCD)

nr nr

G

H

located in * room

( ACCD)

nr

CCMS operator workstation ; ANSI/ASHRAE standard 135 ; with BTL listed J K L M personal computer mouse and keyboard minimum 21" monitor ( ACCD) ( ACCD) ( ACCD) nr nr nr

A3 ink printer capable of handling continuous paper ( ACCD) A3 laser printer capable of handling continuous paper

nr

N

( ACCD)

nr

P

A 16-bit/full duplex audio system complete with speakers ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/46

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - CENTRAL CONTROL AND MONITORING SYSTEM (CCMS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Software and back-up copies ; as described in the Particular Specification A generally ( ACCD) item -

Uninterrupted power supply ; supplying power with suitable capacity not less than one hour ; complete with batteries and chargers ; supply and interconnecting wiring ; as described in the Particular Specification B backup for CCMS ( ACCD) item -

Intercommunication wiring network for data transmission ; approved cable ; including conduit, trunking and accessories C from central equipment to all peripheral equipment between peripheral equipment

( ACCD) ( ACCD)

-

item item

-

D

Wiring network ; standard network support, remote communication, system expansion and support on open system protocols ; as described in the Particular Specification Wiring network E F G H J general network level 1 network level 2 network level 3 network local area network (LAN) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) item item item item item -

Portable terminal hardware ; as described in the Particular Specification Portable terminal hardware ; complete with power supply unit and all necessary components and accessories ; rechargeable battery K generally ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/47

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - CENTRAL CONTROL AND MONITORING SYSTEM (CCMS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) DDC units/unitary controllers ; as described in the Particular Specification and drawing nr. * DDC units ; complete with power supply units and all necessary components and accessories ; all necessary internal wirings and fixings A DDC units/unitary controllers (ref. *)

( ACCD)

nr

Control and monitoring circuits ; approved cables ; conduit and cabling facilities ; all necessary sensors, relays, contactors, control devices and instrument ; earth continuity and terminations From DDC units/unitary controllers (ref. *) B C D E F G H J K L M N to chiller water circuits to cooling towers to chillers to chilled water pumps to motor control centre to AHU to PAU to ventilation fans to FCU to fire dampers to smoke/fire dampers to chilled water feed and expansion tank to water treatment ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr nr nr nr nr nr nr

( ACCD) ( ACCD)

nr nr

P Q

to room condition monitoring for * ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/48

To C olle ction

$

AIR CONDITIONING INSTALLATION CONTROL SYSTEM - CENTRAL CONTROL AND MONITORING SYSTEM (CCMS) ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A to cooling energy monitoring ( ACCD) nr

From DDC units/unitary controllers (ref. *) ; for other CCMS sub-system B C D E F G H to ACMV monitoring and control ( ACCD) nr nr nr nr nr nr

to electrical system monitoring ( ACCD) to lighting control to emergency generators to fire pumps to sprinkler valves to security installation monitoring to lifts to escalators ( ACCD) ( ACCD) ( ACCD) ( ACCD)

( ACCD) ( ACCD) ( ACCD)

nr nr nr

J K L

to mechanical pumping and plumbing control and monitoring ( ACCD) to normal, emergency and preventive maintenance notification and works ordering ( ACCD) to IAQ measurement ( ACCD)

nr

M

nr nr

N

AIR CONDITIONING SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole ACMV Installation Allow for P marking the positions of holes, mortices, chases and the like in the structure ( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/49

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A inspection, testing and commissioning of the complete ACMV Installation ; all as described in the Particular Specification and Part H of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD) providing all necessary power and water, diesel, gas and fuels in connection with testing, commissioning and maintenance ( ACCD) disinfection of the whole air duct installation before handover including supplying / providing ten bottles of one litre approved distinfection agent ( ACCD) cleaning interior of all ductwork by rotating mechanical brush and removing contaminants by high efficiency vacuum pumps ( ACCD) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/50

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing sample boards as described in Section A3.7 of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD) providing mock-ups and prototypes ( ACCD) supplying pipe sleeves as described in Section B9.10.6 for fixing by other trades through walls, floors and ceilings ( ACCD) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying and fixing fire stopping to walls and floors ( ACCD) Allow for the requirements on indoor air quality (IAQ) attainment G providing air cleaning, treatment and conditioning, testing and commissioning of the indoor air quality (IAQ) installation, assessments and measurements ; all as described in the Particular Specification and Part D of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD) providing training, operation and maintenance requirements for IAQ installation ; all as described in the Particular Specification and Part D of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

-

item

-

H

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/51

To C olle ction

$

AIR CONDITIONING INSTALLATION AIR CONDITIONING SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing indoor air quality (IAQ) certification by IAQ CIB and registration of IAQ certificates ; all as described in the Particular Specification ( ACCD) Allow for providing all operation and maintenance services during Maintenance Period ; as described in Part I of the General Specification for Air-conditioning, Refrigeration, Ventilation and Central Monitoring and Control System Installation B Level Two Services ; maintenance responsibilities comprising mandatory responsibilities required under Level One Services described in Part I I.2 ( ACCD) Level Two Services ; maintenance responsibilities comprising full and comprehensive maintenance described in Part I I.3.1 ( ACCD) Level Two Services ; maintenance responsibilities comprising full and comprehensive maintenance described in Part I I.3.4 ( ACCD) Level Two Services ; maintenance responsibilities comprising full and comprehensive maintenance described in Part I I.3.6 ( ACCD)

-

item

-

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/52

To C olle ction

$

AIR CONDITIONING INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.22/1 MODBQ.22/2 MODBQ.22/3 MODBQ.22/4 MODBQ.22/5 MODBQ.22/6 MODBQ.22/7 MODBQ.22/8 MODBQ.22/9 MODBQ.22/10 MODBQ.22/11 MODBQ.22/12 MODBQ.22/13 MODBQ.22/14 MODBQ.22/15 MODBQ.22/16 MODBQ.22/17 MODBQ.22/18 MODBQ.22/19 MODBQ.22/20 MODBQ.22/21 MODBQ.22/22 MODBQ.22/23 MODBQ.22/24 MODBQ.22/25 MODBQ.22/26 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... C.fwd $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/53

AIR CONDITIONING INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.22/27 MODBQ.22/28 MODBQ.22/29 MODBQ.22/30 MODBQ.22/31 MODBQ.22/32 MODBQ.22/33 MODBQ.22/34 MODBQ.22/35 MODBQ.22/36 MODBQ.22/37 MODBQ.22/38 MODBQ.22/39 MODBQ.22/40 MODBQ.22/41 MODBQ.22/42 MODBQ.22/43 MODBQ.22/44 MODBQ.22/45 MODBQ.22/46 MODBQ.22/47 MODBQ.22/48 MODBQ.22/49 MODBQ.22/50 MODBQ.22/51 MODBQ.22/52 B.fwd ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... C.fwd $ $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/54

AIR CONDITIONING INSTALLATION C O L L E C T I O N Bill Nr. MODBQ.22 - AIR CONDITIONING INSTALLATION To Summary $ B.fwd $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.22/55

Bill Nr. MODBQ.23 FIRE SERVICE INSTALLATION FIRE HYDRANT AND HOSEREEL SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Galvanised mild steel pipes ; medium grade (minimum) ; BS EN 10255 / ISO 65 ; fittings ; BS EN 10241 / BS EN 10242 ; flanged joints ; factory-applied Pipework and fittings ; suspended from soffits A * diameter (FS) m

Pipework and fittings ; fixed to walls and columns B * diameter Extra over pipework for C D E * bends * tees * reducing tees (FS) (FS) (FS) nr nr nr (FS) m

Galvanised mild steel pipes ; heavy grade (minimum) ; BS EN 10255 / ISO 65 ; fittings ; BS EN 10241 / BS EN 10242 ; pressure rating greater than system working pressure ; flanged joints ; factory-applied Pipework and fittings ; suspended from soffits F * diameter (FS) m

Pipework and fittings ; fixed to walls and columns G * diameter Extra over pipework for H J * bends * tees (FS) (FS) nr nr (FS) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/1

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE HYDRANT AND HOSEREEL SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A * reducing tees (FS) nr

Carbon steel pipes ; grade P195TR1 to BS EN 10216-1 and BS EN 10217-1 ; fittings ; BS EN 10253-1 ; flanged joints ; factory-applied Pipework and fittings ; suspended from soffits B * diameter (FS) m

Pipework and fittings ; fixed to walls and columns C * diameter Extra over pipework for D E F G * bends * reducing bends * tees * reducing tees (FS) (FS) (FS) (FS) nr nr nr nr (FS) m

Flow and return header pipes ; blanked off at open ends ; supporting on floors H * diameter ; * long ; with * nr. * x * x * branches (FS) Cast iron / ductile iron body valves ; heavy duty Gate valves J * diameter (FS) nr

nr

Non-return valves / check valves ; BS EN 1561 / BS EN 1563 K * diameter (FS) nr

Pressure reducing valve sets ; BS EN 1567 ; spring-loaded relay-operated type ; integral strainers ; isolating and bypass valves L to suit * diameter pipes (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/2

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE HYDRANT AND HOSEREEL SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Cast gummetal / bronze body valves Ball float valves ; slow closing ; minimum PN10 pressure rating A to suit * diameter pipes Drain valves/cocks B * diameter Cast iron body strainers Pipeline strainers ; Y-type ; brass screen C * diameter Gummetal / brass automatic air vents ; stainless steel floats and guides ; non-corrodible valves and seats Automatic air vents ; complete with integral lock-shield valves / valves with suitable locking device and air release pipe D to suit * diameter pipes Orifice plates LPCB or UL approved type E to suit system balancing Vortex inhibitors LPCB approved type ; operation under positive head conditions F to suit * diameter pipes (FS) nr (FS) nr (FS) nr (FS) nr (FS) nr (FS) nr

Expansion joints ; stainless steel ; BS EN 10088-1 No. 1.4401 ; working life twenty years (minimum) Axial pattern bellow type ; with liners ; external protective sleeves G to suit * diameter pipes (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/3

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE HYDRANT AND HOSEREEL SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Hydrant outlets ; gunmetal construction ; screw-down globe type stop valves ; necessary fittings Single type ; housed in cabinet A 65 diameter outlets with suitable bore screwed inlets

(FS)

nr

Fire services inlets ; gunmetal construction ; screw-down globe type stop valves ; integral spring loaded resilient seated non-return valves ; necessary fittings Twin type ; housed in cabinet B 65 diameter inlets with suitable bore screwed outlets

(FS)

nr

Hose reels ; die cast light alloy drums ; brass hub and shaft ; necessary fittings and supporting brackets ; sheet metal boxes for hose reel nozzles ; padlocks and keys Fixed type ; housed in cabinet C FSD approved type ; not less than 19 internal bore and 30m long ; reinforced rubber hoses ; copper alloy nozzles Pressure gauges ; BS EN 837-1 ; brass cases and dials ; siphon pipework and connections ; isolating valves/cocks Pressure gaugesto suit * diameter pipes D to suit * diameter pipes Water flow alarm switches ; magnetic / vane type ; pipework and connection Water flow alarm switches ; LPCB approved type ; capable of standing 1600 kPa (minimum) test pressure E to suit * diameter pipes (FS) nr (FS) nr

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/4

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE HYDRANT AND HOSEREEL SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pumps sets ; cast iron casings ; driving motor ; water seal connection, vents, drains, priming plugs, associated pipework and anti-vibration mountings ; adjacent emergency stops ; all necessary components and accessories Horizontal spindle type centrifugal pumps ; actuated by manual fire call point A duty pump sets ; capable of delivering * l/s at * kPa static pressure (ref. *) standby pump sets ; capable of delivering * l/s at * kPa static pressure (ref. *)

(FS)

nr

B

(FS)

nr

C

jockey pump sets ; complying Building Energy Code ; capable of delivering * l/s at * kPa static pressure (ref. *) (FS) AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Galvanised mild steel pipes ; medium grade (minimum) ; BS EN 10255 / ISO 65 ; fittings ; BS EN 10241 / BS EN 10242 ; flanged joints ; factory applied Pipework and fittings ; suspended from soffits

nr

D

* diameter

(FS)

m

Pipework and fittings ; fixed to walls and columns E * diameter Extra over pipework for F G H * bends * tees * reducing tees (FS) (FS) (FS) nr nr nr (FS) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/5

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Galvanised mild steel pipes ; heavy grade (minimum) ; BS EN 10255 / ISO 65 ; fittings ; BS EN 10241 / BS EN 10242 ; pressure rating greater than system working pressure ; flanged joints ; factory applied Pipework and fittings ; suspended from soffits A * diameter (FS) m

Pipework and fittings ; fixed to walls and columns B * diameter Extra over pipework for C D E * bends * tees * reducing tees (FS) (FS) (FS) nr nr nr (FS) m

Carbon steel pipes ; grade P195TR1 to BS EN 10216-1 and BS EN 10217-1 ; fittings ; BS EN 10253-1 ; flanged joints ; factory-applied Pipework and fittings ; suspended from soffits F * diameter (FS) m

Pipework and fittings ; fixed to walls and columns G * diameter Extra over pipework for H J K L * bends * reducing bends * tees * reducing tees (FS) (FS) (FS) (FS) nr nr nr nr (FS) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/6

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Flow and return header pipes ; blanked off at open ends ; supporting on floors A * diameter ; * long ; with * nr. * x * x * branches (FS) Cast gummetal / bronze body valves Drain valves/cocks B * diameter Cast iron / ductile iron body valves ; heavy duty Gate valves C * diameter (FS) nr (FS) nr

nr

Non-return valves / check valves ; BS EN 1561 / BS EN 1563 D * diameter Cast iron body strainers Pipeline strainers ; Y-type ; brass screen E * diameter (FS) nr (FS) nr

Brass automatic air vents ; stainless steel floats and guides ; non-corrodible valves and seats Automatic air vents ; complete with integral lock-shield valves / valves with suitable locking device and air release pipe F to suit * diameter pipes Orifice plates LPCB or UL approved type G to suit system balancing (FS) nr (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/7

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Vortex inhibitors LPCB approved type ; operation under positive head conditions A to suit * diameter pipes (FS) nr

Expansion joints ; stainless steel ; BS EN 10088-1 No. 1.4401 ; working life twenty years (minimum) Axial pattern bellow type ; with liners ; external protective sleeves B to suit * diameter pipes (FS) nr

Sprinklers/sprinkler heads ; quick response ; yoke arm, escutcheon, adaptor and cover plate ; chromium plated finish Heat sensitive quartzoid bulb ; temperature rating 68 degrees Celsius C pendant type (FS) nr

Sprinklers/sprinkler heads ; quick response ; yoke arm, escutcheon, adaptor and cover plate ; polyester white colour finish Heat sensitive quartzoid bulb ; temperature rating 68 degrees Celsius D flush pattern, pendant type (FS) nr

Sprinklers/sprinkler heads ; quick response ; yoke arm, escutcheon, adaptor and cover plate ; natural brass finish Heat sensitive quartzoid bulb ; temperature rating 68 degrees Celsius E upright type (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/8

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Sprinkler inlets ; gunmetal construction ; screw-down globe type stop valves ; integral spring loaded resilient seated non-return valves ; necessary fittings Twin type ; housed in cabinet A 65 diameter inlets with suitable bore screwed outlets

(FS)

nr

Sprinkler guards ; corrosion resistance ; brass, wax coated Fixed to sprinkler pipes B 65 high (maximum) Pressure gauges ; BS EN 837-1 ; brass cases and dials ; siphon pipework and connections ; isolating valves/cocks Pressure gauges C to suit * diameter pipes Subsidiary stop valves ; electric monitoring type ; capable to generate visual and audible signal Subsidiary stop valves D to suit * diameter pipes Tamper-proof electric switches ; associated wiring and installation, complying LPC Rules and General Specification Tamper proof electric switches ; control and alarm indication E to suit sprinkler system (FS) nr (FS) nr (FS) nr (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/9

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Sprinkler control valve sets ; comprising pressure gauges, valves, alarm and monitoring devices, water motor gongs, testing facilities and retarding chambers ; all necessary accessories ; complying LPC Rules Sprinkler control valve sets ; duplicate alarm valve arrangement A to suit * diameter pipes (FS) nr

Water flow alarm switches ; high sensitivity ; actuated by operation of one sprinkler head Water flow alarm switches ; LPCB approved type ; automatic flow switch testing system and controlling test panels B to suit * diameter pipes (FS) nr

Butterfly valves (anti-pollution valves) without stop screw and lock nut on handle ; complying FSD Requirements and Circular Letters Butterfly valves C * diameter (FS) nr

Pump sets ; cast iron casings ; driving motor ; water seal connection, vents, drains, priming plugs, associated pipework and anti-vibration mountings ; adjacent emergency stops ; all necessary components and accessories ; complete as in the Particular Specification Horizontal spindle type centrifugal pumps ; controlled by independent LPCB approved pressure switches D duty pump sets ; capable of delivering * l/s at * kPa static pressure (ref. *) standby pump sets ; capable of delivering * l/s at * kPa static pressure (ref. *)

(FS)

nr

E

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/10

To C olle ction

$

FIRE SERVICE INSTALLATION AUTOMATIC SPRINKLER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A jockey pump sets ; complying Building Energy Code ; capable of delivering * l/s at * kPa static pressure (ref. *) (FS) DESIGN, SUPPLY AND INSTALL GASEOUS EXTINGUISHING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Galvanised mild steel pipes and fittings ; heavy grade ; BS EN 10255 ; screwed and socket joints Pipework and fittings ; suspended from soffits B * diameter (FS) m

nr

Pipework and fittings ; fixed to walls and columns C * diameter Extra over pipework for D E F * bends * tees * reducing tees (FS) (FS) (FS) nr nr nr (FS) m

Electric resistance and induction welded carbon steel pipes and fittings ; BS EN 10217-1 Schedule 80 Grade 410/ASTM AT106/A106M Grade A ; hot finished or cold Schedule 80 ; screwed joints Pipework and fittings ; suspended from soffits G * diameter (FS) m

Pipework and fittings ; fixed to walls and columns H * diameter Extra over pipework for J K * bends * tees (FS) (FS) nr nr (FS) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/11

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL GASEOUS EXTINGUISHING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A * reducing tees (FS) nr

Discharge nozzles ; robust construction ; discharge orifices ; corrosion resistant metal ; necessary accessories Discharge nozzles B working pressure * ; temperature * (FS) Gas cylinders ; rechargeable and re-usable type ; gas valves ; check valves ; actuators ; pressure gauges ; flexible hose ; liquid measuring device ; all release devices and mechanism ; all necessary accessories ; mounting and supports Carbon dioxide cylinders ; seamless steel construction ; BS EN 1964-1 C set of * cylinders ; each capacity * kg (FS) System odoriser ; automatically treating gas released from cylinder ; all necessary accessories Odorisers D citrus odour Automatic/manual lock of unit ; key switches Automatic/manual lock off units E for fire detection and system control Emergency release handle ; direct mechanism ; removable pin Emergency release handle F installed near gas cylinders (FS) nr (FS) nr nr

nr

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/12

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL GASEOUS EXTINGUISHING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Manual release units ; pull handles in glass box ; "break glass" box cover Manual release units A installed at * (FS) nr

Warning lights and notices ; indicator lights ; 1.6 thick metal plate explanatory/warning notices ; connection to power Green indicator lights and warning notices B fixed on entrance doors (FS) nr

Amber indicator lights and warning notices C fixed on entrance doors (FS) nr

Red indicator lights and warning notices D fixed on entrance doors Smoke detectors Smoke detectors ; analogue addressable ; point-type ; BS EN 54-7 E semi-recessed mounting Heat detectors Heat detectors ; analogue addressable ; point-type ; Class A2 ; BS EN 54-5 ; flush mounting F combined fixed temperature and rate-of-temperature-rise (FS) nr (FS) nr

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/13

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL GASEOUS EXTINGUISHING SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Gaseous extinguishing system control panels Gaseous extinguishing system control panel ; adjustable time delay unit ; sealed, nickel-metal hydride type battery ; battery charger ; ammeter ; voltmeter ; relays ; contacts ; switches ; necessary accessories ; indication devices ; connection to electrical power source A gaseous extinguishing control panel (ref. *)

(FS)

nr

Control and monitoring circuits ; fire resistant cables ; including trunkings, conduits and fittings From gaseous extinguishing system control panel B to automatic / manual lock off units to emergency release handle to manual release units to warning lights

(FS) (FS) (FS) (FS)

nr nr nr nr

C D E

DESIGN, SUPPLY AND INSTALL AUDIO/VISUAL ADVISORY SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Central equipment for audio system ; fire resisting cables and conduits ; BS 6387 Cat AWX / SWX / BS 6207 / BS EN 60702 ; ancillary components and accessories ; connections to other equipment and spur units (spur units measured separately) Equipment ; mounted in stainless steel enclosure and equipment rack (enclosure and equipment rack measured separately) F G H pre-amplifiers amplifiers cassette deck ; two individual cassette players (FS) (FS) nr nr

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/14

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL AUDIO/VISUAL ADVISORY SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A B CD decks desktop microphones ; single zone type ; condenser microphone on gooseneck ; cable minimum 1000 long ; plug (FS) nr

(FS)

nr

C

cassette tapes of 60 minutes ; high quality type ; fully recorded on both sides with specified audio alarm messages and audio alarm bell signal (FS) Enclosure and equipment rack ; 1.6 thick minimum BS EN 10088-1 No. 1.4401 stainless steel sheet construction Enclosure and equipment racks ; wall mounted

nr

D

for audio system

(FS)

nr

Loudspeakers ; crisp, clear audio reproduction, alarm tone signalling ; high impact ABS plastic construction ; tapped transformers ; integrated attenuators ; back enclosure Loudspeakers ; flush mounted on false ceiling E maximum output rating 1 Watt, frequency response within +3 and -7dB from 100 to 10,000 Hz

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/15

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL AUDIO/VISUAL ADVISORY SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Microphone control panels ; 1.6 thick BS EN 10088-1 No. 1.4401 stainless steel housing ; well-ventilated and free from vermin and corrosion proof ; speaker zone switchbank and annunciator module ; tape transfer, power supervisor and remote transmission module ; automatic timer sequencer ; alarm failure transfer units ; general alarm and all call module ; alarm input transfer module ; battery and charger ; accessories ; connection to power ; wirings and conduits Control panels ; located in * room ; wall mounted type A control panels (ref. *) (FS) nr

Visual system ; coloured and flashing lights ; illuminated exit/directional signs ; BS 5499-1, BS 5499-4, BS EN 60598-1, BS EN 60598-2-22+A2, BS 5266-1, BS EN 50172, BS EN 1838 ; FSDCoP, FSD Requirements and Circular Letters ; battery, battery chargers, wiring, testing facilities ; changeover switches ; connection to power and all accessories Illuminated exit/directional signs ; integrated flashing light control gear ; lamp-holder sets B size * (FS) nr

Low-level lights ; internally illuminated ; direction indicated ; flashing light control gear C size * (FS) nr

Low-level directional signs ; non-flashing photo-luminous type D size * (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/16

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL AUDIO/VISUAL ADVISORY SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Control and monitoring circuits ; fire resistant cables ; complying FSD requirements ; low smoke zero halogen type ; BS 6387 Category CWZ ; BS EN 50200 (Class PH30) ; BS EN 61034-1 / IEC 61034-1/2 ; BS EN 50267-2 / IEC 60754-1 / IEC 60754-2 ; acid gas emission 0.5% maximum ; gas pH level 4.3 minimum ; BS 7629-1 / BS 7846 ; complete with cable trays, cable trunkings, conduits and fittings From control panel (ref. *) A B C to pre-amplifiers to amplifiers to cassette deck ; two individual cassette players to CD decks to microphones to exit/directional signs (FS) (FS) nr nr

(FS) (FS) (FS) (FS)

nr nr nr nr

D E F

Amplifier output circuits ; fire resistant cables ; complying FSD requirements ; low smoke zero halogen type ; BS 6387 Category CWZ ; BS EN 50200 (Class PH30) ; BS EN 61034-1 / IEC 61034-1/2 ; BS EN 50267-2 / IEC 60754-1 / IEC 60754-2 ; acid gas emission 0.5% maximum ; gas pH level 4.3 minimum ; BS 7629-1 / BS 7846 ; complete with cable trays, cable trunkings, conduits and fittings From amplifiers ; low power loss and interference protected twin cables G to loudspeakers (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/17

To C olle ction

$

FIRE SERVICE INSTALLATION

MANUAL AND AUTOMATIC FIRE ALARM SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Manual call points ; non-combustible and corrosion resistant construction ; non-deteriorating alloy contacts ; concealed "test" device Break-glass type ; BS EN 54-11 ; addressable / integrated with interfacing module ; fixed at 0.90-1.20m above finished floor level ; FSD approved A flush semi-recessed mounting (FS) nr

Heat detectors ; point-type ; Class A2, BS EN 54-5 ; analogue addressable ; continuous non-condensing under relative humidity up to 99% and 95% non-air-conditioned space and air-conditioned space ; LED indicators enable 360 degrees viewing ; all necessary accessories Minimum IP 43 protection ; flush mounting B combined fixed temperature and rate-of-temperature-rise

(FS)

nr

Ionisation smoke detectors ; point-type ; BS EN 54-7 ; analogue addressable ; continuous non-condensing under relative humidity up to 99% and 95% in non-airconditioned space and air-conditioned space ; radioactive isotopes with radiation level of less than 0.1 mr/h at 100m ; minimum two ionization chambers ; built-in signal integration feature ; LED indicators enable 360 degrees viewing ; all necessary accessories ; submissions Ionization smoke detectors ; working life 10 years (minimum) C pendant mounting (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/18

To C olle ction

$

FIRE SERVICE INSTALLATION MANUAL AND AUTOMATIC FIRE ALARM SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Optical smoke detectors ; point-type ; BS EN 54-7 ; analogue addressable ; continuous non-condensing under relative humidity up to 99% and 95% in non-airconditioned space and air-conditioned space ; detection chamber housing ; infra-red light emitter and silicon DIN photo diode sensor ; LED indicators enable 360 degrees viewing ; all necessary accessories Optical smoke detectors ; working life 10 years (minimum) A pendant mounting (FS) nr

Remote alarm indicator lamps ; LED indicators enable 360 degrees viewing ; visible at 6m (minimum) in an ambient light of 500 lux (maximum) ; necessary wirings and conduits Remote alarm indicator lamps ; for detectors B C ceiling mounting door mounting (FS) (FS) nr nr

Visual alarm units ; * alarm signalling strobe light and associated lens/reflectors system ; back up emergency power supply, battery supply ; all necessary accessories Visual alarm units ; flashing light ; NFPA 72 D semi-flush mounting (FS) nr

Alarm bells ; BS EN 54-3 ; capable of producing sound level of 80 dB(A) (minimum) at 3m ; high performance and reliability micro motor ; back up emergency power supply, battery supply Alarm bells ; suitable for use in addressable system E minimum 150 diameter gongs (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/19

To C olle ction

$

FIRE SERVICE INSTALLATION MANUAL AND AUTOMATIC FIRE ALARM SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Addressable interface modules ; mounted into junction box ; LED lights Monitor modules ; supervised initiating circuit ; fault indicating facilities and testing facilities A monitor modules (FS) nr

Control modules ; supervising and monitoring wiring to alarm bell, flashing light units, indicator units and interface relay B control modules (FS) nr

Fault isolator modules ; complete with at least 20 intelligent addressable devices C fault isolator modules (FS) nr

Testers ; high level located ; stainless steel label plates Testers ; easily accessible ; flush mounted type D E F for break glass units for heat detectors for smoke detectors (FS) (FS) (FS) nr nr nr

PORTABLE HAND-OPERATED APPLIANCES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Fire blankets and sand buckets Fire blankets ; BS 7944 ; heavy duty renewable type ; wall mounted G FSD approved heavy duty type Sand buckets ; galvanised steel and painted red ; mounting brackets ; wall mounted H 10 litres capacity (minimum) (FS) nr (FS) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/20

To C olle ction

$

FIRE SERVICE INSTALLATION PORTABLE HAND-OPERATED APPLIANCES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Fire extinguishers ; rechargeable hand-operated type ; manufactured and tested to recognized international standards ; batch-approved certificate/mark Carbon dioxide type ; wall mounted A * capacity Carbon dioxide type ; housed in cabinet B * capacity NASF III type ; wall mounted C * capacity (FS) nr (FS) nr (FS) nr

ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Starters Star-delta starters D * A to suit fire service pumps (ref. *) * A to suit sprinkler pumps (ref. *)

(FS)

nr

E

(FS)

nr

Fire resistant cables ; complying FSD requirements ; low smoke zero halogen type ; BS 6387 Category CWZ ; BS EN 50200 (Class PH30) ; BS EN 61034-1 / IEC 61034-1/2, BS EN 50267-2 / IEC 60754-1 / IEC 60754-2 ; acid gas emission 0.5% maximum ; gas pH level 4.3 minimum ; BS 7629-1 / BS 7846 ; complete with cable trays, cable trunkings, conduits and fittings From electricity supply points/isolators F * mm2, * core cables ; to fire service pump starter panels (ref. *) (FS) * mm2, * core cables ; to sprinkler pump starter panels (ref. *)

nr

G

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/21

To C olle ction

$

FIRE SERVICE INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) From starter panels (ref. *) A * mm2, * core cables ; to fire service pumps (ref. *) * mm2, * core cables ; to sprinkler pumps (ref. *)

(FS)

nr

B

(FS)

nr

DESIGN, SUPPLY AND INSTALL CONTROL SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control and indicating panels Fire alarm control and indicating panels ; BS EN 54-2 ; 1.6 thick minimum BS EN 10088-1 No. 1.4401 stainless steel sheet construction ; BS EN 60529 IP 52 protection ; FSD approved ; glazed lockable door ; detection and alarm devices ; surge arresters ; battery and charger sets ; interconnecting wiring and conduits ; all provisions, components and accessories ; signal transmission to FSD C automatic sprinkler system alarm control and indicating panels

(FS)

nr

D

addressable fire alarm control and indicating panels ; analogue addressable intelligent type ; minimum 10% spare capacity for future expansion (FS) Alarm repeater panels ; 1.6 thick minimum BS EN 10088-1 No. 1.4401 stainless steel sheet construction ; glazed lockable door ; detection and alarm devices ; surge arresters ; interconnecting wiring and conduits ; battery and charger sets ; all provisions, components and accessories

nr

E

alarm repeater panels ; with engraved laminated plastic mimic diagram (ref. *)

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/22

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL CONTROL SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Starter panels ; 1.6 thick minimum mild steel sheet construction ; BS EN 60529 IP 65 protection ; lockable door ; detection and alarm devices ; surge arresters ; battery and charger sets ; interconnecting wiring and conduits ; necessary components and accessories A B for fire service pumps (ref. *) for sprinkler pumps (ref. *) (FS) (FS) nr nr

Alarm, detection and control circuits ; fire resistant cables ; complying FSD requirements ; low smoke zero halogen type ; BS 6387 Category CWZ ; BS EN 50200 (Class PH30) ; BS EN 61304-1 / IEC 61034-1/2 ; BS EN 50267-2 / IEC 60754-1 / IEC 60754-2 ; acid gas emission 0.5% maximum ; gas pH level 4.3 minimum ; BS 7629-1 / BS 7846 ; complete with cable trays, cable trunkings, conduits and fittings From addressable fire alarm control and indicating panel C D E F to A/C system control panel (FS) nr nr nr

to lift installation control panel (FS) to security system control panel (FS)

to smoke extraction system control panel (FS) to automatic sprinkler system alarm control and indicating panel (FS) to gaseous extinguishing system control panel to microphone control panel to alarm repeater panel to smoke detectors ; via addressable interface modules to heat detectors ; via addressable interface modules

nr

G

nr

H

(FS) (FS) (FS)

nr nr nr

J K L

(FS)

nr

M

(FS)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/23

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL CONTROL SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A to visual alarm units and signals ; via addressable interface modules to alarm bells ; via addressable interface modules to manual call points ; via addressable interface modules

(FS)

nr

B

(FS)

nr

C

(FS)

nr

D

to water flow alarm switches ; via addressable interface modules (FS) to electric alarm pressure switches ; via addressable interface modules to subsidiary stop valves ; via addressable interface modules From automatic sprinkler system alarm control and indicating panel

nr

E

(FS)

nr

F

(FS)

nr

G

to sprinkler control valve sets From alarm repeated panels (ref. *)

(FS)

nr

H

to mimic diagram From starter panels (ref. *)

(FS)

nr

J K

to fire service pumps (ref. *) to sprinkler pumps (ref. *) Fire service computer system

(FS) (FS)

nr nr

Fire service computer system ; high-resolution monitor, keyboard, printer, signal cabling facilities and central processing unit ; sufficient capacity and memories ; power supply and battery chargers set ; network link ; all software, hardware, control devices ; all ancillary components and accessories L fire service computer system ; located at *

( ACCD)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/24

To C olle ction

$

FIRE SERVICE INSTALLATION DESIGN, SUPPLY AND INSTALL CONTROL SYSTEM ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Web cameras ; good quality high-resolution colour images ; all ancillaries components ; connections to fire service computer system Web cameras ; remote monitoring of room environment and fire service equipment ; initial fire alarm checking A B located at fire service pump room located at fire control room/centre (FS) nr

(FS)

nr

EMERGENCY LIGHTING ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Battery emergency lighting system ; emergency luminaries ; BS EN 60598-2-22+A2 ; flame and ignition resistant ; operate at 70 degrees Celsius ; connections to power supply ; fire resistant cables and conduits ; ancillary components and accessories ; back up by emergency generator Design, supply and install central supplied emergency luminaries ; central battery power supply ; ISO 9001 C * no. x * W emergency lighting luminaries

(FS)

nr

Testing facilities ; simulating normal supply failure ; ancillary components and accessories Testing facilities for D centrally supplied emergency luminaries

(FS)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/25

To C olle ction

$

FIRE SERVICE INSTALLATION

EXIT SIGN ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Exit signs ; BS 5499-1, 5499-4, BS EN 60598-1, 60598-2-22+A2, BS 5266-1, BS EN 50172, BS EN 1838 ; related directional signs ; maintained operation luminaries ; connections to power supply ; fire resistant wirings and conduits ; ancillary components and accessories Central supplied exit signs ; connected to central battery set ; complying FSDCoP and Fire Safety Code requirements A size * (FS) nr

FIRE SERVICES SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items are in respect of the whole Fire Service Installation Allow for B marking the positions of holes, mortices, chases and the like in the structure

(FS)

-

item

-

C

inspection, testing and commissioning of the complete Fire Service Installation ; all as described in Part D of the General Specification for Fire Service Installation (FS) inspection, attendance, operation and maintenance during Maintenance Period ; all as described in the Particular Specification and Part E of the General Specification for Fire Service Installation (FS) providing all necessary power and water, diesel, gas and fuels in connection with testing, commissioning and maintenance

-

item

-

D

-

item

-

E

(FS)

-

item

-

F

providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Fire Service Installation (FS)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/26

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE SERVICES SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Fire Service Installation (FS) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Fire Service Installation (FS) providing training of employer's staff as described in the Particular Specification and Section A3.6 of the General Specification for Fire Service Installation providing sample boards as described in Section A3.7 of the General Specification for Fire Service Installation supplying and fixing galvanised mild steel pipe sleeves through walls, floors and ceilings supplying and fixing fire rated pipe sleeves through fire rated walls, floors and building roofs

-

item

-

B

-

item

-

C

(FS)

-

item

-

D

(FS)

-

item

-

E

(FS)

-

item

-

F

(FS)

-

item

-

G

supplying and fixing fire stopping to walls and floors (FS) supplying and fixing necessary sleeves, caulking and flashing for work through waterproof layers or structures (FS) supplying and fixing by other trades necessary sleeves, caulking and flashing for work through waterproof layers or structures (FS)

-

item

-

H

-

item

-

J

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/27

To C olle ction

$

FIRE SERVICE INSTALLATION FIRE SERVICES SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing telephone linking with FSD's approved agency for Maintenance Period ; alarm transmitters ; power supply and conduit works ; including all initial, rental and maintenance charges providing mock-ups and prototypes supplying conduit sleeves for fixing by other trades through walls, floors and ceilings

(FS) (FS)

-

item item

-

B C

(FS)

-

item

-

D

supplying cable sleeves for fixing by other trades through walls, floors and ceilings (FS)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/28

To C olle ction

$

FIRE SERVICE INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.23/1 MODBQ.23/2 MODBQ.23/3 MODBQ.23/4 MODBQ.23/5 MODBQ.23/6 MODBQ.23/7 MODBQ.23/8 MODBQ.23/9 MODBQ.23/10 MODBQ.23/11 MODBQ.23/12 MODBQ.23/13 MODBQ.23/14 MODBQ.23/15 MODBQ.23/16 MODBQ.23/17 MODBQ.23/18 MODBQ.23/19 MODBQ.23/20 MODBQ.23/21 MODBQ.23/22 MODBQ.23/23 MODBQ.23/24 MODBQ.23/25 MODBQ.23/26 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... C.fwd $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/29

FIRE SERVICE INSTALLATION C O L L E C T I O N Page No. Page No. MODBQ.23/27 MODBQ.23/28 B.fwd ...................................... ...................................... $

Bill Nr. MODBQ.23 - FIRE SERVICE INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.23/30

Bill Nr. MODBQ.24 LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM Low Voltage Cubicle Switchboard (ref. *) ; complete with all interconnecting, control and ancillary wirings ; as detailed in Section C11 of Electrical General Specification comprising : Air circuit breakers (ACBs) ; type-tested to IEC 60947-2 ; horizontally withdrawable type ; triple-pole with switched neutral ; complete with built-in overload protection, closing and tripping facilities of IDMT characteristics (IDMT relays measured separately) ; interlocking provisions ; contacts ; safety shutters, racking gears with indicators and padlocks ; identification labels A * A ; breaking capacity * kA (SB) nr

Moulded case circuit breakers (MCCBs) ; type-tested to IEC 60947-2 ; IP30 minimum ; triple-pole ; complete with overcurrent and earth fault protection ; padlocking facilities and keys B * A ; breaking capacity * kA (SB) nr

Fuseswitches ; totally enclosed, quick-make and quick-break type ; complying Electricity (Wiring) Regulations ; SPN ; complete with air-break type contacts ; interlocking provisions ; padlocking facilities C * A ; utilization categories of * (SB) nr

Fuseswitches ; totally enclosed, quick-make and quick-break type ; complying Electricity (Wiring) Regulations ; TPN ; complete with air-break type contacts ; interlocking provisions ; padlocking facilities D * A ; utilization categories of * (SB) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/1

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM (Cont'd) Fuseswitches ; totally enclosed, quick-make and quick-break type ; complying Electricity (Wiring) Regulations ; four-pole ; complete with air-break type contacts ; interlocking provisions ; padlocking facilities A * A ; utilization categories of * Switchfuses ; complying Electricity (Wiring) Regulations ; SPN B * A ; utilization categories of * Switchfuses ; complying Electricity (Wiring) Regulations ; TPN C * A ; utilization categories of * Switchfuses ; complying Electricity (Wiring) Regulations ; four-pole D * A ; utilization categories of * (SB) nr (SB) nr (SB) nr (SB) nr

IDMT relays ; IEC 60255 ; electromechanical, draw-out-case type ; flush mounted E F overcurrent protection relays earth fault relays Meters G H J check meters power factor meters ammeters ; complete with selector switches voltmeters ; complete with selector switches Current transformers ; IEC 60044 ; for ammeters ; accuracy Class "3" L * A/ * A (SB) nr (SB) (SB) nr nr (SB) (SB) nr nr

(SB)

nr

K

(SB)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/2

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM (Cont'd) Current transformers ; IEC 60044 ; for digital multi-function power meters A * A/ * A Current transformers ; IEC 60044 ; for protection B * A/ * A Current transformers ; IEC 60044 ; for watt-hour meters ; accuracy Class "1" C * A/ * A HRC fuses ; carrier D * A Links ; neutral E approved type Lamps ; * V DC ; built-in transformers F indicating lamps (SB) nr (SB) nr (SB) nr (SB) nr (SB) nr (SB) nr

Copper busbars ; hard drawn high conductivity ; electro-tinned ; triple pole and full neutral ; enclosed inside low voltage cubicle switchboard G * A (SB) item -

Anti-condensation heaters and thermostats in low voltage cubicle switchboards H approved type (SB) item -

Copper earth bars of ample size ; fixings, connections ; all necessary earthing and bonding accessories J approved type (SB) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/3

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM (Cont'd) Switchboard ; multi-cubicle, indoor type ; IEC 60439-1 ; minimum 2 thick sheet steel construction ; IP31 to IEC 60529 ; complete with metering, housing and cabling compartments, C.T. chambers ; mounting brackets ; cabling facilities and supports, space provisions ; insulators ; information name plates ; warning labels ; schematic wiring and operation diagrams A overall size *m long x *m wide x *m high ; suitable for cable entry from bottom (SB) Ancillary equipment B hydraulic operated handling truck for handling air circuit breaker ; all necessary accessories (SB) operating handles ; jigs and the like for fixing and removing the detachable panels and normal charging, closing, opening, racking in and out operation of all circuit breakers ; complete with brass hooks and fixing boards (SB) portable earthing equipment set for each main incoming air circuit breaker (SB) rubber mats ; BS 921 / IEC 61111 ; 10 thick ; placed on floors in front of and at the rear of low voltage cubicle switchboards ; length to suit the low voltage cubicle switchboards (SB) complete set of fuses for each rating of fuses in all fuseswitches and switchfuses ; fixing wooden board

nr

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

(SB)

-

item

-

G

battery charger and batteries set ; solid state secondary d.c. power supply unit ; sealed type nickel-metal-hydride battery ; voltmeter ; ammeter ; battery test facilities ; internal wiring ; * V D.C. (SB)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/4

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM (Cont'd) The following facilities for items supplied and fixed by the supply company Supply Company's cables between current transformers and meters A providing approved cabling facilities for installing the cables Supply Company's metering equipment B providing mounting fuses to circuits insulating panels for the meters ; suitable protect the voltage coil ; fuses and fuseholders (SB)

(SB)

-

item

-

-

item

-

Power factor improvement system Power factor correction equipment ; capacitor bank ; switching facilities ; capacitor modules ; fuses, control relays, contactor switches, ammeters, etc. ; other necessary control accessories ; housing, fixings, earthing and bonding ; internal wiring ; cubicle mounted C * kVAR ; * stages control Fuseswitches ; complying Electricity (Wiring) Regulations ; SPN D * A Fuseswitches ; complying Electricity (Wiring) Regulations ; TPN E * A Fuseswitches ; complying Electricity (Wiring) Regulations ; DP F * A Switchfuses ; complying Electricity (Wiring) Regulations ; SPN G * A (SB) nr (SB) nr (SB) nr (SB) nr (SB) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/5

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION DESIGN, SUPPLY AND INSTALL LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION ; IN PLANT ROOM (Cont'd) Switchfuses ; complying Electricity (Wiring) Regulations ; TPN A * A Switchfuses ; complying Electricity (Wiring) Regulations ; DP B * A (SB) nr (SB) nr

Moulded case circuit breakers (MCCBs) ; * pole ; breaking capacity not less than * kA ; handle lock attachment ; complete with padlock and three keys C * A LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION SUNDRIES ; IN PLANT ROOM The following items are in respect of the whole Low Voltage Cubicle Switchboards Installation Allow for D marking the positions of holes, mortices, chases and the like in the structure (SB) nr

(SB)

-

item

-

E

inspection and testing the complete Low Voltage Cubicle Switchboards Installation and each distribution circuit before and after connection of power supply ; all as described in the Particular Specification and Section C11.16 of the General Specification for Electrical Installation (SB) inspection, operation and maintenance of the complete Low Voltage Cubicle Switchboards Installation during Maintenance Period ; all as described in the Particular Specification and Section E3 of the General Specification for Electrical Installation

-

item

-

F

(SB)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/6

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION SUNDRIES ; IN PLANT ROOM (Cont'd) A providing all necessary power and water, diesel and fuels in connection with inspection, testing and commissioning and maintenance

(SB)

-

item

-

B

providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Electrical Installation (SB) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Electrical Installation (SB) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Electrical Installation (SB) providing tuition of Employer's staff for a period of * weeks ; all as described in the Particular Specification and Section E1.1 of the General Specification for Electrical Installation (SB) sample boards ; all as described in the Particular Specification and Section A3.7 of the General Specification for Electrical Installation providing mock-ups and prototypes

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

(SB) (SB)

-

item item

-

G H

supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between conduits and sleeves (SB)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/7

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION SUNDRIES ; IN PLANT ROOM (Cont'd) A supplying cable sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between cables and sleeves (SB) supplying and fixing fire stopping to walls and floors (SB)

-

item

-

B

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/8

To C olle ction

$

LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.24/1 MODBQ.24/2 MODBQ.24/3 MODBQ.24/4 MODBQ.24/5 MODBQ.24/6 MODBQ.24/7 MODBQ.24/8 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.24 - LOW VOLTAGE CUBICLE SWITCHBOARDS INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.24/9

Bill Nr. MODBQ.25 DIESEL GENERATING SETS INSTALLATION DIESEL GENERATING SETS INSTALLATION ; IN PLANT ROOM Design, supply and install Diesel Generating Sets and associated equipment ; as detailed in the Particular Specification, Section C12 of the General Specification for Electrical Installation and drawing nr. * Diesel Generating Sets Installation ; minimum prime power rating * kVA comprising : A diesel generating engine ; alternator ; electrical battery starting system ; cooling system ; lubricating oil system ; exhaust system and ductwork and silencers ; necessary equipment and accessories (GESI) all pipework and accessories (GESI)

-

item item

-

B C

fuel supply system ; * litre daily service fuel tank and supporting frame ; fuel transfer pumping system ; oil drip trays ; oil resistant flexible hose ; fuel oil transfer pump ; diesel fuel level switches ; quick closing mechanism ; painting ; all necessary pipeworks, valves, fittings and accessories (GESI) topping up of all fuel tanks with fuel upon satisfactory completion of tests (GESI) lifting hoist ; trolley (GESI)

-

item

-

D

-

item item

-

E F

acoustic treatment installation to the whole diesel generating sets installation, generator room and fuel tank room (GESI)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.25/1

To C olle ction

$

DIESEL GENERATING SETS INSTALLATION DIESEL GENERATING SETS INSTALLATION ; IN PLANT ROOM (Cont'd) A electrical installation ; all cabling works including sensor cables ; earthing system

(GESI)

-

item

-

B

control cubicle ; panel ; switchgear ; wiring ; control equipment ; rubber mats and accessories ; clean contacts for alarms to be connected for remote indication (GESI) interfacing with central control and monitoring system (CCMS) ; complete with interfacing panels, contactors, relays, microswitches, transducers, transformers, signal and control cables, conduits and other necessary accessories ; connection to direct digital control system, CCMS or direct digital controllers (DDC) (GESI) DIESEL GENERATING SETS INSTALLATION SUNDRIES ; IN PLANT ROOM The following items are in respect of the whole Diesel Generating Sets Installation Allow for

-

item

-

C

-

item

-

D

marking the positions of holes, mortices, chases and the like in the structure (GESI) testing the complete Diesel Generating Sets Installation ; all as described in the Particular Specification and Section C12.13 of the General Specification for Electrical Installation (GESI) inspection, operation and maintenance of the complete Diesel Generating Sets Installation during Maintenance Period ; all as described in the Particular Specification and Section E3 of the General Specification for Electrical Installation (GESI)

-

item

-

E

-

item

-

F

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.25/2

To C olle ction

$

DIESEL GENERATING SETS INSTALLATION DIESEL GENERATING SETS INSTALLATION SUNDRIES ; IN PLANT ROOM (Cont'd) A providing all necessary power and water, diesel and fuels in connection with inspection, testing and commissioning, and maintenance (GESI) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Electrical Installation (GESI) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Electrical Installation (GESI) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Electrical Installation (GESI) providing tuition of Employer's staff for a period of * weeks ; all as described in the Particular Specification and Section E1.1 of the General Specification for Electrical Installation (GESI) sample boards ; all as described in the Particular Specification and Section A3.7 of the General Specification for Electrical Installation (GESI) schematic diagrams ; all as described in Section C12.12 of the General Specification for Electrical Installation (GESI) providing mock-ups and prototypes (GESI) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between couduits and sleeves (GESI)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item item

-

H J

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.25/3

To C olle ction

$

DIESEL GENERATING SETS INSTALLATION DIESEL GENERATING SETS INSTALLATION SUNDRIES ; IN PLANT ROOM (Cont'd) A supplying cable sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between cables and sleeves (GESI) supplying and fixing fire stopping to walls and floors (GESI)

-

item

-

B

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.25/4

To C olle ction

$

DIESEL GENERATING SETS INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. MODBQ.25/1 MODBQ.25/2 MODBQ.25/3 MODBQ.25/4 ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.25 - DIESEL GENERATING SETS INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.25/5

Bill Nr. MODBQ.26 UNINTERRUPTIBLE POWER SUPPLY SYSTEM GUIDANCE NOTE : A The PQS should check with the PBSE and include this section only if a separate approved specialist contractor for Uninterruptible Power Supply (UPS) System is required to carry out the works of this system. However, in many cases, the scope of the UPS System is comparatively small and belongs to other building services systems, which should be measured under the respective sections (UPSI) UNINTERRUPTIBLE POWER SUPPLY SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Design, supply and install Uninterruptible Power Supply (UPS) System and associated equipment and accessories ; as described in the Particular Specification and drawing nr. * UPS system ; minimum prime power rating * kVA comprising : B UPS module ; inverter, rectifier, batteries, battery chargers, by-pass transfer switches, etc. ; all associated interconnecting wiring and control equipment (UPSI) mimic diagram boards (UPSI)

-

item

-

-

item nr

-

C D

visual alarms ; fixing to control panels in * location (UPSI) control circuits ; approved cables ; conduits and fitting ; from UPS equipment to visual alarm points (UPSI)

nr

E

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.26/1

To C olle ction

$

UNINTERRUPTIBLE POWER SUPPLY SYSTEM

UNINTERRUPTIBLE POWER SUPPLY SYSTEM SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items are in respect of the supply and installation of the whole Uninterruptible Power Supply System Allow for A marking the positions of holes, mortices, chases and the like in the structure (UPSI) testing the complete Uninterruptible Power Supply System ; all as described in the Particular Specification (UPSI) inspection, operation and maintenance of the complete Uninterruptible Power Supply System during Maintenance Period ; all as described in the Particular Specification (UPSI) providing all necessary power and water, diesel and fuels in connection with inspection, testing and commissioning, and maintenance (UPSI) providing installation drawings ; all as described in the Particular Specification (UPSI) providing as-built drawings ; all as described in the Particular Specification (UPSI) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification (UPSI) providing tuition of Employer's staff for a period of * weeks ; all as described in the Particular Specification (UPSI) providing mock-ups and prototypes ; all as described in the Particular Specification (UPSI)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

H

-

item

-

J

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.26/2

To C olle ction

$

UNINTERRUPTIBLE POWER SUPPLY SYSTEM UNINTERRUPTIBLE POWER SUPPLY SYSTEM SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between couduits and sleeves (UPSI) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ; including approved packing materials in annular space between cables and sleeves (UPSI) supplying and fixing fire stopping to walls and floors (UPSI)

-

item

-

B

-

item

-

C

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.26/3

To C olle ction

$

UNINTERRUPTIBLE POWER SUPPLY SYSTEM C O L L E C T I O N Page No. Page No. Page No. MODBQ.26/1 MODBQ.26/2 MODBQ.26/3 ...................................... ...................................... ......................................

Bill Nr. MODBQ.26 - UNINTERRUPTIBLE POWER SUPPLY SYSTEM To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.26/4

Bill Nr. MODBQ.27 BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL TERRESTRIAL MASTER ANTENNA TELEVISION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Central equipment ; aerials ; 75 ohms unbalanced impedance, able to operate under loading pressure with sustained wind speed 170 km/hr and gusts 240 km/hr, stainless steel masts, earthed and lightning protected, durable protective coating ; stainless steel aerial mask ; as described in the Particular Specification and drawing nr. * Terrestrial aerials ; suitable for analogue and digital terrestrial television A TV aerials, gain at least 13 dB front to back ratio of at least 28 dB (CBSI) FM aerials, gain at least 6 dB (CBSI)

nr nr

B

Central equipment ; preamplifiers ; 75 ohms impedance (input and output), suitable for analogue and digital terrestrial television ; connection to power source ; interconnecting wirings and signal cables ; interfaces and accessories ; weatherproof housing ; as described in the Particular Specification and drawing nr. * Preamplifiers ; to suit PAL I System ; frequency FM 88 to 108 MHz and TV 54 to 862 MHz C preamplifiers TV bandpass preamplifiers ; frequency range within CH 21 to CH 60 D TV bandpass preamplifiers (CBSI) nr (CBSI) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/1

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL TERRESTRIAL MASTER ANTENNA TELEVISION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) FM bandpass preamplifiers ; frequency range 88 to 108 MHz A FM bandpass preamplifiers (CBSI) nr

Central equipment ; filters ; 75 ohms impedance (input and output), suitable for analogue and digital terrestrial television ; connection to power source ; interconnecting wirings and signal cables ; interfaces and accessories ; as described in the Particular Specification and drawing nr. * TV bandpass filters ; frequency range within CH 21 to CH 60 B TV bandpass filters (CBSI) nr

FM bandpass filters ; frequency range 88 to 108 MHz C FM bandpass filters (CBSI) nr

Central equipment ; amplifiers ; 75 ohms nominal impedance (input and output), suitable for analogue and digital terrestrial television, properly earthed ; connection to power source ; interconnecting wirings and signal cables ; interfaces and accessories ; as described in the Particular Specification and drawing nr. * Wideband amplifiers ; to suit PAL I System ; internally or externally fully screened metal box, mounting legs D wideband amplifiers (CBSI) nr

FM channel amplifiers with processor ; frequency range 88 to 108 MHz ; modular type construction plug-in units, metal-screened internally E FM channel amplifiers with processor

(CBSI)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/2

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL TERRESTRIAL MASTER ANTENNA TELEVISION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) TV channel amplifiers with processor and automated gain control (AGC) modules ; to suit PAL I System ; AGC modules ; modular type construction plug-in units, metal-screened internally A TV channel amplifiers with processor and AGC modules

(CBSI)

nr

Central equipment ; frequency converters ; 75 ohms impedence (input and output) ; as described in the Particular Specification and drawing nr. * Frequency converters ; frequency range 87 to 108MHz B frequency converters (CBSI) nr

Central equipment ; UHF modulators, modulating video signals to UHF range channels ; as described in the Particular Specification and drawing nr. * Output frequency range 54 to 862 MHz fixed channel C UHF modulators (CBSI) nr

Peripheral equipment ; splitters ; cascaded mode of operation ; return path Frequency range 5 to 862 MHz ; 13 dB minimum mutual attenuation between outputs D splitters (CBSI) nr

Peripheral equipment ; tee units ; cascaded mode of operation ; return path Frequency range 5 to 862 MHz ; 28 dB minimum mutual attenuation between outputs E tee units (CBSI) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/3

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL TERRESTRIAL MASTER ANTENNA TELEVISION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Peripheral equipment ; fiber optical transmitters ; modular design Frequency range 54 to 862 MHz A fiber optical transmitters Peripheral equipment ; fiber optical return path transmitters Return path frequency range 5 to 42 MHz B fiber optical return path transmitters Peripheral equipment ; fiber optical transceivers with return path Frequency range 54 to 862 MHz ; return path range 5 to 42 MHz C fiber optical transceivers with return path Peripheral equipment ; fiber optical splitters ; modular design Optical wavelength 1310 nm +/- 10 nm D fiber optical splitters (CBSI) nr (CBSI) nr

(CBSI)

nr

(CBSI)

nr

Signal/control circuits ; cables, conduits, trunkings and accessories ; clear identification and labels From central equipment E to all peripheral equipment Linking F between peripheral equipment (CBSI) item (CBSI) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/4

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL TERRESTRIAL MASTER ANTENNA TELEVISION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Final circuit ; coaxial cables ; low emission of smoke and corrosive gases to IEC 60332-1-1, IEC 61034-2 and IEC 60754-1 ; laying in separate trunkings (measured separately) and drawing into and including steel conduits and fittings and/or flexible steel conduits ; all cabling facilities ; earth continuity conductors ; clear identification and labels 75 ohms type copper cable ; permanent turning radius 10 times (min) of cable diameter from splitters A B to data triplex outlets to FM/TV triplex outlets (CBSI) (CBSI) nr nr

Field equipment ; outlet, triplex socket type, frequency dividing network and sockets, identified labels FM/TV/data triplex outlet ; frequency range 54 to 862 MHz and return path frequency 5 to 42 MHz C FM/TV/data triplex outlets (CBSI) nr

DESIGN, SUPPLY AND INSTALL SATELLITE MASTER ANTENNA TELEVISION (SMATV) SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Central equipment ; antennas ; installation to OFTA requirements, able to operate under loading pressure with sustained wind speed 170 km/hr and gusts 240 km/hr, steel frameworks and mounting, earthed and lightning protected, durable protective coating ; interconnecting wirings and signal cables ; interfaces and accessories Dish antennas ; solid aluminium plate D not less than 3m diameter (CBSI) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/5

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL SATELLITE MASTER ANTENNA TELEVISION (SMATV) SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Central equipment ; feedhorns ; suitable for circular and linear C-band and Ku-band reception, prime-focus reflectors, polarizers ; accessories recommended by manufacturers Positioned in focus point of antenna A feedhorns (CBSI) nr

Central equipment ; low noise amplifier (LNA)/low noise block down converter (LNB) ; installation to manufacturer's recommendation Input frequency C-band, 3.7 to 4.2 GHz ; Ku-band, 10.75 to 12.75 GHz B C low noise amplifiers low noise block down converters (CBSI) (CBSI) nr nr

Central equipment ; satellite receivers and modulators ; designed RF signals, video parameters and audio parameters ; properly earthed Multi-system compatible D satellite receivers (CBSI) nr

Central equipment ; satellite amplifiers Input frequency 950 to 2050 MHz E satellite amplifiers Peripheral equipment ; splitters ; cascaded mode of operation Frequency range 950 to 2050 MHz ; 13 dB minimum mutual attenuation between outputs F splitters (CBSI) nr (CBSI) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/6

To C olle ction

$

BROADCAST RECEPTION INSTALLATION DESIGN, SUPPLY AND INSTALL SATELLITE MASTER ANTENNA TELEVISION (SMATV) SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Peripheral equipment ; tee units ; cascaded mode of operation Frequency range 950 to 2050 MHz ; 28 dB minimum mutual attenuation between outputs A tee units (CBSI) nr

Signal/control circuits ; cables, conduits, trunkings and accessories ; clear identification and labels From central equipment B to all peripheral equipment Linking C between peripheral equipment (CBSI) item (CBSI) item -

Final circuit ; coaxial cables ; low emission of smoke and corrosive gases to IEC 60332-1-1, IEC 61034-2 and IEC 60754-1 ; laying in separate trunkings (measured separately) and drawing into and including steel conduits and fittings and/or flexible steel conduits ; all cabling facilities ; earth continuity conductors ; clear identification and labels 75 ohms type copper cable ; permanent turning radius 10 times of cable diameter from splitters D E to data triplex outlets to FM/TV triplex outlets (CBSI) (CBSI) nr nr

Field equipment ; outlet, triplex socket type, frequency dividing network and sockets, identified labels FM/TV/data triplex outlet ; frequency range 54 to 862 MHz and return path frequency 5 to 42 MHz F FM/TV/data triplex outlets (CBSI) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/7

To C olle ction

$

BROADCAST RECEPTION INSTALLATION

BROADCAST RECEPTION INSTALLATION SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items are in respect of the whole Broadcast Reception Installation Allow for A marking the positions of holes, mortices, chases and the like in the structure (CBSI) inspection, testing and commissioning of the complete Broadcast Reception Installation ; all as described in the Particular Specification and Part D of the General Specification for Broadcast Reception Installation (CBSI) providing training, attendance, inspection, operation and maintenance during Maintenance Period ; all as described in the Particular Specification and Part E of the General Specification for Broadcast Reception Installation (CBSI) providing all necessary power and water, diesel and fuels in connection with testing, commissioning and maintenance (CBSI) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Broadcast Reception Installation (CBSI) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Broadcast Reception Installation (CBSI) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Broadcast Reception Installation (CBSI)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/8

To C olle ction

$

BROADCAST RECEPTION INSTALLATION BROADCAST RECEPTION INSTALLATION SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing sample boards as described in Section A3.7 of the General Specification for Broadcast Reception Installation (CBSI) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ; complete with approved packing materials in annular space between conduits and sleeves (CBSI) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ; complete with approved packing materials in annular space between cables and sleeves (CBSI) supplying and fixing fire stopping to walls and floors (CBSI)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/9

To C olle ction

$

BROADCAST RECEPTION INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.27/1 MODBQ.27/2 MODBQ.27/3 MODBQ.27/4 MODBQ.27/5 MODBQ.27/6 MODBQ.27/7 MODBQ.27/8 MODBQ.27/9 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.27 - BROADCAST RECEPTION INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.27/10

Bill Nr. MODBQ.28 COMPRESSED AIR SYSTEM DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Steel pipes and fittings ; medium grade ; BS EN 10255 ; galvanised internally and externally ; screwed joints Pipework and fittings ; suspended from soffits A * diameter ( ACCD) m

Pipework and fittings ; fixed to walls and columns B * diameter Extra over pipework for C D E F G * bends * tees * reducing bends * reducing tees * caps Cast iron valves Gate valves H * diameter Check valves J * diameter Ball valves K * diameter Relief or safety valves ; enclosed adjustable spring loaded type L * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) nr ( ACCD) ( ACCD) ( ACCD) ( ACCD) ( ACCD) nr nr nr nr nr ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/1

To C olle ction

$

COMPRESSED AIR SYSTEM DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pressure reducing valves ; full way type A * diameter ( ACCD) nr

Stop and isolating valves ; screw down type B * diameter ( ACCD) nr

Air line lubricators ; aluminium die casting body ; transparent plastic type bowl and bowl guard Air line lubricators ; oil fog type with adjustable drip C to suit working pressure and air flow rate of system ( ACCD) Oil separators ; combined check and minimum pressure valves, all accessories Oil separators ; complete with easily removable filters D * diameter ( ACCD) nr

nr

Pressure gauges ; ISO 4126 and BS EN 837-1 Pressure gauges E to suit * diameter pipes Drain traps Drain traps ; float-operated and automatic F to suit * diameter pipes ( ACCD) nr ( ACCD) nr

Air compressors ; single stage ; air-cooled ; rotary screw type with oil injection ; suction silencer, framed system diagram, all piping, safety device, control and necessary accessories Air compressors ; fitted with intercoolers G discharge pressure * kPa ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/2

To C olle ction

$

COMPRESSED AIR SYSTEM DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Air line filters ; aluminium die casting body, bronze filters, auto drain Air line filters ; 5 micrometer grade A to suit working pressure of system ( ACCD) Air receivers ; steel welded fabrication ; BS 5169 Class III Grade E Air receivers ; welded bosses ; properly sized supply, delivery, drain, valves, manholes, plugs, identification plates, supports ; all necessary accessories ; vertically mounted B storage capacity of * l ( ACCD) nr

nr

DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM - ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY PVC cables ; run in concealed conduits with draw wires From isolators (isolators measured separately) C * x * mm2 ; to compressed air system control panel (ref. *)

( ACCD)

nr

DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control panel ; 2 thick galvanised steel sheet construction ; vermin proof ; IP 54 enclosures ; all as specified in the Particular Specification and drawing nr. * Compressed air system control panel ; wall-mounted type D located in plant room (ref. *) ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/3

To C olle ction

$

COMPRESSED AIR SYSTEM DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Control and monitoring circuits ; approved cables ; complete with cable trays, cable trunkings, conduits and fittings From compressed air system control panel (ref. *) A to air compressors (ref. *) ( ACCD) nr

DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole Compressed Air System Allow for B marking the positions of holes, mortices, chases and the like in the structure ( ACCD) inspection, testing and commissioning of the complete Compressed Air System ; all as described in the Particular Specification and Part D of the General Specification for Mechanical Installations ( ACCD) inspection, attendance, operation and maintenance during Maintenance Period ; all as described in the Particular Specification and Sections E2 to E4 of the General Specification for Mechanical Installations ( ACCD) providing all necessary power and water, diesel, gas and fuels in connection with testing, commissioning and maintenance ( ACCD) particular requirements on inspection and testing as described in Section C8.6 of the General Specification for Mechanical Installations ( ACCD)

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/4

To C olle ction

$

COMPRESSED AIR SYSTEM DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Mechanical Installations ( ACCD) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Mechanical Installations ( ACCD) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Mechanical Installations ( ACCD) training of users and operation and maintenance agents as described in the Particular Specification and Section E1 of the General Specification for Mechanical Installations ( ACCD) providing sample boards as described in Section A3.7 of the General Specification for Mechanical Installations ( ACCD) supplying pipe sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying and fixing fire stopping to walls and floors ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

H

-

item

-

J

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/5

To C olle ction

$

COMPRESSED AIR SYSTEM C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. MODBQ.28/1 MODBQ.28/2 MODBQ.28/3 MODBQ.28/4 MODBQ.28/5 ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.28 - COMPRESSED AIR SYSTEM To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.28/6

Bill Nr. MODBQ.29 STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Black mild steel pipes ; BS EN 10216-1 and BS EN 10217-1 ; cast steel (class 2000) fittings ; BS EN 10242 and BS 143 ; screwed joints Pipework and fittings ; suspended from soffits A * diameter (ACSC) m

Pipework and fittings ; fixed to walls and columns B * diameter Extra over pipework for C D E F G * bends * tees * reducing bends * reducing tees * caps Bronze valves Drain valves H * diameter Cast iron valves Gate valves J * diameter Check valves K * diameter (ACSC) nr (ACSC) nr (ACSC) nr (ACSC) (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr nr (ACSC) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/1

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Butterfly valves A * diameter (ACSC) nr

Pressure reducing valve ; spring-loaded relay operated type ; with steam separators B to suit * diameter pipes Safety and relief valves C * diameter Cast iron strainers Strainers ; Y type ; operating temperature 250 degrees Celsuius D * diameter (ACSC) nr (ACSC) nr (ACSC) nr

Gunmetal automatic air vents ; non-ferrous floats and guides ; non-corrodible valves and seats Automatic air vents ; complete with integral lock-shield valves ; and air release pipe E * diameter Steam traps Steam trap assemblies ; ball float type F * diameter (ACSC) nr (ACSC) nr

Temperature gauges ; insertion type ; stainless steel pockets ; scales Temperature gauges ; suitable for 1.5 times working pressure G to suit * diameter pipes (ACSC) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/2

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Sight glasses, double window type ; toughed glass, SG iron body Sight glasses A suitable for 200 degrees Celsius operating temperature (ACSC) Pressure gauges ; dials calibrated Pressure gauges ; BS EN 837 B to suit * diameter pipes (ACSC) nr

nr

Rigid glass or mineral fibre preformed section ; ISO 12241, BS 5970 and BS 5422, Class O ; sealed at all joints by vapour barrier and self adhesive foil tape * thick ; fixing externally to pipework and fittings C * diameter (ACSC) m

Extra over * thick fixing externally to pipework for D E F G H * bends * tees * reducing bends * reducing tees * caps (ACSC) (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr nr

Rigid glass or mineral fibre preformed section ; ISO 12241, BS 5970 and BS 5422, Class O * thick ; to valves J K L M * gate valves * check valves * butterfly valves * pressure reducing valve (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/3

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A B * safety and relief valves * drain valves * thick ; to strainers C * strainers * thick ; to air vents D * air vents * thick ; to steam trap assemblies E * steam trap assemblies (ACSC) nr (ACSC) nr (ACSC) nr (ACSC) (ACSC) nr nr

Protective coverings and finishings ; hammered aluminium sheeting 0.8 thick ; fixing to * thick insulation for F * diameter pipes (ACSC) m

Extra over 0.8 thick protective coverings and finishings to * thick insulation for G H J K L * bends * tees * reducing bends * reducing tees * caps (ACSC) (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr nr

Protective coverings and finishings ; hammered aluminium split boxes and lids ; easy removal 0.8 thick ; fixing to * thick insulation for M N P Q * gate valves * check valves * butterfly valves * pressure reducing valves (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/4

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A B C D E * safety and relief valves * drain valves * strainers * air vents * steam trap assemblies (ACSC) (ACSC) (ACSC) (ACSC) (ACSC) nr nr nr nr nr

Mild steel tanks ; all pipework, accessories and associated services in connection ; complete as in the Particular Specification and drawing nr. * Condensate/feed tank ; anti-corrosion painted internally and externally F * litres (ACSC) nr

Water break cistern ; galvanised steel ; BS 417 : Part 2 ; ion exchange resin filtering packaged equipment ; supports, accessories and connections ; complete as in the Particular Specification and drawing nr. * Water break cistern ; supports at high level G * litres (ACSC) nr

Chemical dosing and water sampling ; comprising chemical injection pump, mixing tank, timer controls, pipework and ancillaries ; water sampling closed cylinder and jacket, stainless steel coil, valved inlet and drain line ; complete as in the Particular Specification and drawing nr. * Chemical dosing and water sampling ; corrosion inhibitor and field-test kit H for steam boiler (ref. *) (ACSC) item -

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/5

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Steam boilers ; BS 2790 ; genuine 3-pass wet back, combustion chamber ; automatic burner ; factory assembled components and control panels (control panels measured separately) ; boiler accessories ; instrumentation ; insulations and controls ; designed footings ; associated services and connection ; complete as in Section * of the Steam Boiler Installation General Specification Steam boilers ; radiant heat type ; diesel oil fired A steam evaporating capacity * kg/hr at * degrees Celsius ; operating pressure * kPa (ref. *) (ACSC) DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY PVC cables ; run in concealed conduits with draw wires From isolators (isolators measured separately) B * x * mm2 ; to steam boiler control panel (ref. *)

nr

(ACSC)

nr

DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control panel ; 2 thick galvanised steel sheet construction ; vermin proof ; IP 54 enclosures ; ergonomically designed ; all as specified in the Particular Specification and drawing nr. * Steam boiler control panel ; wall-mounted type C located in plant room (ref. *) (ACSC) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/6

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Control and monitoring circuits ; approved cables ; complete with cable trays, cable trunkings, conduits and fittings From steam boiler control panel (ref. *) A B to steam boiler (ref. *) to ion exchange resin filtering packaged equipment (ref. *) (ACSC) nr

(ACSC)

nr

C

to chemical injection pump (ref. *) (ACSC) DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole Steam Boiler System Allow for

nr

D

marking the positions of holes, mortices, chases and the like in the structure (ACSC) inspection, testing and commissioning of the complete Steam Boiler System ; all as described in the Particular Specification and Part D of the General Specification for Mechanical Installations (ACSC) inspection, attendance, operation and maintenance during Maintenance Period ; all as described in the Particular Specification and Sections E2 to E4 of the General Specification for Mechanical Installations (ACSC) providing all necessary power and water, diesel, gas and fuels in connection with testing, commissioning and maintenance (ACSC)

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/7

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A particular requirements on inspection and testing as described in Section C1.6 of the General Specification for Mechanical Installations (ACSC) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Mechanical Installations (ACSC) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Mechanical Installations (ACSC) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Mechanical Installations (ACSC) training of users and operation and maintenance agents as described in the Particular Specification and Section E1 of the General Specification for Mechanical Installations (ACSC) providing sample boards as described in Section A3.7 of the General Specification for Mechanical Installations (ACSC) supplying pipe sleeves for fixing by other trades through walls, floors and ceilings (ACSC) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

-

item

-

H

(ACSC)

-

item

-

J

supplying cable sleeves for fixing by other trades through walls, floors and ceilings (ACSC)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/8

To C olle ction

$

STEAM BOILER SYSTEM DESIGN, SUPPLY AND INSTALL STEAM BOILER SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A supplying and fixing fire stopping to walls and floors (ACSC)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/9

To C olle ction

$

STEAM BOILER SYSTEM C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.29/1 MODBQ.29/2 MODBQ.29/3 MODBQ.29/4 MODBQ.29/5 MODBQ.29/6 MODBQ.29/7 MODBQ.29/8 MODBQ.29/9 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.29 - STEAM BOILER SYSTEM To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.29/10

Bill Nr. MODBQ.30 LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Seamless steel pipes Schedule 80 ; BS EN or ANSI/API Spec 5L pressure 2.75 MPa ; and fittings ; 10216-1, BS EN 10217-1 ; design working welded joints

Pipework and fittings ; suspended from soffits A * diameter ( ACCD) m

Pipework and fittings ; fixed to walls and columns B * diameter Extra over pipework for C D E * bends * tees * reducing tees ( ACCD) ( ACCD) ( ACCD) nr nr nr ( ACCD) m

Heavy grade steel pipes and fittings ; BS EN 10255 or ISO 65 ; medium pressure stage and below ; welded joints Pipework and fittings ; suspended from soffits F * diameter ( ACCD) m

Pipework and fittings ; fixed to walls and columns G * diameter Extra over pipework for H J K * bends * tees * reducing bends ( ACCD) ( ACCD) ( ACCD) nr nr nr ( ACCD) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/1

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) A B * reducing tees * caps ( ACCD) ( ACCD) nr nr

Malleable iron valves ; ASTM A 47 / A 47M-99 Non-return valves ; suitable for liquid or vapour use C * diameter Ball valves ; BS EN ISO 17292 D * diameter Quick-acting shut-off valves ; lever operation E * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr

Emergency shut-off valves ; thermal and manual means of closing F * diameter Excess flow valves G * diameter ( ACCD) nr ( ACCD) nr

Pressure relief valves ; spring-loaded, automatic operation self-detachable weatherproof cap and chain H * diameter ( ACCD) nr

Hydrostatic relief valves ; pressure setting 2.4MPa to 2.75MPa ; self-detachable weatherproof cap and chain J * diameter Drain valves K * diameter Ductile iron valves ; ASTM A395 Isolating valves ; globe type L * diameter ( ACCD) nr ( ACCD) nr ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/2

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Pressure regulators ; BS EN 12864, BS EN 13785 and BS EN 13786 Secondary pressure regulator A capable of maintaining outlet pressure of * kPa

( ACCD)

nr

Pressure governors ; BS EN 12864 + A3, BS EN 13785 + A1, BS EN 13786 + A1 Service governor B capable of maintaining outlet pressure of * kPa Pressure gauges ; stainless steel Pressure gauges ; mounting connection protected C to suit * diameter pipes ( ACCD) nr

( ACCD)

nr

Temperature gauges ; indirect type with pockets Temperature gauges D to suit * diameter pipes Content gauges To read % water capacity E to suit * diameter pipes To read % rated LPG capacity F to suit * diameter pipes ( ACCD) nr ( ACCD) nr ( ACCD) nr

Meters ; BS EN 12405-1 + A2, BS EN 1359, BS EN 12261, BS EN 12480 ; corrosion resistant body ; maintenance-free construction Meters ; housed in box for mechnical protection, sufficient ventilation G to suit LPG grade, pressure and flow ( ACCD)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/3

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Vaporisers ; flameproof design electric elements and components with enclosure to BS EN 60079-1 ; pressure relief valves ; liquid control device ; non-bimetal heat input control ; control valves ; water level indicator and low water level cut off ; gauges ; drain valves and shut-off valves ; all facilities and safety devices Vaporisers ; indirect heated type A vaporising capacity * litre/min ( ACCD) Gas appliances Domestic instantaneous type water heater ; room sealed balanced flue type ; built-in temperature regulator, flame failure detector, automatic gas shut-off valves, pilot burner, automatic piezo-electric ignition device and all necessary accessories B * kW ( ACCD) nr nr

Burners ; robust and durable metallic alloy ; combustion chamber, heat exchanger and all necessary components and accessories C * kW Gas cookers ; domestic type D * kW ( ACCD) nr ( ACCD) nr

Liquid-draw LPG cylinders ; supporting frames, all necessary accessories and safety devices Liquid-draw LPG cylinders E * kg ( ACCD) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/4

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Storage vessels ; horizontal ; steel construction ; Gas Authority approval ; post-weld heat treated ; adequate supports ; all necessary valves, level device, gauges ; earthing connection ; piping and accessories ; warning signs ; fitted with cathodic protection system Above ground ; fitted with inspection openings A * litre capacity ( ACCD) nr

LIQUEFIED PETROLEUM GAS INSTALLATION ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Power supply cables ; BS EN 60079-14 and BS EN 60079-10 ; run in conduits with draw wires From isolators (isolators measured separately) B * x * mm2 ; to vaporisers (ref. *) ( ACCD) * x * mm2 ; to gas leakage detection control panel (ref. *) ( ACCD) From fused spur units (fused spur units measured separately) D * x * mm2 ; to domestic instantaneous type water heaters (ref. *) ( ACCD) * x * mm2 ; to burners (ref. *) ( ACCD) * x * mm2 ; to gas cookers (ref. *) ( ACCD)

nr

C

nr

nr nr

E F

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/5

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION

LIQUEFIED PETROLEUM GAS INSTALLATION CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Design, supply and install control panels ; all as specified in the Particular Specification and drawing nr. * Gas leakage detection control panel (ref. *) ; wall-mounted type A located in plant room ( ACCD) nr

Alarm, detection and control circuits ; control cables ; BS EN 60079-14 and BS EN 60079-10-1 ; complete with cable trays, cable trunkings, conduits and fittings From gas leakage detection control panel (ref. *) B to gas detectors Gas detectors Inflammable type C gas detectors ( ACCD) nr ( ACCD) nr

LIQUEFIED PETROLEUM GAS INSTALLATION SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole Liquefied Petroleum Gas Installation Allow for D marking the positions of holes, mortices, chases and the like in the structure ( ACCD) inspection, testing and commissioning of the complete Liquefied Petroleum Gas Installation ; all as described in the Particular Specification and Part D of the General Specification for Liquefied Petroleum Gas Installation ( ACCD)

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/6

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A inspection, attendance, operation and maintenance for the complete Liquefied Petroleum Gas Installation during Maintenance Period ; all as described in the Particular Specification and Part E of the General Specification for Liquefied Petroleum Gas Installation ( ACCD) providing all necessary electricity, water, liquefied petroleum gas, town gas and fuel, calibrated equipment and instrument, apparatus, tools, consumables and non-consumable materials in connection with testing, commissioning and maintenance ( ACCD) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Liquefied Petroleum Gas Installation ( ACCD) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Liquefied Petroleum Gas Installation ( ACCD) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Liquefied Petroleum Gas Installation ( ACCD) training to Employer's staff as described in Section A5.2 of the General Specification for Liquefied Petroleum Gas Installation ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/7

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION LIQUEFIED PETROLEUM GAS INSTALLATION SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing sample boards as described in Section A3.7 of the General Specification for Liquefied Petroleum Gas Installation ( ACCD) supplying pipe sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying cable sleeves for fixing by other trades through walls, floors and ceilings ( ACCD) supplying and fixing fire stopping to walls and floors ( ACCD)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/8

To C olle ction

$

LIQUEFIED PETROLEUM GAS INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.30/1 MODBQ.30/2 MODBQ.30/3 MODBQ.30/4 MODBQ.30/5 MODBQ.30/6 MODBQ.30/7 MODBQ.30/8 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.30 - LIQUEFIED PETROLEUM GAS INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.30/9

Bill Nr. MODBQ.31 FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Carbon steel pipes and fittings ; heavy quality ; ISO 65 ; screwed joints Pipework and fittings ; laid in trenches ; complete with protections A * diameter (ACFO) m

Pipework and fittings ; suspended from soffits B * diameter (ACFO) m

Pipework and fittings ; fixed to walls and columns C * diameter Extra over pipework for D E F G H * bends * tees * reducing bends * reducing tees * caps Cast steel valves ; full way type Gate valves J * diameter Check valves K * diameter (ACFO) nr (ACFO) nr (ACFO) (ACFO) (ACFO) (ACFO) (ACFO) nr nr nr nr nr (ACFO) m

Remote control quick closing gate valves ; complete with emergency pull-off connects L * diameter (ACFO) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/1

To C olle ction

$

FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Bronze valves ; full way type Drain valves A * diameter Cast iron strainers Strainers ; double type B * diameter Pressure gauges Pressure gauges C to suit * diameter pipes Air/water meters Pedestal type ; comprising white dial gauge, pressure regulator, built-in filter, air hose, screw-down water dispenser, accessories and associated pipework D to suit * diameter pipes (ACFO) nr (ACFO) nr (ACFO) nr (ACFO) nr

Level switches ; IEC 60079-0 Group II A, Temperature Class T1 ; comprising a level sensor and a switch unit ; controller ; casing ; all necessary electrical components and control wirings ; BASEEFA certification Level switches ; capable to control on/off operation of remote system ; on-site calibration of level settings ; suitable for Zone 1 hazardous area E installed inside fuel tank (ACFO) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/2

To C olle ction

$

FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Daily service fuel tanks ; mild steel construction ; stiffeners and support frames ; socket connections ; fittings ; union couplings, valves, gauges and oil drip tray ; all accessories and associated services ; pipework connection and fittings ; as described in the Particular Specification and drawing nr. * Daily services fuel tanks ; for plants and appliances A * litre capacity (ACFO) nr

Underground horizontal fuel storage tanks ; EN 12285-1 ; hydraulically tested ; internally linseed oil thick coating and externally painted ; tank chambers, gauges ; dipsticks tank-hole covers ; all accessories, associated services and calibration ; as described in the Particular Specification and drawing nr. * Underground horizontal fuel storage tank ; for plants and appliances B * litre capacity (ACFO) nr

Fuel transfer pumps ; high quality cast iron construction ; high tensile steel shafts ; flame proof coupling motors ; valves ; strainers ; switches ; complete with composite pump control cubicles (composite pump control cubicles measured separately), alarm, wiring works ; all necessary accessories and overload protection ; as described in the Particular Specification and drawing nr. * Fuel transfer pumps ; rotary, positive displacement type ; for plants and appliances C duty pumps ; design capacity * (ref. *)

(ACFO)

nr

D

standby pumps ; design capacity * (ref. *) (ACFO)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/3

To C olle ction

$

FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Hand pumps ; 25 inlet ; outlet and flexible oil resistant pipes ; all necessary accessories ; as described in the Particular Specification and drawing nr. * Hand pumps ; semi-rotary double acting type ; for plants and appliances A flow rate of * l/s (ACFO) nr

DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM - ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY PVC cables ; run in concealed conduits with draw wires From isolators (isolators measured separately) B * x * mm2 ; to fuel transfer pump control cubicle (ref. *) (ACFO) DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control cubicles ; certificate issued by BASEEFA ; IPMCSP and IP 65 enclosure to IEC 60529 ; protection type EEx d flameproof ; as described in the Particular Specification and drawing nr. * Fuel transfer pump control cubicles ; suitable for operation in Zone 1 hazardous area ; wall-mounted type C located in plant room (ref. *) (ACFO) nr

nr

Control and monitoring circuits ; approved cables ; complete with cable trays, cable trunkings, conduits and fittings From fuel transfer pump control cubicle (ref. *) D to fuel transfer pumps (ref. *) (ACFO) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/4

To C olle ction

$

FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM - CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) Alarm, detection and control circuits ; approved cables ; complete with cable trays, cable trunkings, conduits and fittings From fuel transfer pump control cubicle (ref. *) A to level switches (ACFO) nr

DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole Fuel Supply System Allow for B marking the positions of holes, mortices, chases and the like in the structure (ACFO) inspection, testing and commissioning of the complete Fuel Supply System ; all as described in the Particular Specification and Part D of the General Specification for Mechanical Installations (ACFO) inspection, attendance, operation and maintenance during Maintenance Period ; all as described in the Particular Specification and Sections E2 to E4 of the General Specification for Mechanical Installations (ACFO) providing all necessary power and water, diesel, gas and fuels in connection with testing, commissioning and maintenance (ACFO) particular requirements on inspection and testing as described in Section C4.6 of the General Specification for Mechanical Installations (ACFO)

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/5

To C olle ction

$

FUEL SUPPLY SYSTEM DESIGN, SUPPLY AND INSTALL FUEL SUPPLY SYSTEM - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Mechanical Installations (ACFO) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Mechanical Installations (ACFO) providing Operation and Maintenance (O&M) Manuals and User Manuals ; all as described in the Particular Specification and Section A4.4 of the General Specification for Mechanical Installations (ACFO) training of users and operation and maintenance agents as described in the Particular Specification and Section E1 of the General Specification for Mechanical Installations (ACFO) provding sample boards as described in Section A3.7 of the General Specification for Mechanical Installations (ACFO) supplying pipe sleeves for fixing by other trades through walls, floors and ceilings (ACFO) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

G

(ACFO)

-

item

-

H

supplying cable sleeves for fixing by other trades through walls, floors and ceilings (ACFO) supplying and fixing fire stopping to walls and floors (ACFO)

-

item

-

J

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/6

To C olle ction

$

FUEL SUPPLY SYSTEM C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.31/1 MODBQ.31/2 MODBQ.31/3 MODBQ.31/4 MODBQ.31/5 MODBQ.31/6 ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.31 - FUEL SUPPLY SYSTEM To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.31/7

Bill Nr. MODBQ.32 SWIMMING POOL WATER TREATMENT INSTALLATION WATER CIRCULATION AND FILTRATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# Polyethylene pipes and fittings ; medium density ; BS EN 12201-1 to BS EN 12201-5, ISO 4427-1 and 4427-2, WIS 4-32-17 ; electrofusion socket joints Pipework and fittings ; laid in trenches A * diameter (ACWT) m

Pipework and fittings ; suspended from soffits B * diameter (ACWT) m

Pipework and fittings ; fixed to walls and columns C * diameter Extra over pipework for D E F * bends * tees * reducing tees Bronze valves Ball float valves G * diameter Drain valves H * diameter Cast iron valves Gate valves J * diameter (ACWT) nr (ACWT) nr (ACWT) nr (ACWT) (ACWT) (ACWT) nr nr nr (ACWT) m

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/1

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION WATER CIRCULATION AND FILTRATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Check valves A * diameter Motorized control valves and solenoid valves B * diameter Double regulating valves C * diameter (ACWT) nr (ACWT) nr (ACWT) nr

Flow meters ; flow sensors ; integral signal converter / transmitter ; digital display unit ; direct reading Flow meters ; electromagnetic and ultrasonic D to suit * diameter pipes Cast iron strainers Strainers ; double type E * diameter (ACWT) nr (ACWT) nr

Gunmetal automatic air vents ; non-ferrous floats and guides Automatic air vents ; complete with integral lock-shield valves and air release pipe F to suit * diameter pipes Inlet fittings ; ABS Adjustment type ; minimum 25 diameter orifice G to suit * diameter pipes (ACWT) nr (ACWT) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/2

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION WATER CIRCULATION AND FILTRATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Hydro spa jets ; complete with socket end or threads ; ABS Adjustment type ; capable to be deflected at 15 degrees at any direction to the horizontal axis A to suit * diameter pipes Gutter drains ; ABS Gutter dome scum drain ; designed gratings B to suit * gutter channel Main drain gratings ; ABS Squared type ; grating covers ; installed on concrete sump pit ; twin drain outlets C flow control down to 4 l/s at a maximum velocity of 0.5 m/s Vacuum fittings ; ABS Body and plug ; connection for flexible vacuum hose ; adaptor with 38 FIP for pipe connection D to suit * diameter pipes Overflow drains In form of skimmer box ; streamlined ABS grating with thread for UPVC overflow drain pipes connection E to suit * diameter pipes Channel outlets ; ABS 50 diameter connection ; * x * gratings F to suit * diameter pipes Skimmers ; rugged ABS ; 5 thick Moulded type G to suit * diameter pipes (ACWT) nr (ACWT) nr (ACWT) nr (ACWT) nr (ACWT) nr (ACWT) nr

(ACWT)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/3

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION WATER CIRCULATION AND FILTRATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Thermometers Thermometers ; mercury-in-glass type A to suit * diameter pipes Pressure gauges Pressure gauges B to suit * diameter pipes Energy meters Energy meters C to suit * diameter pipes Water level controllers Water level controllers ; all necessary accessories D mercury float type (ACWT) nr (ACWT) nr (ACWT) nr (ACWT) nr

Fibre-glass water tanks ; complete with valves, drains, vents, overflows, covers, supports, accessories and connections Water tanks ; stainless steel internal and external cat ladders E * litres capacity (ACWT) nr

Water pump sets ; direct driven by electric motors ; type-tested ; complete with cast iron / stainless steel Grade 316 / bronze# split casings ; stuffing boxes ; drain piping and all accessories ; centrifugal type ; volute casing ; as described in the Particular Specification and drawing nr. * Main circulation pump sets F water flow rate * l/s ; differential static pressure * kPa (ref. *) (ACWT)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/4

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION WATER CIRCULATION AND FILTRATION SYSTEM ; INTERNALLY / IN PLANT ROOM / EXTERNALLY# (Cont'd) Sand filters ; electrically welded shell ; supported nozzles, balance tank, stainless steel nozzle plates and filtering media supports, internal distribution and draw-off trough ; flanged inlets and outlets, wash-in, drains and air connections, manholes, necessary filtering media, filter supporting feet and all necessary accessories ; as described in the Particular Specification and drawing nr. * Sand filters ; air scoured sand pressure type ; low to medium filtering rate A capacity * l/hr (ref. *) (ACWT) nr

DESIGN, SUPPLY AND INSTALL COMPRESSED AIR SUPPLY AND BACKWASHING SYSTEM ; IN PLANT ROOM Air compressors ; delivery air pressure gauges ; oil pressure gauges ; suction filter and silencer ; air-oil separator ; oil heater and ancillary control accessories ; acoustic enclosure ; pipeworks and fittings, valves, switches, controls and interlocks ; control panels (control panels measured separately) and supports ; all necessary accessories, wirings and conduits ; as described in the Particular Specification and drawing nr. * Air compressors, air-cooled rotary air type, pressure lubrication, direct couple motor B duty compressors ; air flow rate 50 m/h per unit filter area (ACWT)

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/5

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION

DESIGN, SUPPLY AND INSTALL OZONE GENERATION SYSTEM ; IN PLANT ROOM Reaction tanks ; electrically welded mild steel / stainless steel Grade 316 (low carbon)# ; complete with automatic air vents, drains, valves, flow meters, maintenance platform, supports, accessories and connection ; as described in the Particular Specification and drawing nr. * Reaction tanks A * litres (ACWT) nr

Water pump sets ; direct driven by electric motors ; suitable type ; as described in the Particular Specification and drawing nr. * Booster pump sets for ozone generation system B water flow rate * m3/hr ; differential static pressure * kPa (ref. *) (ACWT) Carbon filter tanks ; electrically welded mild steel / stainless steel Grade 316 (low carbon)# ; supported nozzles, nozzle plates and filtering media supports, internal distribution and draw-off trough, flanged inlets and outlets, wash-in, drain and air connections, manholes, necessary filtering media, maintenance platform, supports and all necessary accessories ; as described in the Particular Specification and drawing nr. * Carbon filter tanks C * litres (ACWT) nr

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/6

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION DESIGN, SUPPLY AND INSTALL OZONE GENERATION SYSTEM ; IN PLANT ROOM (Cont'd) Ozonator ; full vacuum unit ; duty and standby air dryers ; ozone generators ; high tension transformers, control panels (control panels measured separately) ; associated pipings, wirings and control ; all necessary accessories ; safety devices ; as described in the Particular Specification and drawing nr. * Ozonators ; compact construction cabinet ; lockable doors A * g/hr (ref. * ) (ACWT) nr

Mixing equipment ; comprising mixers, mixing chambers, ozone eductors, booster pumps, manometers, piping, valves, pressure gauges and all necessary accessories ; as described in the Particular Specification and drawing nr. * Mixing equipment for mixing and dissolving ozone into water stream B to suit system pressure (ACWT) nr

Ozone destroyers ; activated carbon filling, thermal or heated catalytic destructor, exhaust vent pipes and all necessary accessories ; as described in the Particular Specification and drawing nr. * Ozone destroyers ; maintaining * months operation at design flow C design flow * (ACWT) nr

ORP analyzers ; sensors, liquid crystal display ; all necessary accessories and signals transmission facilities ; as described in the Particular Specification and drawing nr. * ORP analyzers D to suit system (ACWT) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/7

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION

ULTRA VIOLET DISINFECTION SYSTEM ; IN PLANT ROOM Ultra violet disinfection system ; self-contained UV chambers, hydraulically factory tested unit, temperature sensors, UV intensity monitor, stainless steel cover end plate ; all pipework and connection, automatic cleaning device, control and monitoring provisions ; necessary accessories ; as described in the Particular Specification and drawing nr. * Ultra violet disinfection system ; UV wavelength cover spectrum 220 nm to 400 nm A to suit design swimming pool water turnover rate (ACWT) CHEMICAL TREATMENT ; IN PLANT ROOM Chemical treatment ; chemical metering pump sets ; chemical tanks ; outlets, pipings, valves, overflows, level indication, level electrodes ; warning notice and instructions ; all necessary accessories and connections ; adequate protective clothing and items for handling chemicals ; as described in the Particular Specification and drawing nr. * Chemical treatment of pool water B by aluminium sulphate (alum) dosing

-

item

-

(ACWT)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/8

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION

MIXED OXIDANT DISINFECTION SYSTEM ; IN PLANT ROOM Mixed oxidant disinfection system ; electrolytic cell mixed oxidant generators (ref *) ; twin tower softeners, brine generator tanks, oxidant tanks, pressure switches, solenoid valves, pressure regulators, associated pipings, wirings, control panels (control panels measured separately) ; automated control and diagnostics facilities ; conduits and all necessary accessories ; as described in the Particular Specification and drawing nr. * Mixed oxidant disinfection system ; hydrogen gas detection facilities, blowers filters, gas detectors, air vents and extraction fans A to suit designed application UNDERWATER LIGHTING INSTALLATION ; INTERNALLY AND EXTERNALLY Final circuits ; PVC cables ; including all necessary cabling and conduit facilities ; watertight power supply system From distribution board ref. * ; * core cables ; * mm2 B lighting points (ACWT) nr (ACWT) item -

Luminaires ; cast bronze submersible light fittings ; IP 68, BS EN 60529 ; 12V/24V lamp bulbs ; control gears and ballasts ; isolation transformers housed in metal enclosure ; connections to submersible PVC cables and watertight conduit ; earthing and bonding ; provision of all necessary component parts, neoprene gaskets and necessary fixings Submersible light fittings ; water proof and vandal proof type ; suitable for operation at the required water depth ; all necessary accessories ; fixing to walls and columns ; tilting upward 10 degrees to vertical ; recessed mounted C * nr. x * W (ref. *) (ACWT) nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/9

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION UNDERWATER LIGHTING INSTALLATION ; INTERNALLY AND EXTERNALLY (Cont'd) Timer switches ; ON/OFF control operation ; all necessary cabling and conduit facilities Timer switches ; with overriding facilities A timer switches ; 24-hour programmed

(ACWT)

nr

SWIMMING POOL WATER CIRCULATION, FILTRATION AND DISINFECTION SYSTEMS ELECTRICITY SUPPLY ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY PVC cables ; run in concealed conduits with draw wires From isolators (isolators measured separately) B * x * mm2 ; to water circulation and filtration system pump control panel (ref. *) (ACWT) * x * mm2 ; to compressed air and backwashing system control panel (ref. *) (ACWT) * x * mm2 ; to ozone booster pump control panel (ref. *) (ACWT) * x * mm2 ; to ozonator control panel (ref. *)

nr

C

nr

D

nr

E

(ACWT)

nr

F

* x * mm2 ; to chemical treatment control panel (ref. *) (ACWT) * x * mm2 ; to mixed oxidant disinfection system control panel (ref. *) (ACWT)

nr

G

nr

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/10

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION

SWIMMING POOL WATER CIRCULATION, FILTRATION AND DISINFECTION SYSTEMS CONTROL ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY Control panels ; stainless steel construction ; vermin proof ; IP 54 enclosures ; all as described in the Particular Specification and drawing nr. * Control panels ; located in * room A water circulation and filtration system pump control panel (ref. *) (ACWT) compressed air and backwashing system control panel (ref. *)

nr

B

(ACWT)

nr

C

ozone booster pump control panel (ref. *) (ACWT) ozonator control panel (ref. *) (ACWT)

nr nr

D E

chemical treatment control panel (ref. *) (ACWT) mixed oxidant disinfection system control panel (ref. *) (ACWT) Levels of control ; Level 2 - centralized control ; all as described in the Particular Specification and drawing nr. * Level 2, manual control in Level 1 and automatic control system (ACS) for equipment, pumps, valves and devices, local control panels (local control panels measured separately) ; 1.6 thick stainless steel supervisory panels ; all electrical interlocks ; visual and audible indication, gas leakage detection, electronic programmable logic controller, real time clock, backup battery, approved cable and conduit facilities

nr

F

nr

G

Level 2 control

(ACWT)

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/11

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION

SWIMMING POOL WATER TREATMENT INSTALLATION - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY The following items in respect of the whole Swimming Pool Water Treatment Installation Allow for A marking the positions of holes, mortices, chases and the like in the structure (ACWT) off-site and on-site inspection, testing and commissioning of the complete Swimming Pool Water Treatment Installation ; type-test certificates ; all as described in the Particular Specification and Part D of the General Specification for Swimming Pool Water Treatment Installation (ACWT) providing all electricity, main water and other fuels in connection with preliminary runs, full adjustments, testing, commissioning and maintenance (ACWT) providing maintenance for the complete Swimming Pool Water Treatment Installation as described in the Particular Specification and Section E.1 of the General Specification for Swimming Pool Water Treatment Installation (ACWT) providing installation drawings ; all as described in the Particular Specification and Section A4.2 of the General Specification for Swimming Pool Water Treatment Installation (ACWT) providing as-built drawings ; all as described in the Particular Specification and Section A4.3 of the General Specification for Swimming Pool Water Treatment Installation (ACWT)

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

-

item

-

F

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/12

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION SWIMMING POOL WATER TREATMENT INSTALLATION - SUNDRIES ; INTERNALLY, IN PLANT ROOM AND EXTERNALLY (Cont'd) A providing Operation and Maintenance (O&M) Manuals and Users Manuals in prescribed time ; all as described in the Particular Specification and Section A4.4 of the General Specification for Swimming Pool Water Treatment Installation (ACWT) providing training to Employer's staff as described in Section E.2 of the General Specification for Swimming Pool Water Treatment Installation (ACWT) providing sample boards in site office of Architect's Representative as described in the Particular Specification and Section A3.7 of the General Specification for Swimming Pool Water Treatment Installation (ACWT) supplying pipe sleeves for fixing by other trades through walls, floors and ceilings (ACWT) supplying conduit sleeves for fixing by other trades through walls, floors and ceilings

-

item

-

B

-

item

-

C

-

item

-

D

-

item

-

E

(ACWT)

-

item

-

F

supplying cable sleeves for fixing by other trades through walls, floors and ceilings (ACWT) supplying and fixing fire stopping to walls and floors (ACWT)

-

item

-

G

-

item

-

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/13

To C olle ction

$

SWIMMING POOL WATER TREATMENT INSTALLATION C O L L E C T I O N Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. Page No. MODBQ.32/1 MODBQ.32/2 MODBQ.32/3 MODBQ.32/4 MODBQ.32/5 MODBQ.32/6 MODBQ.32/7 MODBQ.32/8 MODBQ.32/9 MODBQ.32/10 MODBQ.32/11 MODBQ.32/12 MODBQ.32/13 ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ......................................

Bill Nr. MODBQ.32 - SWIMMING POOL WATER TREATMENT INSTALLATION To Summary $

MODEL BILL OF DESCRIPTION ASD STANDARD BILLS MODBQ.32/14…...

Similar Documents

Premium Essay

Bill

...Bill Davis Davis 1 Professor ENG 111 15 September 2010 Not Your Typical Fast Food Restaurant When you first look think of McDonald’s, you probably think of just a place to pick up a quick, cheep meal. In some cases, this is true. McDonalds is one of the most widely known and popular fast food restaurants around the world. It may not be a place for a romantic date, but there are not too many places you can go have a dinner with your family with the bill coming out to be under twenty dollars. Sure the food may be unhealthy, but it is the cheapest and most efficient route to satisfying your appetite. This may be why McDonald’s has become such a powerful food chain. But after visiting I realized the many different features that make this restaurant so attracting to people. Around lunchtime at noon, I walked across the parking lot, I noticed the drive through was packed with people just waiting to get their meals and get on the road. So I walked inside the doors of the McDonald’s, passed the cashier, and took a seat in one of the booths in the dining area. The booths were big and comfortable and they were all along walls of the dining area. This area was designated for people that wanted to sit down and enjoy their meals. People are spread out around the tables and booths far enough to where they are not invading other peoples conversations. ...

Words: 947 - Pages: 4

Premium Essay

Modes

...Rhetorical Modes Matrix Rhetorical modes are various methods for effectively communicating through language and writing. Complete the following chart to identify the purpose and structure of the various rhetorical modes used in academic writing. Provide at least two tips for writing each type of rhetorical device. | |Purpose |Structure |Tips | |Rhetorical mode |Explain when or why each |Explain what organizational method works |Provide two tips for writing | | |rhetorical mode is used. |best with each rhetorical mode. |in each rhetorical mode. | |Narration |The purpose of narrative writing |A strong narrative essay, containing |--Phrases and words related to| | |is an extensive form or |details of the setting, characters, and |the human senses attract the | | |storytelling. It can either be |situations relevant to the conflict of the|audience’s attention. | | |factual or fictional; it depends |story to engage the audience. It gives the| | | |on the purpose of the author, such|audience a vivid illustration of what is |--Minor characters help | | |as biographies or memoirs. |occurring. An essay of this nature......

Words: 1000 - Pages: 4

Free Essay

Mode of Transport

...same production path. Example: A car company that chose to expand into tire manufacturing, which would fit how you've defined vertical integration. Horizontal relationship is when a business tries to become a monopoly by buying other companies that hold similar products, and essentially acquiring the competitors so that they become a monopoly. Example: hot dog vendor choosing to expand and offer hamburgers. Who's already established who wanted to expand to choose to offer another popular food item, in this case hamburgers. 4a) Describe the various stages in a carrier selection decision process. It consists of twofold process. 1. The firm selects a transportation mode which include basic mode of rail, water, truck, air and pipeline. 2. To select a specific carrier from within the chosen mode or intermodal form by choosing the legal carrier type of common, regulated, contract, exempt or private. 4b) Explain each of the important determinants and consideration for selecting a carrier. Transportation cost - Important criterion such as rate, minimum weights, loading and unloading facilities, packaging and blocking, damage in transit and special services from a carrier. Transit time – Time elapsed from the time the consignor makes the goods available for dispatch until the carrier delivers same to the consignee. Reliability - Refers to the consistency of the transit time a carrier provides. Capability – refers to the carrier’s ability to provide......

Words: 989 - Pages: 4

Free Essay

Bill

...ECPSC- 2013 CURRENT AFFAIRS HANDOUT NO 13 LOKPAL BILL 1. Background. (a) The Administrative Reforms Commission (ARC) while recommending the constitution of Lokpal was convinced that such an institution was justified not only for removing the sense of injustice from the minds of adversely affected citizens but also necessary to instill public confidence in the efficiency of the administrative machinery. Following this, the Lokpal Bill was for the first time presented during the fourth Lok Sabha in 1968, and was passed there in 1969. However, while it was pending in the Rajya Sabha, the Lok Sabha was dissolved, and so the bill was not passed at that time. (b) The bill was revived in 1971, 1977, 1985, 1989, 1996, 1998, 2001, 2005, 2008 most recently in 2011. Each time, after the bill was introduced to the house, it was referred to some committee for improvements a joint committee of parliament, or a departmental standing committee of the Home Ministry, and before the government could take a final stand on the issue, the house was dissolved. Several flaws have been cited in the recent draft of the Lokpal Bill. Meanwhile the activists of India Against Corruption (IAC) have prepared a draft for the bill called Jan Lokpal Bill. 2. Composition of Lokpal. The Lokpal will be a three member body with a chairperson who is or was a chief justice or Supreme Court judge, and two members who are or have been high courts judges or chief justices. The basic framework of......

Words: 944 - Pages: 4

Free Essay

Kony 2012

...How did the video Kony 2012 by Invisible Children Inc. become so popular within a few days and why was the hype over just as quickly? Abstract This short paper is concerned with the popularity of the video Kony 2012. We will both analyze the popularity of and the criticism on the content of the video, by examining how the video became so popular, focusing on the usage of social media, and how the criticism on the video evolved. Next to the explanation of the popularity of the video and the criticism on the video, we will address the positive and negative aspects of Kony 2012. Introduction There is one video on YouTube, launched on the 5th of March 2012, with more than 93 million views, evidenced to be the “fastest spreading viral video of all time” (Steel in Cavanagh, 2012). This video is named Kony 2012, after the man Joseph Kony, number one criminal in the world (Invisible Children, 2012). Kony 2012 focuses on the war in Northern Uganda, between the Lord’s Resistance Army founded by Joseph Kony and the citizens of Uganda. In 1988, Joseph Kony founded the LRA, with the aim to clean the nation spiritually (Blattman, 2009). Because not many people joined the army by free will, the army started abducting people. When in 1995 the recruitment got stronger and stronger, they started to abduct on a larger scale. From 1995 to 2004 they kidnapped 60,000 to 80,000 younger people (Blattman, 2009). In the video, Joseph Kony is accused of abducting youth, forcing them to kill their......

Words: 2328 - Pages: 10

Premium Essay

Bill

...even politics. At the same time, the most successful leaders combine the leadership in different domains such as technologies and business. In this respect, it is possible to name Bill Gates as one of the most successful leaders of the present epoch. In fact, Bill Gates managed to successfully combine his talent as a successful IT specialist with the qualities of a successful business leader. Nowadays, Bill Gates is considered to be one of the most successful people in the world. At the same time, if his success may be measured in financial terms, than, unquestionably, he is the most successful person because, according to the recent studies, his wealth constituted about $56 billion that is the largest fortune a businessman can have in the modern world. In such a situation, it is really important to carefully analyze his work and career as well as his personality, in order to clearly find out the major reasons that helped him to achieve such a tremendous success. At the same time, it is necessary to pay attention to the fact that along with a number of strengths of Bill Gates as a leader, he still has certain weaknesses that is quite natural since, as any other human, Bill Gates is also not a perfect or almighty being. Reasons for success of Bill Gates On analyzing the life and work of Bill Gates, it is necessary to point out that he has achieved really great results and he may be considered as a very successful person judging from his achievements in business and......

Words: 5755 - Pages: 24

Premium Essay

Corporations Legislation Amendment (Audit Enhancement) Bill 2012

...A major step in the direction towards improving the audit quality and at the same time ensuring that Australia’s regulatory framework is in line with international best practice; is the proposed Corporations Legislation Amendment (Audit Enhancement) Bill 2012. Various measures and reforms have been drafted in the legislation with a view to achieve this purpose and also to ensure that the audit regulation framework is in line with the dynamic environment Australia is operating in. Let us discuss these measures to see what they mean and refer to, and form an opinion as to why were these introduced. The first measure requires the audit firms to publish an annual transparency report in the event that they conduct audit of 10 or more significant entities. This is applicable to those audit firms which carry out an audit of 10 or more than 10 significant entities in an year. These entities may be listed companies or other listed registered schemes. The auditor in such a case is required to publish an annual transparency report on the auditor’s website as well as with the ASIC. The contents of the transparency report are required to be as per the provisions of Sec 332B of the Corporations Act and other regulations. These mainly contain information about the ownership, structure, governance and other factual information relating to such audit firms. The idea is that information regarding such audit firms who are carrying audit of large entities is available to their existing as well...

Words: 1274 - Pages: 6

Premium Essay

Bill

...Vehicle Bill of Sale For the Exact Sales Amount indicated below, I the Seller, do hereby sell and transfer ownership of the Vehicle described below to the Buyer, acknowledge full receipt of payment, certify that I have the authority to sell it, warrant the Vehicle to be free of any liens or encumbrances, and certify that all information given is true and correct to the best of my knowledge. Vehicle Information |VEHICLE IDENTIFICATION NUMBER (VIN#) |ENGINE NUMBER (if applicable) |LICENSE PLATE # | |YEAR |MAKE |MODEL |BODY STYLE (2 Dr, 4 Dr, etc) | |ODOMETER READING (Miles) |SALE DATE |EXACT SALES AMOUNT | | | |$ (USD) | Conditions and Warranty The Seller has no knowledge of any hidden defects in and to the Vehicle, and believes to the best of the Seller's knowledge that the Vehicle is being sold in good operating condition "AS-IS," meaning that there is no warranty for any defects and that all repairs are the responsibility of the Buyer. Seller allows the Buyer ______ days to have the Vehicle inspected by an independent mechanic, and agrees to cancel the sale if the inspection is unsatisfactory...

Words: 351 - Pages: 2

Free Essay

2012

...შესაძლებელია სულ ადვილად მილიონებში დათვლა). ესე დაუბარეს, რომ როგორც კი დათქმული დრო მოვიდოდა (წითელი მონიშნუილები რომ ერთმანეთს დაემთხვევა), მაშინ დაბრუნდებოდნენ და რაც შექმნეს, იმას შეამოწმებდნენ. გამოთვლის მიხედვით ეს მოხდება 2012 წლის დეკემბერში.მაიას ტერიტორიაზე ნაპოვნია ორი კალენდარი: ერთი 365 დღიანი ციკლით და მეორე 260. პირველი ციკლი გასაგებია, მაგრამ მეორე ციკლი უცნობია მეცნიერებისთვის, რადგანაც ეს ციკლი არ ემორჩილება დედამიწის კანონზომიერებებს (ჩემი აზრით, ეს მეორე ციკლი გამოხატავს დროის მსვლელობას პლანეტა სირიუს ბ-ზე, სადაც გაფრინდნენ მაიას ტომისს მასწავლებლები). მაიას ტომს ჰქონდა მთვარის და მზის ციკლები, მაგრამ მათ არ ქონდა ის სისტემა, რასაც ჩვენ დღეს ვიყენებთ დღეების ნუმერაციისას (იგულისხმება ორშაბათი, სამშაბათი და ა.შ.) როგორც დრეზდენის კოდექსი გვამცნობს, მაიას ათვლის წერტილი იყო ღმერთის კუკულკანის (იგივე კეცალკოატლის ან კუკუმაცის) დედამიწაზე ჩამოსვლა.ვარაუდობენ, რომ მისი ჩამოსვლა მოხდა 3114 წლის 11 აგვისტოს ჩვენს ერამდე, რადგან კალენდრის წითელი ნიშნულები მაგ დროს ხვდება ერთად, ანუ ეს იყო ათვლის წერტილი. ასევე 2012 წლის 22 დეკემბერს ჯდება ეგ წერტილები ერთად .პრობლემა იმაშია, რომ რა ციკლით ითვლიდნენ მაიას ტომის ხალხი, ბოლომდე გაურკვეველია.ეს ფაქტია, რომ ამ თარიღს პირველი ბანაკის წარმომადგენლები უნდობლად ეკიდებიან. ერთი საგულისხმო ფაქტი მეტყველებს მარტო 2012 წლისთვის – პოპულ ვუში ნახსენებია რომ ღმერთები ჩამოვლენ მაშინ, როცა დედამიწის ღერძი კვლავ დაუბრუნდება იდეალურ მდგომარეობას.ეხლა რას ნიშნავს ეს – დააკვირდით ამსურათს: ხომ ხედავთ ღერძს? ყოველ წელს, ამ ღერძის......

Words: 794 - Pages: 4

Premium Essay

Rh Bill

...The Responsible Parenthood and Reproductive Health Act of 2012 (Republic Act No. 10354), informally known as the Reproductive Health Law or RH Law, is a law in the Philippines, which guarantees universal access to methods on contraception, fertility control, sexual education, and maternal care. While there is general agreement about its provisions on maternal and child health, there is great debate on its mandate that the Philippine government and the private sector will fund and undertake widespread distribution of family planning devices such as condoms, birth control pills, and IUDs, as the government continues to disseminate information on their use through all health care centers. Passage of the legislation was controversial and highly divisive, with experts, academics, religious institutions, and major political figures declaring their support or opposition while it was pending in the legislature. Heated debates and rallies both supporting and opposing the RH Bill took place nationwide. The Supreme Court delayed implementation of the law in March 2013 in response to challenges. On April 8, 2014, the Court ruled that the law was "not unconstitutional" but struck down eight provisions partially or in full.[ Criticism[edit] Opponents of the bill argue that: People's freedom to access contraceptives is not restricted by any opposing law, being available in family planning NGOs, stores, etc. The country is not a welfare state: taxpayer's money should not be......

Words: 2135 - Pages: 9

Premium Essay

Different Modes of Investment of Ibbl

...[pic] ASA Tower, 23/3 Bir Uttam A.N.M. Nuruzzaman Sarak, Shymoli,Dhaka. 1207. Internship Report On “Modes of Investment of IBBL” Submitted To Dr. Md. Abdul Hye Professor & Dean Faculty of Business ASA University Bangladesh (ASAUB) Submitted By Sheikh Refath Jessan ID. No: 091-12-0293 Section: ACT-6A Major: Accounting Batch: 6th Program: BBA ASA University Bangladesh (ASAUB) Date: December 30, 2012 December 30,2012 Dr. Md. Abdul Hye Professor & Dean, Faculty of Business ASA University Bangladesh (ASAUB). Dear Sir: SUBMISSION OF INTERNSHIP REPORT I have the pleasure to submit the internship report on ‘Modes of Investment of Islami Bank Bangladesh Limited (IBBL)’ for your kind perusal and evaluation. It is a matter of immense pleasure for me to have the opportunity to prepare internship report on, ‘Modes of Investment of Islami Bank Bangladesh Limited (IBBL)’. I am grateful to you for allowing me to carry out such work and necessary co-operation and assistance from you during my report. I believe that the knowledge and experiences acquired while conducting this study will help me in many ways and the readers as well in future. I have tried my best to accommodate my ideas and findings as specifically as you asked about within the time frame and resources available I would like to mention that there might be some errors in the report...

Words: 32103 - Pages: 129

Free Essay

Network Modes

...Network Modes Zachary Gurley NTC\405 August 10, 2015 Bradley Rush Network Modes Throughout time, Ethernet has transformed computer systems into a network of computing devices with unlimited potential. Before the days of Ethernet, networking was not very effective or efficient. The only way to transfer data before this time was to go from device to device and manually move files. Definitely not what I would call a good means of transporting data compared to the ways of today. However, during those times, you had to work with what you had. All of this was done before Ethernet was an industry standard. However, more recently, people have utilized the potential of Ethernet to move frames or packets across a network. Because of Ethernets adequate performance, and superior economics, it won the heart of network administrators and most people using networking equipment. Today, Ethernet focuses on wired LAN technology and continues to grow in speed and sophistication. Despite Ethernet’s sophistication, its means of communication is done in a systematic manner. For instance, Ethernet sends data across a network in frames or packets. Data is wrapped in six layers of assembly which consist of first a Preamble, next a recipient MAC address, followed by a senders MAC address, length, (Data), Pad, and the cyclic redundancy checker for errors of missed packets. Lastly, but more importantly, the foundation of Ethernet are found at the physical and data link layer of the OSI......

Words: 1194 - Pages: 5

Free Essay

Transportation Mode

...company who delivers documents, parcels and letter from customers to receiver based on their speed, security, tracking service and specialisation (Drew. J, 2013). Basically the cost for a courier service included transportation, warehousing & packaging, inventory, and order processing & administrative. Transportation cost is the main cost for operation in courier service industry, it will increase the profit of a firm if they reduce the transportation cost. Most of the firm are depend on motor vehicle to send the parcel in order to reduce their transportation cost (Kartikeyan & Elango, 2014). 2.1 Procedures Figure 2.1.1 To complete a courier services, there are few steps to be done (Industry Skill Council Australia, 2012). First, clarify and organise pick-up and delivery operation. Mean record all the requirement of customer in detail included pick-up and delivery point, size of goods and resources required for pick-up and delivery. Next, plan and analyse the distance, delivery time, resources used to pick-up and delivery. Besides that, pick-up the items in specified time and make sure the items are in good conditions. After picked up items and then delivery the items in specified time and kept items secure to avoid from any damage. Make sure send to the right address. Once the items hand up to receiver, request for signature on the invoice and collect the cash if necessary. Lastly, record the courier delivery operation according the whole procedure......

Words: 2911 - Pages: 12

Premium Essay

Entry Modes

...University of Glasgow Adam Smith Business School International Business & Entrepreneurship Research Method MGT 5174 A Comparative Study of Entry Modes Adopted by Sainsbury’s and M&S in China Based on Resource-based View Theory Yuyu Xiong 2203873 07/24/2016 Word Account: 3013 Table of Contents 1. Introduction……………………………………………………………………..…3 1.1 Background ………………………………………………………………..…3 1.2 Research Questions …………………………………………………………..3 1.3 Research aim and objectives………………………………………………… 4 2. Literature Review ……………………………………………………………..….4 2.1 Timing ………………………………………………..…..4 2.2 Scale of Entry ………………………………..…..……5 2.3 Steps taken before choosing entry modes………………………………..…. 2.4 Entry Modes……………………………….……………………………..…. 2.5 Factors that influence the choice of entry mode…………………………..…. 3. Methodology…………………………………………………………………..….6 3.1 Research philosophy………………………………………………….………6 3.2 Research......

Words: 3482 - Pages: 14

Free Essay

Bill

...More views against the RH bill are pouring in. Apparently they have not been considered by the Lower House Committee before the bill was endorsed to the entire body for approval in the plenary session. Hence for the enlightenment of our legislators and the entire citizenry, presented here are some more of these views, one of them coming from a lawyer Atty. Rex A. Salvilla who clearly and ably refutes some stand of the bill’s advocates: “First, the advocates say that the opponents of RH bill are anti-poor for allowing population explosion. This is not true because the opponents, like the advocates are also for population control. Both differ only on the method of control – the advocates thru condom which cost money while the opponents thru natural family planning which costs not a single centavo but only mere discipline on the part of the spouses So, who is anti-poor? It is the advocates. Second, the advocates say that they are pro-choice. This is not also true. The draft bill contains a penal clause punishing by imprisonment and/or fine those obstructing the use of condoms and promoting family planning. Is this not like tying a person to a post and telling him, “You are free”? So, where is “pro-choice” here? In fact, the bill is a “no-choice” piece. Third, the advocates say that the Pope supports condom use. This is interpreting the Pontiff out of context. The Pope simply provided an exception in the same way that God has also provided exceptions to His own commandments.......

Words: 990 - Pages: 4

Dragon Ball Super: Part 6 | 下載 XAPK | FOX College Basketball 2018/19