Free Essay

The 5s in Manufacturing

In: Business and Management

Submitted By zumiyori
Words 836
Pages 4
5-S, or the five pillars of the visual workplace, is a systematic process of workplace organization. When I ask manufacturing people about the components of 5-S, most of them don’t think they are relevant.

“That’s just a system of keeping things organized and clean, right? Oh yeah, and they have this crazy idea that toolboxes are bad.” Or, sometimes I hear: “Why make a big program out of cleaning up?”

5-S is not simply eliminating toolboxes and cleaning up. While the concepts are easy to understand, most companies have not implemented them. Implementation of 5-S has many benefits: higher quality, lower costs, reliable deliveries and improved safety … to name a few. These benefits are clearly relevant to any manufacturer, and they are not had simply by eliminating toolboxes and cleaning up.

The intent of 5-S is to have only what you need available in the workplace, a designated place for everything, a standard way of doing things and the discipline to maintain it. Created in Japan, the components of 5-S are: seiri, seiton, seiso, seiketsu and shitsuke. Translated to English, we have:

Sort: Remove all items from the workplace that are not needed for current production.
Set in order: Arrange needed items so that they are easy to find and put away. Items used often are placed closer to the employee.
Shine: Make sure everything is clean, functioning and ready to go.
Standardize: This is the method you use to maintain the first three S’s.
Sustain: Make a habit of properly maintaining correct procedures.
For the organization, this creates fewer defects, less waste, fewer delays, fewer injuries and fewer breakdowns. These advantages translate to lower cost and higher quality.

For the operator, the components of 5-S create a superior working environment. They give the operator an opportunity to provide creative input regarding how the workplace should be organized and laid out and how standard work should be done. Operators will be able to find things easily, every time. The workplace will be cleaner and safer. Jobs will be simpler and more satisfying with many obstacles and frustrations removed.

The first “S” (Sort) requires you to distinguish between what is needed and what is not needed. Then, it requires you to discard what is not needed. This is known as “red-tagging.” A team goes through all items (tools, equipment, material, etc.) and asks the question: “Do I need this to do my job on a regular basis?” Items that are used very infrequently or not used should be red-tagged. After determining what is actually needed, update all documentation to reflect the needed parts.

The second “S” (Set in Order) requires you to organize things so that they are easy to use, and label them so that anyone can find, use and return them to the correct place easily. Visual controls should be used where practicable in this activity; a visual control is any communication device used in the work environment that tells you at a glance how work should be done. The requirements for setting in order include:

Equipment and tool organization: Simple, organized storage with visual confirmation (you know exactly where it goes and if it is missing/empty with just a glance).
Tools and equipment used most frequently are closest to employee.
Workstations have a place for each tool, with no toolboxes or drawers that interfere with visibility and require unneeded motion to open and close.
Taping: Tape the floor to indicate areas of operations, parts, walkways, discrepant material and hazards.
Work instructions: Make sure these are current and at the workstation.
Signboard strategy:
- Indicate cell, product lines and workstations.

- Indicate production goals and status.

- Post area information boards with key status indicators (inventory, training, calibration etc).

Ergonomics: Follow ergonomic guidelines in work/tool design.
The third “S” (Shine) involves bringing the workspace back to proper order by the end of each day. It requires periodic (at least once daily) cleanup, responsible person(s) identified for cleanup, establishment of cleanup/restocking methods (tools, checklists, etc.), and periodic supervisor inspection.

The fourth “S” (Standardize) is the method by which you maintain the first three S’s. Organization, orderliness and cleanliness are maintained and made habitual by instituting 3-S duties into regular work routines. The methods need to be standardized and required company-wide.

The fifth “S” (Sustain) allows the organization to sustain its 5-S program. This requires:

an executive 5-S champion to ensure that 5-S becomes part of the culture; periodic walk-through inspections/audits with posted results; and,
5S performance measurement of workgroups.
Implementation of this final “S” is where most companies fall back into their old ways of doing things. Very often, 5-S is thought of as an activity rather than an element of company culture. Companies implement 5-S for several months only to find themselves back to their previous state. To make 5-S work, it is critical that performance be measured and that top management be committed.…...

Similar Documents

Premium Essay

Manufacturing

...Manufacturing: A brief global look by ??? April 9, 2011 Manufacturing is a key component of any country’s economy and many comparisons have been made between the United States (U.S.) and other countries. Since World War II the U.S. has been the leader of the manufacturing sector due mainly to the fact that the U.S. industrial plants were not devastated by the destruction of war as where most of Europe and Asia. This paper is a team effort and will give a brief look at the state of manufacturing and some of the incentives each government has used to entice the growth of manufacturing within their respective countries. The countries to be examined are the United States, China, Germany and Japan. You hear it on the news, read it in the newspapers and see the results in the stores that manufacturing is dead in the (U.S.); however, if you do a little research you find the U.S. is still the leader in manufacturing production. As Stephen Manning of the Associated Press acknowledged in a rare “just the facts” story in mid-February, the U.S. “by far remains the world’s leading manufacturer,” producing goods valued at a record $1.6 trillion in 2007 — nearly double the $811 billion produced a decade earlier. Indeed, the AP writer noted, “For every $1 of value produced in China’s factories [in 2007], America generated $2.50.” Not bad for a country that doesn’t produce anything anymore. Some other facts about U.S. manufacturing are: •The United States is the world’s...

Words: 4474 - Pages: 18

Free Essay

Pekeliling 5s

...: 00 JPA PANDUAN AMALAN 5S JABATAN PERKHIDMATAN AWAM MALAYSIA ISI KANDUNGAN PERKARA HALAMAN BAHAGIAN SATU : MENGENALI AMALAN 5S 1. 2. 3. Tujuan Latar Belakang Memahami Konsep Amalan 5S 3.1 3.2 3.3 3.4 3.5 3.6 4. Amalan 5S Prinsip Amalan 5S Faedah Melaksanakan Amalan 5S Hasil Yang Dijangka Dari Amalan 5S Tindakan Yang Bukan Amalan 5S Tentangan Terhadap Pelaksanaan Amalan 5S 1–3 4–7 7–8 8–9 9 10 10 10 1 1 Kunci Kejayaan Amalan 5S 4.1 Sokongan dan Komitmen Berterusan Dari Pengurusan Atasan 4.2 4.3 4.4 Membentuk Prasarana Yang Berkesan Mengadakan Sistem Komunikasi Yang Berkesan Melatih Semua Peringkat Anggota Untuk Mengamalkan Amalan 5S 4.5 4.6 4.7 4.8 Projek Perintis Amalan 5S – Model 5S Penandaarasan Amalan Terbaik Pelan Pelaksanaan Amalan 5S – Kitaran P-D-C-A Mengamalkan Penilaian Prestasi Dan Sistem Ganjaran 11 11 11 11 12 12 12 12 5. Penutup BAHAGIAN DUA : HALA TUJU AMALAN 5S JPA 1. 2. 3. Tujuan Latar Belakang Hala Tuju Amalan 5S JPA 3.1 3.2 3.3 Polisi Amalan 5S Slogan Amalan 5S JPA Logo Amalan 5S 13 14 14 13 13 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 4. Model Amalan 5S JPA Wawasan Amalan 5S JPA Misi Amalan 5S JPA Objektif Amalan 5S JPA Pendekatan Pelaksanaan Amalan 5S di JPA Warna Penandaan Ciri Keutamaan Amalan 5S di JPA Penumpuan Persekitaran Berkualiti Kunci Kejayaan Pelaksanaan Amalan 5S di JPA 14 14 14 – 15 15 15 – 16 16 16 17 17 17 Penutup BAHAGIAN TIGA : LANGKAH-LANGKAH PELAKSANAAN AMALAN 5S DI JPA 1. 2. 3. 4. Tujuan......

Words: 21732 - Pages: 87

Premium Essay

Lean Manufacturing

...Protection Agency Solid Waste and Emergency Response (5302W) Policy, Economics & Innovation (1807T) EPA100-R-03-005 October 2003 www.epa.gov/ innovation/lean.htm Lean Manufacturing and the Environment: Research on Advanced Manufacturing Systems and the Environment and Recommendations for Leveraging Better Environmental Performance ACKNOWLEDGMENTS This report was prepared for the U.S. Environmental Protection Agency's Office of Solid Waste and Emergency Response (OSWER) and Office of Policy, Economics, and Innovation (OPEI). Ross & Associates Environmental Consulting, Ltd. prepared this report for U.S. EPA under contract to Industrial Economics, Inc. (U.S. EPA Contract # 68-D9-9018). DISCLAIMER The observations articulated in this report and its appendices represent Ross & Associates’ interpretation of the research, case study information, and interviews with lean experts and do not necessarily represent the opinions of the organizations or lean experts interviewed or researched as part of this effort. U.S. Environmental Protection Agency (EPA) representatives have reviewed and approved this report, but this does not necessarily constitute EPA endorsement of the observations or recommendations presented in this report. Lean Manufacturing and the Environment: Research on Advanced Manufacturing Systems and the Environment and Recommendations for Leveraging Better Environmental Performance Table of Contents Executive Summary . . . . . . . . . . . . . .......

Words: 33834 - Pages: 136

Premium Essay

Plan of Activity (5s)

...CLMP Manufacturing Plan of activities (5s Principles) a. Rationale: This plan of activities will enable the organization to set goals in attaining and implementing the 5s in the workplace with unified vision, shared thoughts and values to be able to be competitive enough in the world of business for we believe that implementing 5s may lead the company to success. b. Objectives: * To introduce 5s to the organization and appreciate its importance; * To keep the workplace clean, providing a nice environment to work; * To increase productivity, maximize time; * To reduce costs and avoid meeting conflicts; * To provide a safety and humane workplace; * To establish happiness between employees while working; and * To eliminate all types of wastes. c. Organizational structure: Quality Management System Coordination 5s Chairman (Operation) Chairman Self Discipline (HR) Chairman Sweep (Maintenance) Chairman Sort (Sales and Marketing) Chairman Systematize (Finance, production) Chairman Standardized (Production) Evaluation Employees Supervisors Managers Duties and responsibilities: Sort Chairman -chairman responsible for determining the necessary and finding ways to eliminate waste. Sieton Chairman- Chairman responsible for identifying the arrangement of necessary items, equipment, tools into good order. SeisoChairman- responsible in maintaining the cleanliness, implementing a zero dust workplace. SeiketsuChairman-......

Words: 1256 - Pages: 6

Free Essay

Japanese 5s Techniques

... 5S SUMMARY 5S is a systematic approach to good house keeping. It is gaining a strong supporting most industries in Japan today, and there is an increasing number of companies which are implementing 5S with greater involvement of people within the organisation. Why is it becoming popular among companies in Japan? Simply because: 1) Workplaces become clean and better organised. 2) Shopfloor and office operation become easier and safer. 3) Results are visible to everyone – Insider and outsider. 4) Visible results enhance generation of more and new ideas. 5) People are automatically disciplined. 6) People become proud of clean and organised workplace. 7) Resultant good company Image generates more business, etc. Some significant benefits observed at companies practising 5S in Singapore include: 1. Happier people involvement 2. Greater people involvement. 3. Low employee turnover. 4. Increased number of suggestions. 5. Better use of floor space. 6. Less work-in-progress and inventories 7. Better flow of work 8. Low machine breakdown rates 9. Low accident rates 10. High yield of materials 11. High product quality 12. The assumption of why 5S is becoming so popular in Japan in recent years and now in other countries today is that it emphasises a people-oriented and also practice –oriented approach. 5S expects everyone – indeed, everyone to participate in it. It is based on the belief that every individual can contribute to improving his......

Words: 2300 - Pages: 10

Premium Essay

5s Concepts and Implementation Stages

...What to expect? GC 5S – 5 C concepts 5S implementation stages Examples 2 1 12/11/2013 GC Learn What 5S is and How it Applies to Any Industry Video 3 GC 5S – 5C 4 2 12/11/2013 5S - Seiri, Seiton, Seiso, Seiketsu and Shitsuke GC 5S is a tool within the arsenal of Lean Manufacturing, it is a lean tool that helps you to organize your workspace in a manner that is more efficient, safer and more visually appealing. It is not as some people think purely a housekeeping process, this is work place organisation. 5S is a methodical, sustainable approach to work place organization that when implemented correctly can give you efficiency savings of between 10% and 30%. These are not the only improvements, there are many benefits of 5S. 5S is not just applicable to the factory floor where most people would apply it, it is just as important to apply the principles of 5S in the lean office or even on your computer drives. 5 5S – 5C GC 6 3 12/11/2013 GC Implemen tation 7 5S Seiri or Sort - Stage 1 The first stage of 5S within lean manufacturing is that of Seiri or sort, removal of all clutter that is within the working area. This is a step that should be participated in by everyone. Obvious junk should treated as junk and skipped. be GC Items that are too heavy that are not required, in need of repair, or people are unsure of should be identified with a red tag. 8 4 12/11/2013 5S Seiri or Sort - Stage......

Words: 1246 - Pages: 5

Premium Essay

Manufacturing

...MANUFACTURING Manufacturing is the production of merchandise for use or sale using labor and machines, tools, chemical and biological processing, or formulation. The term may refer to a range of human activity, from handicraft to high tech, but is most commonly applied to industrial production, in which raw materials are transformed into finished goods on a large scale. Such finished goods may be used for manufacturing other, more complex products, such as aircraft, household appliances or automobiles, or sold to wholesalers, who in turn sell them to retailers, who then sell them to end users – the "consumers". FACTS ABOUT MANUFACTURING IN THE PHILIPPINES: * Manufacturing accounts for nearly 24% of the Philippines' total GDP, while manufactured goods comprise 90% of Philippine exports, including furniture and fixtures, transport equipment, petroleum products, miscellaneous manufactures, electrical machinery, leather products, beverages, paper and paper products, basic metal, fabricated metal products, non-metallic mineral products, rubber and plastic products, textiles, and many more. * The Philippines is now considered one of the most competitive areas for manufacturing. After the unfortunate events in Japan, flooding in Thailand, the rising costs of countries such as Vietnam and China, the Philippines now is in position to lead manufacturing growth in the Asia. * The bulk of the Philippine manufacturing industry is concentrated in Manila, the capital.......

Words: 1924 - Pages: 8

Premium Essay

Iphone 5s

...T-Mobile and AT&T. 4. Ease of use Apple has friendly design elements for both hardware and software parts of iphone, such as, Siri, 3.5mm audio and so on. Weaknesses 1. High price Apple’s products cost much more than its competitors devices. It becomes a weakness because consumers can easily choose lower price products with similar quality. 2. Less new products Apple releases one phone per year, but other competitors release lots of products for various types per year. 3. Apps are controlled by iOS Iphone is equipped with own Apple operation system, iOS. And Apps which work with IOS can only be downloaded from App Store. Opportunities 1. High demand of iPad and iPhone 5S When the new product releases, it’s very popular and high-demanded. Last year, new iphone 5S had high sales 2. Growth of smart phone markets  Growth of smart phone markets is a good opportunity to increase market share in these markets. 3. Obtaining patents through acquisitions Apple lacks of some patents to sustain its growth and the best way to acquire those patents is to acquire the firms holding them. In addition, Apple could develop new skills and competencies. 4. Increasing demand for cloud based services  Apple could expand its range of iCloud services and software. Threats 1. Rapid technological change One of the most severe threats Apple and the other companies is rapid technological change. Companies are under the pressure to release new products......

Words: 385 - Pages: 2

Premium Essay

5s and Poka Yoke Aplications

...5S and applications 5S may be the first step for the company to embrace Lean strategy. 5S stands for five different characters which are sort, set in order, shine, standardize, and sustain. The 5S system is a tool, or system that supports a philosophy of operating in an organized fashion. The philosophy that this system supports is one of discipline, efficiency, and attention to detail (Graban, 2009). The idea behind 5S is that if a workplace is clean and well laid out, the identification of waste is much easier (Sarkar, 2005). 5S is a way to help the company to reduce the waste and enhance possible profits. 5S is used by five different Japanese words which are seiri, seiton, seiso, seiketsu and shitsuke and these focus on effective workplace and work procedure (Graban, 2009). Seiri, which is sort in English, helps the company or any organization to distinguish the items into two different categories: used and non-used (Breyfogle,2010). Seiton means set in order and it is focusing on making efficiency in the workplace by rearranging all items in the company which will promote work flow. All the tools should be set in the place where can improve work flow and it is easy to find for job (BusinessKnowledgeSource.com, paragraph 4, 2010). Seiso means to clean and clear. This step focuses on cleaning and clearing any item and working environment (The 5S plan Lean manufacturing solution, 2008). Seiketsu means standardize. To keep the first three Ss as the standard all the time......

Words: 3396 - Pages: 14

Premium Essay

Rubric of 5s Project

...Rubric for 5S Project | | |NEEDS FURTHER |INCORPORATES | | |LACKS ESSENTIAL |DEVELOPMENT |BEST POL PRACTICES | | |FEATURES OF EFFECTIVE POL | | | | | |50% |100% | | |0% | | | | | |The project has essential POL features but has some of the |The project has the following strengths: | | |The project has one or more of |following weaknesses: |...

Words: 875 - Pages: 4

Free Essay

Manufacturing

...ME 303 MANUFACTURING ENGINEERING PROBLEM SETS Prepared by: Kamil Özden Ural Uluer Salih Alan Mehmet Bilal Atar PROBLEM SET FOR CHAPTER 2 Q2.1 A copper bar is to be cold rolled into a section which must have a min. tensile strength of 390 MPa. If the final cross-sectional area is 20.13 mm2 and assuming the flow properties of the workpiece material are given as K = 450 MPa, n = 0.33. Calculate the followings: a) The tensile strength of the annealed material. b) The initial diameter of the copper bar. Solution It is important to understand the question well. In this question, the copper bar is annealed first then a cold rolling operation is done on it. Initial diameter of the copper bar is same before and after the annealing operation. a) Flow stress of the plastically deformed bar could be shown as shown in Course Slides at UTS Then UTS of the original bar (no annealing, no cold working) is found as below: = 450 (0.33)0.33 = 312.12 MPa . As u u Since before necking occurs ( < n) area stays constant at the whole bar, the formula below could be used: By putting the area ratio into the formula (i) UTS of the annealed material is found as: b) For this question d0 can be found by using the ratio: if < n (which means necking is not started yet) with the UTScw value given in the question as UTScw = 390 MPa, to check the value So > n which means that necking started, then UTScw becomes equal to flow stress of the deformed material, Q2.2 A...

Words: 6030 - Pages: 25

Premium Essay

Manufacturing

...Vol. 3, No. 5 Modern Applied Science A Study of an Evaluation Model on Manufacturing Execution System in Paper-making Enterprises Zhihong Xu Key Lab for Paper Science and Technology of Ministry of Education Shandong Institute of Light Industry Shandong 250353, China E-mail: xzh1385@163.com Feng Huang The State Key Laboratory for Microbial Technology Shandong University, Shandong 250100, China Jiachuan Chen & Guihua Yang Key Lab for Paper Science and Technology of Ministry of Education Shandong Institute of Light Industry Shandong 250353, China Abstract Manufacturing execution system (MES) is a production management technology and real-time information system which lies between the enterprise upper layer (ERP) and the bottom layer (PLC/DCS) and faces to workshop layer. MES's concept, its functional model and its important status in the manufacture industry are introduced in this article. Based on the production practice in Kunshan Banknote Paper Mill, an evaluation model of EMS is set up. The model also has a certain reference value to the construction of management information system (MIS) for the relative industries. Keywords: Pulp and paper industry, Manufacturing execution system, Furzzy evaluating method 1. Introduction The construction of informationization has made considerable progress with years of development in domestic paper industry. Large and medium-sized paper-making enterprises has widely adopted Enterprise Resource Planning (ERP) for enterprise......

Words: 3133 - Pages: 13

Premium Essay

5s Paper

...Implementing 5S Workplace Organization Methodology Programs In Manufacturing Facilities 5S in the workplace Many manufacturing facilities have opted to follow the path towards a “5S” workplace organizational and housekeeping methodology as part of continuous improvement or lean manufacturing processes.   5S is a system to reduce waste and optimize productivity through maintaining an orderly workplace and using visual cues to achieve more consistent operational results (see chart below). The term refers to five steps – sort, set in order, shine, standardize, and sustain – that are also sometimes known as the 5 pillars of a visual workplace. 5S programs are usually implemented by small teams working together to get materials closer to operations, right at workers’ fingertips and organized and labeled to facilitate operations with the smallest amount of wasted time and materials.   The 5S system is a good starting point for all improvement efforts aiming to drive out waste from the manufacturing process, and ultimately improve a company’s bottom line by improving products and services, and lowering costs. Many companies are seeking to making operations more efficient, and the concept is especially attractive to older manufacturing facilities looking to improve the bottom line by reducing their costs.    “A place for everything, and everything in its place” is the mantra of the 5S method, and storage and workspace systems such as those provided by Lista International allow......

Words: 1685 - Pages: 7

Premium Essay

The Utilization of the 5s Management

...LITERATURE REVIEW 1 The utilization of the 5S management method was perceived to have improved the quality of healthcare services in a resource-poor facility in Senegal. In addition, the enhancement of the work environment by the application of the 5S management procedure was observed to have motivated staff in a healthcare facility where support constraints and other demotivating factors prevail. Although our outcomes cannot be generalized to other health facilities, they provide a viewpoint for assessing the applicability of the 5S management method, particularly to government healthcare facilities in resource-poor settings where a disorderly work environment serves as a potential bottleneck in providing sufficient healthcare services. Quantitative and qualitative research based on a larger-scale intervention would be needed to elaborate and validate these findings as well as to identify the cost-effectiveness of their integration into health systems’ management procedures. The findings of the research can then be used to develop and present policy options, particularly to government health authorities in low- and middle-income countries and representatives of donor agencies that provide support in such areas. Articles 1. Implementation of 5S management method for lean healthcare at a health center in Senegal: a qualitative study of staff perception. (7 April 2015) by Shogo Kanamori. References. 1. Gapp R, Fisher R, Kobayashi K. Implementing 5S within a Japanese......

Words: 293 - Pages: 2

Free Essay

Manufacturing

...Valery Marinov, Manufacturing Technology Cutting Forcess 71 5.3 CUTTING FORCES Introduction Cutting is a process of extensive stresses and plastic deformations. The high compressive and frictional contact stresses on the tool face result in a substantial cutting force F. chip tool F` cut F workpiece Total cutting force F and reaction force F` in orthogonal cutting Knowledge of the cutting forces is essential for the following reasons: v v v v proper design of the cutting tools proper design of the fixtures used to hold the workpiece and cutting tool calculation of the machine tool power selection of the cutting conditions to avoid an excessive distortion of the workpiece Cutting force components In orthogonal cutting, the total cutting force F is conveniently resolved into two components in the horizontal and vertical direction, which can be directly measured using a force measuring device called a dynamometer. If the force and force components are plotted at the tool point instead of at their actual points of application along the shear plane and tool face, we obtain a convenient and compact diagram. chip tool cut F FC FD workpiece Total cutting force F is conveniently resolved into horizontal component FC and vertical component FD The two force components act against the tool: ΠCutting force FC : this force is in the direction of primary motion. The cutting force constitutes about 70~80 % of the total force F and is used...

Words: 785 - Pages: 4

Kujibiki Unbalance | Watch Movie | High price