Premium Essay

Stryker Corporation

In: Business and Management

Submitted By lizzie0307
Words 400
Pages 2
1. The proposal of option #3 is an in-sourcing method. It constructs a new building in Kalamazoo and produces the PCBs by itself. Once the facility was up, the company can use it to run the business and provide the PCBs to other departments.

The main benefit of this proposal is the high reliability because the company would have high control degree based on the quality and delivery of their own products. If the company implements this proposal, the account payable period to the manufacturer would increase from 30 days to 120 days. The fact that payment was not due for 120 days means that its customers typically would pay Stryker for finished goods before Stryker was required to pay its materials supplier. This benefit would increase the company’s cash flows and liquidity. Also, the managers and engineers already master the knowledge of using the equipment and systems needed to produce the PCBs and familiar with the manufacturing equipment. Therefore, the Stryker can use its own employees rather than hiring other people outside the company or training their own employees to produce the PCBs, resulting in the low labor cost. Last but not the least, the company already has its own factory that can be used for constructing the new facility. So the Stryker doesn’t need to buy or rent the factory for this proposal, which lower its equipment cost.

Although this in-sourcing proposal has a lot of benefits, it also has some potential risks. The biggest risk is that the company has to invest large amount of money at the beginning, which may results in the company’s shortage of the cash flow, even worse results in the company’s bankruptcy.

Comparing with the option #1 and option #2, the option #3 would have higher long-term return and higher reliability. The option #3 is the best choice because it avoids the risk of other weak suppliers, comparing with the other…...

Similar Documents

Premium Essay

Stryker Corporation: in-Sourcing Pcbs

...HARvAR D I " , srNEss I , . " Tt . W-rEr 5gor6ffi, TIMOTHY A. LUEHRMAN Stryker Corporation: In-sourci In late May 2003 executives in Stryker Corporation component of many of Stryker Instrument,s medica from a small number of contract manufacturers. more than 910 million in each of the next two Instruments business grew. In recent years, been unsatisfactory with respect to quali$ repeatedly found itself looking for new su bankruptcy, a financially weak suppl appearance of several current suppli Stryker Instruments' establish a Stryker was Stryker ucts. Currently, Stryker purchased ts had resolved to address the issue. nt basic sourcing policy for PCBs, but with important tect against future disruptions by acquiring safety stocks of rcing of all electronic assemblies. Option #2 would boost supplier of PCBs and ility for supplying them. The partnership and incriased business from the supplier, further boosting its reliability. Option #3 was for acture its own PCBs in its own facility near company headquarters in such a facility was up and running, as well. PCBs PCBs ments business anticipated spending an amount that would increase as the of some contract manufacfurers had /or responsiveness and Stryker had lly, contract manufacturers tended to were not uncommon/ and even without reliable. Given recent events and the shaky rs studied three options for improving the situation. Option......

Words: 483 - Pages: 2

Premium Essay

Stryker Corporation Case Study

...Stryker Corporation Case Study Stryker Corporation Case Study Andrew Wyatt Brett Nymeyer Brett Sundberg Josh Ihnen Executive Summary It is 2003 and Stryker Corporation is proposing to build a new facility that would be able to produce a key component (printed circuit boards) in-house instead of outsourcing that activity to suppliers. Currently, Stryker purchases PCBs from a small number of contract manufacturers but recently the suppliers have been underperforming in quality and delivery. The proposed plan would create a high degree of control over this product, ensure quality, and create an economy of scale in the long run. However, this plan also required the most capital outlay in both money and resources. The project would have an initial investment of a new building, capital equipment, and IT infrastructure totaling $6,287,258. However, there would also be cost savings in the long run from decreased purchases from suppliers even after the increased expense of Stryker’s manufacturing costs. To find out if this project offered an adequate return on investment we performed a Net Present Value Analysis and also calculated Internal Rate of Return and Payback Period for years 2003 through 2009. Analysis 1. Does this project make sense? We like the insourcing proposal and think that it makes business sense for several reasons. However, these reasons are based off of the information taken from the case before we analyzed NPV, IRR, or......

Words: 315 - Pages: 2

Premium Essay

Stryker Corporation: in-Sourcing Pcbs

...Stryker Corporation: In-sourcing PCB’s Conclusion: If Stryker consider option 1 and keep safety stock of the electronic board then it will not resolve the problem of quality of input material. It will also increase the cost of inventory which will affect the profitability. But this could resolve the problem of reliable delivery of goods. That is if the supplier is unable to deliver the material in timely manner then they would have enough inventory that they can continue production without any hurdles. If it considers option 2 that is to create partnership with their suppliers then they will be able to receive continuous delivery of goods as well as the supplier will ensure high quality of goods to be delivered. But relying on only one supplier is dangerous if the supplier will be unable to deliver goods due to uncontrollable factors or the partnership will break then they will be in great trouble. It Stryker consider option 3 to manufacture the electronic board internally. They will have a positive NPV of $18.97m due to huge saving in cost of purchasing from contractors. The IRR is far above the 15% discount rate which shows that in case the discount rate reaches at 72% then NPV will be equal to zero. And this is not possible that discount rate reach to 72%. The payback period shows that the investment made in the year 2004 will be recovered in 2 years and 0.6 months, so the return from investment is very high. But the problem is that this is not their core business and...

Words: 781 - Pages: 4

Premium Essay

Stryker

...Case Study of Stryker Corporation 1. (1) Option #3 was for Stryker Instruments to manufacture its own PCBs in its own facility near company headquarters. (2)Benefits for option 3: ● Better control the quality, delivery and cost; ● Maintain the business stability; ● Supply PCBs to other Stryker businesses; ● Be able to implement cost shift and avoid tax; (3) Risks for option 3: ● Carry the inventory; ● Incur large capital outlay and sunk cost; ● Increase headcount, payroll and other expenditures (materials, infrastructure, R&D, maintenance, PP&E and depreciation) of Stryker; ●Bear the risk that the equipment may be outdated; (4) Compared with option #1: ●Benefit: no capital outlay; to some extent can protect future against disruptions with lower cost; flexibility; ●Risk: instability in quality, cost, delivery and responsiveness; Compared with option #2: ●Benefit: can improve quality of the supplies by increasing business with the supplier; ●Risk: the possibility of bankruptcy and weak financial performance of supplier; the sole supplier can strongly affect Stryker’s performance; coordination problem. 2. (1) Followings are the key assumptions of our write up: ● Stryker Instruments incurred all capital expenditures including (construction and improvements, furnishings and non-manufacturing equipment, communication equipment and IT infrastructure and capital......

Words: 281 - Pages: 2

Premium Essay

Stryker Corporation: Capital Budgeting

...Harvard Case Study Stryker Corporation: Capital Budgeting Term Paper Laini Tsang Golden Gate University MS Finance, FI 312 Summer 2013 Stryker’s Capital Budgeting Harvard Case Study Table of Content      Case Background and Summary Pharmaceutical Industry’s Landscape Stryker’s New CERS and why it is “painful”? Propositions Conclusions 2 Stryker’s Capital Budgeting Harvard Case Study Case Background and Summary Founded in 1941 in Michigan, Stryker Corporation is a fast-paced company with continuously exceptional growth rates. Over the last 27 years, the company historically increased revenues by 20%. The company’s culture prides itself on service ethics, integrity, innovations, accountability, and customer relationships; it is one of the world’s leading medical technology companies with history of successful stories. Stryker’s products focus on implants for joint replacement, trauma, spinal surgical products, neurologic and endoscopic equipment. The company has well diversified product portfolios with solid fundamentals. Over the years, the company’s accretive mergers and acquisitions brought operational synergies and cost efficiency, strengthening the pipeline with increasing profitability. This paper examines Stryker’s capital budgeting process (CER – Capital Expense Request) and why this process, after its modifications in 2005, had slowed down the company’s internal capital project requests. From the company’s financials, we can see their......

Words: 1801 - Pages: 8

Premium Essay

Stryker

...1. What are the missions of CERs and the capital budgeting process at Stryker? Mission: Standardize and formalize the capital budgeting process. The CERs and capital budgeting process were implemented so that a more formal process of requesting capital expenditure and approving them would be applied. All this was put in place to support cash flow targets and maintain Stryker’s 20% growth benchmark. To what extent have they been shaped by elements of corporate finance theory? They are heavily influenced by corporate finance theory * All submissions are required to show the net present value (NPV), internal rate of return (IRR) and payback period. * They need to highlight the project’s anticipated outgoing cash flow and earnings effects on the company and describe specific risks that could affect the projects abitily to deliver projects economic results. * Specifically for mergers the CER would include financial analyses of “Best Case” and “Worst Case” scenarios which would include income and cash flow figures. To what extent are they shaped by Stryker’s particular industry, history, and culture? These factors play a role in shaping the CERs and capital budgeting: * Industry: With a growth in the medical industry and an aging baby boomer population Stryker would naturally see a growth. However to continue to achieve this growth a steady or increased rate they would need to establish a method (in this case CERs and capital budgeting process) to...

Words: 1096 - Pages: 5

Premium Essay

Stryker Corporation

...Stryker Case Study 1) CER-The Mission of CERs are to facilitate order and efficiency through a chain of command like structure. In order to efficiently manage M&A for any conglomerate, a multi-level corporate structure is necessary. This ranges from approvals of liaisons, lower management, and board approval depending on the financial size of the decision. The importance of capital budgeting for a company like Stryker is that in order to maintain their 20% growth corporate strategy, they need the assets to do pursue that. That comes in the form of acquisitions, and other business forms such as licensing, investment in PPE, etc. CERs help delegate the work and research required to make smart investments by incorporating multiple requirements which are written out in the CERs. These include a 2 part document that entails an overview of the project, and then the financial analysis that justifies the acquisition in great detail. As per the study, large acquisitions CERs can be multiple volumes in depth. * The CERs involve the use of principles such as Net Present Value. They, on average, require a 5 year future cash flow in the CER. Also they compare IRR and use their 20% growth requirement as a benchmark. They use payback period too, but as far as value goes, takes the backseat to some of the other financial tactics they use. Since the CER is used for all levels of business decisions, the payback can possibly be used in the small dollar investments of......

Words: 1396 - Pages: 6

Premium Essay

Stryker

...Stryker Corporation: in-Sourcing Pcbs Stryker Corporation: In-sourcing PCB’s Conclusion: If Stryker consider option 1 and keep safety stock of the electronic board then it will not resolve the problem of quality of input material. It will also increase the cost of inventory which will affect the profitability. But this could resolve the problem of reliable delivery of goods. That is if the supplier is unable to deliver the material in timely manner then they would have enough inventory that they can continue production without any hurdles. If it considers option 2 that is to create partnership with their suppliers then they will be able to receive continuous delivery of goods as well as the supplier will ensure high quality of goods to be delivered. But relying on only one supplier is dangerous if the supplier will be unable to deliver goods due to uncontrollable factors or the partnership will break then they will be in great trouble. It Stryker consider option 3 to manufacture the electronic board internally. They will have a positive NPV of $18.97m due to huge saving in cost of purchasing from contractors. The IRR is far above the 15% discount rate which shows that in case the discount rate reaches at 72% then NPV will be equal to zero. And this is not possible that discount rate reach to 72%. The payback period shows that the investment made in the year 2004 will be recovered in 2 years and 0.6 months, so the return from investment is very high. But the problem is......

Words: 354 - Pages: 2

Premium Essay

Stryker

...Stryker Corporation: In-sourcing PCBs Stryker Corporation: In-sourcing PCBs Cerutti, Carolina Del Valle Repalde, Angie Samour, Diego Zambrano, Fátima Daniel Ariza Naranjo Evaluación financiera de proyectos UNIVERSIDAD DE LA SABANA ESCUELA INTERNACIONAL DE CIENCIAS ECONÓMICAS Y ADMINISTRATIVAS Chía, Noviembre de 2015 Stryker Case Questions  1. State the business case for option 3, the PCB InSourcing proposal.  Option #3 was for Stryker Instruments to manufacture its own PCBs in its own facility near company headquarters in Kalamazoo, Michigan. Once such a facility was up and running, it might be expanded to supply PCBs to other Stryker businesses as well. The requierements to accept this option are the following: - the larget capital outlay of the 3 options - the largest increment in headcount and payroll - it would have to obtain numerous approvals - a new building - a growth in the production volume - new production costs: materials, variable and fixed costs - payment conditions of: 120 days Of all the options this one was the one that promised the highest degree of control over quality and delivery. 2.Use the projections provided in the case to compute incremental cash flows for the PCB project, as well as its NPV, IRR and payback period.  The projections in the case shows Instruments’ expected expenditures on PCBs for the year 2004 to the year 2009 under the old sourcing strategy using contract manufacturers....

Words: 643 - Pages: 3

Premium Essay

Stryker Corporation

...returned to investors for more than a fixed percentage of the directors based on the interest rate. A guaranteed return to investors at maturity is at principal maturity. About the mechanism firstly is from the perspective of the Islamic jurisprudence and second from the perspective of the higher purpose of Islamic finance and economics. 4.0 Process of the issuance of sukuk The Securities Commission Malaysia (SC) under section 212 of the Capital Markets and Services Act 2007 (CMSA) [2] (Malaysia SC, Introduction, 2011) has determined that such an offer or invitation of sukuk should get approval from the SC began on July 1, 2000. The information given stated by SC is effective starting on August 12, 2011 (Malaysia SC, 2011). Any corporation that wants to offer or having any invitation to issue sukuk must appoint a principal adviser who specifically chose by the SC in the Guidelines on Principal Adviser to help the company to get approval from the SC to issue, offer or invitation of sukuk. (Malaysia S. C., Issuers & Submission of Proposals, 2011) The issuers must submit a set of documents and declarations letter to the SC through the principal advisor. These documents are required to obtain approval from the SC. (Malaysia SC, Appendix, 2011). Two copies and one electronic copy of these documents must be submitted. After SC receive documents and declaration letter within 14 working days, the decision will be made by the SC whether to approve or reject the......

Words: 3837 - Pages: 16

Premium Essay

Stryker Corporation Case Study

...Stryker Corporation Case Study Andrew Wyatt Brett Nymeyer Brett Sundberg Josh Ihnen Executive Summary It is 2003 and Stryker Corporation is proposing to build a new facility that would be able to produce a key component (printed circuit boards) in-house instead of outsourcing that activity to suppliers. Currently, Stryker purchases PCBs from a small number of contract manufacturers but recently the suppliers have been underperforming in quality and delivery. The proposed plan would create a high degree of control over this product, ensure quality, and create an economy of scale in the long run. However, this plan also required the most capital outlay in both money and resources. The project would have an initial investment of a new building, capital equipment, and IT infrastructure totaling $6,287,258. However, there would also be cost savings in the long run from decreased purchases from suppliers even after the increased expense of Stryker’s manufacturing costs. To find out if this project offered an adequate return on investment we performed a Net Present Value Analysis and also calculated Internal Rate of Return and Payback Period for years 2003 through 2009. Analysis 1. Does this project make sense? We like the insourcing proposal and think that it makes business sense for several reasons. However, these reasons are based off of the information taken from the case before we analyzed NPV, IRR, or Payback Period, so they......

Words: 1255 - Pages: 6

Premium Essay

Stryker Corporation Case

...Stryker Corporation Deciding whether to keep outsourcing or in-source PCBs Stryker Corporation has 3 different options regarding the supply of needed PCBs. Option 1: contemplates the fact of keeping the same suppliers but with significant changes in order to assure continuous supply of PCBs and quality. No investment is needed. Option 2: establishing a partner with a single supplier. This way there would be a sole supplier for Stryker established in a new facility near them, this would give more certainty and control over continuous supply and quality standards. Again, no investment is needed. Option 3: in-source the PCB’s, there is a project for investing and owning a plant for producing their own PCB’s, this way they would assure a continuous supply and have 100% control over quality standards. In this case, there is a big amount of capital that should be invested, which is needed to be analyzed in order to see whether it is viable for the company or not. The case present several information regarding expected production costs for in-sourcing and expected purchases for outsourcing. Since there is no projected information of Income Statement, then the only cash flow analysis that can be made is by comparing the efficiency gained by in-sourcing the PCBS compared to the costs of keep buying the PCBs. The case contemplates the projected comparison from 2004 to 2009 of the costs of buying PCBs from an external supplier and the costs of making the PCBs. What we will......

Words: 340 - Pages: 2

Premium Essay

Memo on Stryker

...MEMO Group 4 is recommending investors to hold their stocks in Stryker Corporation. This memo focuses on measures and additional information which support the position not to buy or sell, but to hold Stryker stock. Included are certain of the company’s liquidity and solvency ratios, along with profitability, dividends history and stock ratios. Stryker is a leading medical technology company based in Kalamazoo, MI. More than 2/3 of their sales are within the US, where most products are marketed directly to the medical community. The remaining sales are in over 100 countries through company-owned sales subsidiaries and branches, as well as through 3rd parties. Stryker sells 3 types of cutting edge, advanced technology products: Orthopaedics, Medical Surgery, and Neurotechnology and Spine1. In Stryker’s main revenue-generating product, Orthopaedics, the company is one of five leading competitors globally. Prior to the financial analysis, we highlight three major activities of the company in 2014: firstly, several mergers and acquisitions added expertise, customers and assets, the most intriguing being MAKO, which helps the company build out robotic arm assisted surgery; secondly, a major recall to its hip system occurred due to corrosion; and thirdly, the company continues to spend for patents and R&D. Stryker’s liquidity and solvency ratios appear far from impressive (see ref 1. Liquidity/Solvency). The Current and Debt to Assets ratios point to diminishing......

Words: 867 - Pages: 4

Premium Essay

Stryker Case

...us ed in a spreadsheet, or transmitted in any form or by any means—electronic, mechani cal, photocopying, recording, or otherwise—without the permission of Harvard Business School. TIMOTHY A. LUEHRMAN Stryker Corporation: In-sourcing PCBs In late May 2003 executives in Stryker Corp oration’s Instruments business were actively considering a change in their sourcing strategy fo r printed circuit boards (PCBs), a key electronic component of many of Stryker Instrument’s medi cal products. Currently, Stryker purchased PCBs from a small number of contract manufacturers. The Instrument s business anticipated spending more than $10 million in each of the next two years on PCBs, an amount that would increase as the Instruments business grew. In re cent years, the performance of some contract manufacturers had been unsatisfactory with respect to quality, delivery and/or responsiveness and Stryker had repeatedly found itself looking for new suppliers. More generally, contract manufacturers tended to operate on thin margins with scant capital. Ba nkruptcies were not uncommon, and even without bankruptcy, a financially weak supplier was simply less reliable. Given recent events and the shaky appearance of several current suppliers, Stryker Instruments had resolved to address the issue. Stryker Instruments’ manufacturing managers stud ied three options for improving the situation. Option #1 was to maintain the current basic sourcing policy for PCBs, but with important modifications.......

Words: 2568 - Pages: 11

Premium Essay

Case Study of Stryker Corporation

...1. (1) Option #3 was for Stryker Instruments to manufacture its own PCBs in its own facility near company headquarters. (2)Benefits for option 3: ● Better control the quality, delivery and cost; ● Maintain the business stability; ● Supply PCBs to other Stryker businesses; ● Be able to implement cost shift and avoid tax; (3) Risks for option 3: ● Carry the inventory; ● Incur large capital outlay and sunk cost; ● Increase headcount, payroll and other expenditures (materials, infrastructure, R&D, maintenance, PP&E and depreciation) of Stryker; ●Bear the risk that the equipment may be outdated; (4) Compared with option #1: ●Benefit: no capital outlay; to some extent can protect future against disruptions with lower cost; flexibility; ●Risk: instability in quality, cost, delivery and responsiveness; Compared with option #2: ●Benefit: can improve quality of the supplies by increasing business with the supplier; ●Risk: the possibility of bankruptcy and weak financial performance of supplier; the sole supplier can strongly affect Stryker’s performance; coordination problem. 2. (1) Followings are the key assumptions of our write up: ● Stryker Instruments incurred all capital expenditures including (construction and improvements, furnishings and non-manufacturing equipment, communication equipment and IT infrastructure and capital equipment) in year 2003, before the......

Words: 847 - Pages: 4

Halloween 2018 TRUEFRENCH TS MD XviD-SUPERNOEL | Dave Randolph-Mayhem Davis | O Lagosta BluRay Download Torrent Comédia / Ficção / Romance / Suspense Idioma: Inglês / Português 2016 MKV / MP4 Torrent DownloadVídeo 10 / Áudio 10Sinopse: Em um futuro próximo, uma lei proíbe que as pessoas fiquem solteiras. Qualquer homem ou mulher que não estiver em um relacionamento é preso e...